Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Tue, 8 Sep 2020 19:59:22 -0700
From:   Tao Ren <rentao.bupt@gmail.com>
To:     Eddie James <eajames@linux.ibm.com>
Cc:     linux-input@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
        linux-i2c@vger.kernel.org, joel@jms.id.au, andrew@aj.id.au,
        benh@kernel.crashing.org, brendanhiggins@google.com,
        dmitry.torokhov@gmail.com, robh+dt@kernel.org, wsa@kernel.org,
        ryan_chen@aspeedtech.com
Subject: Re: [PATCH v2 3/5] i2c: aspeed: Mask IRQ status to relevant bits
Message-ID: <20200909025921.GA3449@taoren-ubuntu-R90MNF91>
References: <20200908200101.64974-1-eajames@linux.ibm.com>
 <20200908200101.64974-4-eajames@linux.ibm.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200908200101.64974-4-eajames@linux.ibm.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, Sep 08, 2020 at 03:00:59PM -0500, Eddie James wrote:
> Mask the IRQ status to only the bits that the driver checks. This
> prevents excessive driver warnings when operating in slave mode
> when additional bits are set that the driver doesn't handle.
> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>

Reviewed-by: Tao Ren <rentao.bupt@gmail.com>

> ---
>  drivers/i2c/busses/i2c-aspeed.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> index 31268074c422..2a388911038a 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -69,6 +69,7 @@
>   * These share bit definitions, so use the same values for the enable &
>   * status bits.
>   */
> +#define ASPEED_I2CD_INTR_ALL				0xf000ffff
>  #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
>  #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
>  #define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
> @@ -604,6 +605,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>  	writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
>  	       bus->base + ASPEED_I2C_INTR_STS_REG);
>  	readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> +	irq_received &= ASPEED_I2CD_INTR_ALL;
>  	irq_remaining = irq_received;
>  
>  #if IS_ENABLED(CONFIG_I2C_SLAVE)
> -- 
> 2.26.2
>