Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 16 Sep 2020 09:19:46 +0300
From:   Petko Manolov <petkan@nucleusys.com>
To:     Anant Thazhemadam <anant.thazhemadam@gmail.com>
Cc:     linux-kernel-mentees@lists.linuxfoundation.org,
        syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>, linux-usb@vger.kernel.org,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [Linux-kernel-mentees][PATCH] rtl8150: set memory to all 0xFFs
 on failed register reads
Message-ID: <20200916061946.GA38262@p310>
References: <20200916050540.15290-1-anant.thazhemadam@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200916050540.15290-1-anant.thazhemadam@gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 20-09-16 10:35:40, Anant Thazhemadam wrote:
> get_registers() copies whatever memory is written by the
> usb_control_msg() call even if the underlying urb call ends up failing.

Not true, memcpy() is only called if "ret" is positive.

> If get_registers() fails, or ends up reading 0 bytes, meaningless and junk 
> register values would end up being copied over (and eventually read by the 
> driver), and since most of the callers of get_registers() don't check the 
> return values of get_registers() either, this would go unnoticed.

usb_control_msg() returns negative on error (look up usb_internal_control_msg() 
to see for yourself) so it does not go unnoticed.  If for some reason it return 
zero, nothing is copied.  Also, if usb transfer fail no register values are 
being copied anywhere.

Your patch also allows for memcpy() to be called with 'size' either zero or 
greater than the allocated buffer size. Please, look at the code carefully.

> It might be a better idea to try and mirror the PCI master abort
> termination and set memory to 0xFFs instead in such cases.

I wasn't aware drivers are now responsible for filling up the memory with 
anything.  Does not sound like a good idea to me.

> Fixes: https://syzkaller.appspot.com/bug?extid=abbc768b560c84d92fd3
> Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com
> Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com
> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>

Well, NACK from me.


cheers,
Petko


> ---
>  drivers/net/usb/rtl8150.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> index 733f120c852b..04fca7bfcbcb 100644
> --- a/drivers/net/usb/rtl8150.c
> +++ b/drivers/net/usb/rtl8150.c
> @@ -162,8 +162,13 @@ static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
>  	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
>  			      RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
>  			      indx, 0, buf, size, 500);
> -	if (ret > 0 && ret <= size)
> +
> +	if (ret < 0)
> +		memset(data, 0xff, size);
> +
> +	else
>  		memcpy(data, buf, ret);
> +
>  	kfree(buf);
>  	return ret;
>  }
> @@ -276,7 +281,7 @@ static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
>  
>  static inline void set_ethernet_addr(rtl8150_t * dev)
>  {
> -	u8 node_id[6];
> +	u8 node_id[6] = {0};
>  
>  	get_registers(dev, IDR, sizeof(node_id), node_id);
>  	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
> -- 
> 2.25.1
> 
>