Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To:     Geert Uytterhoeven <geert+renesas@glider.be>,
        Magnus Damm <magnus.damm@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc:     linux-kernel@vger.kernel.org,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
        Biju Das <biju.das.jz@bp.renesas.com>,
        Prabhakar <prabhakar.csengg@gmail.com>
Subject: [PATCH v2 0/3] iWave G21D-Q7 enable flash, CAN and SD2 LED
Date:   Mon,  7 Sep 2020 16:55:38 +0100
Message-Id: <20200907155541.2011-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi All,

This patch series enables PCIe, SPI NOR flash, CAN0 and SD2 LED indication
on iWave G21D-Q7 board.

Patches apply on top of [1] and also dependent on patch [2]
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/
    renesas-devel.git/log/?h=renesas-arm-dt-for-v5.10
[2] https://patchwork.kernel.org/patch/11712541/

Cheers,
Prabhakar

v1->v2
* Set SD2 LED trigger GPIO as GPIO_ACTIVE_HIGH
* Added missing "msiof0_sync" in msiof0 pins
* Corrected to can1 interface on carrier board

Lad Prabhakar (3):
  ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
  ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
  ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication

 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

-- 
2.17.1