Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 14 Sep 2020 14:08:40 -0600
From:   Rob Herring <robh@kernel.org>
To:     Piyush Mehta <piyush.mehta@xilinx.com>
Cc:     axboe@kernel.dk, p.zabel@pengutronix.de, linux-ide@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        git@xilinx.com, sgoud@xilinx.com, michal.simek@xilinx.com
Subject: Re: [PATCH 2/2] dt-bindings: ata: achi: ceva: Update documentation
 for CEVA Controller
Message-ID: <20200914200840.GA152914@bogus>
References: <1599030348-3334-1-git-send-email-piyush.mehta@xilinx.com>
 <1599030348-3334-3-git-send-email-piyush.mehta@xilinx.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1599030348-3334-3-git-send-email-piyush.mehta@xilinx.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, Sep 02, 2020 at 12:35:48PM +0530, Piyush Mehta wrote:
> This patch updates the documentation for the CEVA controller for adding
> the required properties for 'phys' and 'resets'.
> 
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> ---
>  Documentation/devicetree/bindings/ata/ahci-ceva.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
> index 7561cc4..f01d317 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
> @@ -35,6 +35,10 @@ Required properties:
>  			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
>  			RIT:  Retry Interval Timer.
>  			RCT:  Rate Change Timer.
> +  - phys: phandle for the PHY device
> +  - phy-names: Should be "sata-phy"
> +  - resets: phandle to the reset controller for the SATA IP
> +  - reset-names: Should be "sata_rst".

The names here are rather pointless. You don't really need them if only 
1 entry.

>  
>  Optional properties:
>    - ceva,broken-gen2: limit to gen1 speed instead of gen2.
> @@ -56,4 +60,8 @@ Examples:
>  		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
>  		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
>  		ceva,broken-gen2;
> +		phy-names = "sata-phy";
> +		phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
> +		reset-names = "sata_rst";
> +		resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
>  	};
> -- 
> 2.7.4
>