Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 16 Sep 2020 02:01:35 +0300
From:   Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To:     Swapnil Jakhade <sjakhade@cadence.com>
Cc:     vkoul@kernel.org, kishon@ti.com, linux-kernel@vger.kernel.org,
        maxime@cerno.tech, mparab@cadence.com, yamonkar@cadence.com,
        nsekhar@ti.com, tomi.valkeinen@ti.com, jsarha@ti.com,
        praneeth@ti.com
Subject: Re: [PATCH v6 2/2] phy: cadence-torrent: Set Torrent PHY attributes
Message-ID: <20200915230135.GC14954@pendragon.ideasonboard.com>
References: <1599805114-22063-1-git-send-email-sjakhade@cadence.com>
 <1599805114-22063-3-git-send-email-sjakhade@cadence.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <1599805114-22063-3-git-send-email-sjakhade@cadence.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Swapnil,

Thank you for the patch.

On Fri, Sep 11, 2020 at 08:18:34AM +0200, Swapnil Jakhade wrote:
> Set Torrent PHY attributes bus_width, max_link_rate and mode
> for DisplayPort.
> 
> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/phy/cadence/phy-cadence-torrent.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
> index 7116127358ee..116aca36f7dd 100644
> --- a/drivers/phy/cadence/phy-cadence-torrent.c
> +++ b/drivers/phy/cadence/phy-cadence-torrent.c
> @@ -1852,6 +1852,10 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
>  				 cdns_phy->phys[node].num_lanes,
>  				 cdns_phy->max_bit_rate / 1000,
>  				 cdns_phy->max_bit_rate % 1000);
> +
> +			gphy->attrs.bus_width = cdns_phy->phys[node].num_lanes;
> +			gphy->attrs.max_link_rate = cdns_phy->max_bit_rate;
> +			gphy->attrs.mode = PHY_MODE_DP;
>  		} else {
>  			dev_err(dev, "Driver supports only PHY_TYPE_DP\n");
>  			ret = -ENOTSUPP;

-- 
Regards,

Laurent Pinchart