Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Andrew Jeffery <andrew@aj.id.au>
To:     linux-gpio@vger.kernel.org
Cc:     linus.walleij@linaro.org, joel@jms.id.au,
        johnny_huang@aspeedtech.com, linux-aspeed@lists.ozlabs.org,
        openbmc@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/3] pinctrl: aspeed: AST2600 pinconf fixes
Date:   Thu, 10 Sep 2020 12:26:28 +0930
Message-Id: <20200910025631.2996342-1-andrew@aj.id.au>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hello,

The AST2600 pinctrl driver was missing support for bias control on the 1.8V
GPIO pins, and in the process of resolving that I discovered a couple of other
bugs that are fixed in the first two patches of the series.

v2 Tweaks some of the debug output and adds Joel's Reviewed-by tags.

v1 can be found here:

https://lore.kernel.org/linux-gpio/20200909114312.2863675-1-andrew@aj.id.au/

Please review!

Andrew

Andrew Jeffery (3):
  pinctrl: aspeed: Format pinconf debug consistent with pinmux
  pinctrl: aspeed: Use the right pinconf mask
  pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks

 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 17 +++++++++++++++++
 drivers/pinctrl/aspeed/pinctrl-aspeed.c    |  8 ++++----
 2 files changed, 21 insertions(+), 4 deletions(-)

-- 
2.25.1