Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Neil Armstrong <narmstrong@baylibre.com>
To:     khilman@baylibre.com, kishon@ti.com, balbi@kernel.org,
        martin.blumenstingl@googlemail.com
Cc:     linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Neil Armstrong <narmstrong@baylibre.com>,
        linux-usb@vger.kernel.org
Subject: [PATCH 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board
Date:   Wed,  9 Sep 2020 18:04:04 +0200
Message-Id: <20200909160409.8678-1-narmstrong@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The Amlogic AXG is close from the GXL Glue but with a single OTG PHY.

It needs the same init sequence as GXL & GXM, but it seems it doesn't need
the host disconnect bit.

The Glue driver reuses the already implemented GXL & GXM work.

The USB2 PHY driver needs a slight tweak to keep the OTG detection working.

Neil Armstrong (5):
  phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
  dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG
    Families USB Glue Bindings
  usb: dwc-meson-g12a: Add support for USB on AXG SoCs
  arm64: dts: meson-axg: add USB nodes
  arm64: dts: meson-axg-s400: enable USB OTG

 .../usb/amlogic,meson-g12a-usb-ctrl.yaml      | 22 +++++++-
 .../arm64/boot/dts/amlogic/meson-axg-s400.dts | 10 ++++
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi    | 51 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-gxl-usb2.c      |  3 +-
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 17 +++++++
 5 files changed, 101 insertions(+), 2 deletions(-)

-- 
2.22.0