Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits
To:     Brendan Higgins <brendanhiggins@google.com>
Cc:     linux-input@vger.kernel.org,
        devicetree <devicetree@vger.kernel.org>,
        linux-aspeed <linux-aspeed@lists.ozlabs.org>,
        linux-i2c@vger.kernel.org,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Joel Stanley <joel@jms.id.au>,
        Andrew Jeffery <andrew@aj.id.au>,
        Benjamin Herrenschmidt <benh@kernel.crashing.org>,
        wsa@kernel.org, rentao.bupt@gmail.com,
        Ryan Chen <ryan_chen@aspeedtech.com>
References: <20200909203059.23427-1-eajames@linux.ibm.com>
 <20200909203059.23427-4-eajames@linux.ibm.com>
 <CAFd5g46ghV7ArmM8LnMkGa-Nip_fT934+3cPOkVxS-b5odZXYw@mail.gmail.com>
From:   Eddie James <eajames@linux.ibm.com>
Message-ID: <b092f884-9aa9-5d0b-1a90-36af558e43a8@linux.ibm.com>
Date:   Thu, 10 Sep 2020 08:55:38 -0500
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.11.0
MIME-Version: 1.0
In-Reply-To: <CAFd5g46ghV7ArmM8LnMkGa-Nip_fT934+3cPOkVxS-b5odZXYw@mail.gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


On 9/10/20 4:00 AM, Brendan Higgins wrote:
> On Wed, Sep 9, 2020 at 1:31 PM Eddie James <eajames@linux.ibm.com> wrote:
>> Mask the IRQ status to only the bits that the driver checks. This
>> prevents excessive driver warnings when operating in slave mode
>> when additional bits are set that the driver doesn't handle.
>>
>> Signed-off-by: Eddie James <eajames@linux.ibm.com>
>> Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
> Sorry, looks like I didn't get my comment in in time.
>
> Looks good in principle. One minor comment below:
>
>> ---
>>   drivers/i2c/busses/i2c-aspeed.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
>> index 31268074c422..724bf30600d6 100644
>> --- a/drivers/i2c/busses/i2c-aspeed.c
>> +++ b/drivers/i2c/busses/i2c-aspeed.c
>> @@ -69,6 +69,7 @@
>>    * These share bit definitions, so use the same values for the enable &
>>    * status bits.
>>    */
>> +#define ASPEED_I2CD_INTR_RECV_MASK                     0xf000ffff
> Could we define ASPEED_I2CD_INTR_RECV_MASK to be ASPEED_I2CD_INTR_ALL ?


That was my original thought... there is another define for that already 
a few lines down though.


Thanks,

Eddie


>
>>   #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT                        BIT(14)
>>   #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE              BIT(13)
>>   #define ASPEED_I2CD_INTR_SLAVE_MATCH                   BIT(7)
>> @@ -604,6 +605,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>>          writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
>>                 bus->base + ASPEED_I2C_INTR_STS_REG);
>>          readl(bus->base + ASPEED_I2C_INTR_STS_REG);
>> +       irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
>>          irq_remaining = irq_received;
>>
>>   #if IS_ENABLED(CONFIG_I2C_SLAVE)
>> --
>> 2.26.2
>>