Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200909114312.2863675-1-andrew@aj.id.au> <20200909114312.2863675-2-andrew@aj.id.au>
In-Reply-To: <20200909114312.2863675-2-andrew@aj.id.au>
From:   Joel Stanley <joel@jms.id.au>
Date:   Thu, 10 Sep 2020 01:52:04 +0000
Message-ID: <CACPK8XeOf1H2Cdo434DsAjDNGrohip_MZTSMMOh1nhspz2y7dA@mail.gmail.com>
Subject: Re: [PATCH 1/3] pinctrl: aspeed: Format pinconf debug consistent with pinmux
To:     Andrew Jeffery <andrew@aj.id.au>
Cc:     "open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        johnny_huang@aspeedtech.com,
        linux-aspeed <linux-aspeed@lists.ozlabs.org>,
        OpenBMC Maillist <openbmc@lists.ozlabs.org>,
        Linux ARM <linux-arm-kernel@lists.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, 9 Sep 2020 at 11:43, Andrew Jeffery <andrew@aj.id.au> wrote:
>
> When displaying which pinconf register and field is being touched, format the
> field mask so that it's consistent with the way the pinmux portion
> formats the mask.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>  drivers/pinctrl/aspeed/pinctrl-aspeed.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> index 53f3f8aec695..d8972911d505 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> @@ -539,9 +539,9 @@ int aspeed_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
>                 if (rc < 0)
>                         return rc;
>
> -               pr_debug("%s: Set SCU%02X[%lu]=%d for param %d(=%d) on pin %d\n",
> -                               __func__, pconf->reg, __ffs(pconf->mask),
> -                               pmap->val, param, arg, offset);
> +               pr_debug("%s: Set SCU%02X[0x%08X]=%d for param %d(=%d) on pin %d\n",


The pr_debug in pinmux-aspeed.c prints val as 0x%X. Did you want to do
that here?

> +                               __func__, pconf->reg, pconf->mask,
> +                               val, param, arg, offset);
>         }
>
>         return 0;
> --
> 2.25.1
>