Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jonathan Marek <jonathan@marek.ca>
To:     linux-arm-msm@vger.kernel.org
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 2/7] arm64: dts: qcom: sdm845-dispcc: same name for dp_phy clocks as sc7180
Date:   Fri, 11 Sep 2020 11:34:02 -0400
Message-Id: <20200911153412.21672-3-jonathan@marek.ca>
In-Reply-To: <20200911153412.21672-1-jonathan@marek.ca>
References: <20200911153412.21672-1-jonathan@marek.ca>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This makes it easier to combine dt bindings for sdm845/sc7180 dispcc.

Note: nothing upstream provides these clocks and the sdm845 dispcc driver
hasn't switched to using .fw_name for these clocks (these properties are
ignored), so changing this shouldn't be a problem.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2884577dcb77..8184d6204b33 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4139,8 +4139,8 @@ dispcc: clock-controller@af00000 {
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dsi1_phy_pll_out_byteclk",
 				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux";
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-- 
2.26.1