Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Tue, 15 Sep 2020 00:16:23 +0000
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     satya priya <skakit@codeaurora.org>
Cc:     Matthias Kaehlcke <mka@chromium.org>, gregkh@linuxfoundation.org,
        Andy Gross <agross@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, akashast@codeaurora.org,
        rojay@codeaurora.org, msavaliy@qti.qualcomm.com,
        dianders@chromium.org
Subject: Re: [PATCH V6 0/4] Add wakeup support over UART RX
Message-ID: <20200915001623.GB471@uller>
References: <1600091917-7464-1-git-send-email-skakit@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1600091917-7464-1-git-send-email-skakit@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon 14 Sep 13:58 UTC 2020, satya priya wrote:

> Changes in V2:
>  - As per Matthias's comment added wakeup support for all the UARTs
>    of SC7180.
>  - Added sleep state in sc7180-idp.dts file.
>  - Modify the if check in set_mctrl API in serial driver to avoid
>    making RFR high during suspend.
> 
> Changes in V3:
>  - As per Matthias's comments modify the idp dts pin config to keep
>    only the required pin settings.
>  - Remove the extra parentheses from serial driver patch.
> 
> Changes in V4:
>  - As per Matthias's comments, change the commit text to mention why
>    GPIO function needs to be selected in sleep.
>  - Add separate patch for improvements made in pin conf settings.
> 
> Changes in V5:
>  - Moved pinctrl and interrupt configuration to board specific files.
>  - Added new patch for trogdor board specific changes.
> 
> Changes in V6:
>  - As per Doug's comments, fixed nits in patch 2 and 3.
>  - As per Bjorn's comments changed the commit text and rationale for
>    rts, tx and rx in patch 2 and 3.
> 
> satya priya (4):
>   arm64: dts: qcom: sc7180: Improve the uart3 pin config for sc7180-idp
>   arm64: dts: qcom: sc7180: Add wakeup support for BT UART on sc7180-idp
>   arm64: dts: qcom: sc7180-trogdor: Add wakeup support for BT UART

Applied these...

>   tty: serial: qcom_geni_serial: Fix the UART wakeup issue

...expecting Greg to pick this one up.

Thanks,
Bjorn

> 
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 65 +++++++++++++++++++++++++---
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 54 +++++++++++++++++++++++
>  drivers/tty/serial/qcom_geni_serial.c        |  2 +-
>  3 files changed, 114 insertions(+), 7 deletions(-)
> 
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>