Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751405AbWHCXxP (ORCPT ); Thu, 3 Aug 2006 19:53:15 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751403AbWHCXxP (ORCPT ); Thu, 3 Aug 2006 19:53:15 -0400 Received: from bm-2a.paradise.net.nz ([203.96.152.181]:11473 "EHLO linda-2.paradise.net.nz") by vger.kernel.org with ESMTP id S1751405AbWHCXxO (ORCPT ); Thu, 3 Aug 2006 19:53:14 -0400 Date: Fri, 04 Aug 2006 11:53:04 +1200 From: Theuns Verwoerd Subject: [PATCH 001/001] I2C: AD7414 I2C chip driver for Linux-2.6.17.7 To: r.marek@sh.cvut.cz Cc: linux-kernel@vger.kernel.org Message-id: <44D28C60.1000304@bluewatersys.com> MIME-version: 1.0 Content-type: text/plain; format=flowed; charset=ISO-8859-1 Content-transfer-encoding: 7bit User-Agent: Thunderbird 1.5.0.2 (X11/20060522) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12740 Lines: 367 AD7414 Temperature Sensor I2C driver. I2C chip driver for the Analog Devices AD7414 device, exposes raw and decoded registers via sysfs. Signed-off-by: Theuns Verwoerd --- Tested on a custom EP9315-based board developed in-house. Fairly trivial driver; really just exposes the raw registers and temperature reading to userspace. Patch is relative to stock Linux-2.6.17.7 [This is my first go at a kernel submission, so feel free to point out anything that should be done differently] --- diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff linux-2.6.17.7-vanilla/drivers/i2c/chips/ad7414.c linux-2.6.17.7/drivers/i2c/chips/ad7414.c --- linux-2.6.17.7-vanilla/drivers/i2c/chips/ad7414.c 1970-01-01 12:00:00.000000000 +1200 +++ linux-2.6.17.7/drivers/i2c/chips/ad7414.c 2006-08-04 10:28:37.000000000 +1200 @@ -0,0 +1,283 @@ +/* + * AD7414 I2C Chip Driver + * + * Copyright (C) 2006 Theuns Verwoerd, Bluewater Systems (theuns.verwoerd@bluewatersys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * Simple I2C driver for Analog Devices AD7414 temperature sensor. + * Based on: lm75.c + * + */ + +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x4a, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ad7414); + +/* AD7414 Registers */ +#define AD7414_REG_TEMP 0 +#define AD7414_REG_CONF 1 +#define AD7414_REG_TEMP_HIGH 2 +#define AD7414_REG_TEMP_LOW 3 + +/* Each client has this additional data */ +struct ad7414_data { + struct i2c_client client; + struct class_device *class_dev; + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + u16 temp_value; /* Register values */ + u16 temp_config; + u16 temp_high; + u16 temp_low; +}; + +static int ad7414_attach_adapter(struct i2c_adapter *adapter); +static int ad7414_detect(struct i2c_adapter *adapter, int address, + int kind); +static int ad7414_detach_client(struct i2c_client *client); +static struct ad7414_data *ad7414_update_device(struct device *dev); +static int ad7414_ADC_to_temp(int ADC); + +/* This is the driver that will be inserted */ +static struct i2c_driver ad7414_driver = { + .driver = { + .name = "ad7414", + }, + .id = I2C_DRIVERID_AD7414, + .attach_adapter = ad7414_attach_adapter, + .detach_client = ad7414_detach_client, +}; + +#define show_raw(value) \ +static ssize_t show_raw_##value(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct ad7414_data *data = ad7414_update_device(dev); \ + \ + return sprintf(buf, "0x%x\n", data->value); \ +} +show_raw(temp_value); +show_raw(temp_config); +show_raw(temp_high); +show_raw(temp_low); + +#define show(value) \ +static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct ad7414_data *data = ad7414_update_device(dev); \ + \ + return sprintf(buf, "%dC\n", data->value); \ +} +show(temp_high); +show(temp_low); + +static ssize_t show_temp_value(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d.%02uC %s%s%s\n", + ad7414_ADC_to_temp(data->temp_value) / 100, + abs(ad7414_ADC_to_temp(data->temp_value)) % 100, + data->temp_value & 0x20 ? "ALERT " : "", + data->temp_value & 0x10 ? "THIGH " : "", + data->temp_value & 0x20 ? "TLOW " : ""); +} + +static ssize_t show_temp_config(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "0x%x %s%s%s%s%s%s%s\n", data->temp_config, + data->temp_config & 0x80 ? "POWEROFF " : "", + data->temp_config & 0x40 ? "NOFILTER " : "", + data->temp_config & 0x20 ? "NOALERT " : "", + data->temp_config & 0x10 ? "ALRTHIGH " : "ALRTLOW ", + data->temp_config & 0x08 ? "ALERTRST " : "", + data->temp_config & 0x04 ? "ONESHOT " : "", + data->temp_config & 0x03 ? "TESTMODE " : ""); +} + +#define set_raw(value, reg) \ +static ssize_t set_raw_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct ad7414_data *data = i2c_get_clientdata(client); \ + int value = simple_strtoul(buf, NULL, 0); \ + \ + mutex_lock(&data->update_lock); \ + data->value = value; \ + i2c_smbus_write_byte_data(client, reg, value); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} +set_raw(temp_config, AD7414_REG_CONF); +set_raw(temp_high, AD7414_REG_TEMP_HIGH); +set_raw(temp_low, AD7414_REG_TEMP_LOW); + +static DEVICE_ATTR(raw_config, S_IWUSR | S_IRUGO, show_raw_temp_config, + set_raw_temp_config); +static DEVICE_ATTR(raw_high, S_IWUSR | S_IRUGO, show_raw_temp_high, + set_raw_temp_high); +static DEVICE_ATTR(raw_low, S_IWUSR | S_IRUGO, show_raw_temp_low, + set_raw_temp_low); +static DEVICE_ATTR(raw_value, S_IRUGO, show_raw_temp_value, NULL); + +static DEVICE_ATTR(temp_config, S_IRUGO, show_temp_config, NULL); +static DEVICE_ATTR(temp_high, S_IRUGO, show_temp_high, NULL); +static DEVICE_ATTR(temp_low, S_IRUGO, show_temp_low, NULL); +static DEVICE_ATTR(temp_value, S_IRUGO, show_temp_value, NULL); + +static int ad7414_ADC_to_temp(int ADC) +{ + /* ADC temp is D15..D6, two's complement, but it's only 10 bits */ + ADC = ADC >> 6; + if (ADC > 0x200) { + return (((ADC & 0x1ff) - 512) * 100 / 4); + } else { + return (ADC * 100 / 4); + } +} + +static int ad7414_read_value(struct i2c_client *client, u8 reg) +{ + int value = ~0; + switch (reg) { + case AD7414_REG_TEMP: /* 10-bit register, MSB first */ + value = swab16(i2c_smbus_read_word_data(client, reg)); + break; + default: /* 8-bit register */ + value = i2c_smbus_read_byte_data(client, reg); + break; + } + return value; +} + +static int ad7414_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, ad7414_detect); +} + +/* This function is called by i2c_probe */ +static int ad7414_detect(struct i2c_adapter *adapter, int address, + int kind) +{ + struct i2c_client *new_client = NULL; + struct ad7414_data *data = NULL; + int err = 0; + + if (!i2c_check_functionality + (adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + goto error; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto error; + } + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &ad7414_driver; + new_client->flags = 0; + + /* Fill in the remaining client fields */ + strncpy(new_client->name, "ad7414", I2C_NAME_SIZE); + data->valid = 0; + mutex_init(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + err = i2c_attach_client(new_client); + if (err) + goto error; + + /* Register sysfs files */ + device_create_file(&new_client->dev, &dev_attr_raw_config); + device_create_file(&new_client->dev, &dev_attr_raw_high); + device_create_file(&new_client->dev, &dev_attr_raw_low); + device_create_file(&new_client->dev, &dev_attr_raw_value); + + device_create_file(&new_client->dev, &dev_attr_temp_config); + device_create_file(&new_client->dev, &dev_attr_temp_high); + device_create_file(&new_client->dev, &dev_attr_temp_low); + device_create_file(&new_client->dev, &dev_attr_temp_value); + + return 0; + + error: + kfree(data); + return err; +} + +static int ad7414_detach_client(struct i2c_client *client) +{ + struct ad7414_data *data = i2c_get_clientdata(client); + int err; + + err = i2c_detach_client(client); + if (err) { + dev_err(&client->dev, + "Client deregistration failed, client not detached.\n"); + return err; + } + kfree(data); + return 0; +} + +static struct ad7414_data *ad7414_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting ad7414 update\n"); + + data->temp_value = + ad7414_read_value(client, AD7414_REG_TEMP); + data->temp_config = + ad7414_read_value(client, AD7414_REG_CONF); + data->temp_high = + ad7414_read_value(client, AD7414_REG_TEMP_HIGH); + data->temp_low = + ad7414_read_value(client, AD7414_REG_TEMP_LOW); + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init ad7414_init(void) +{ + return i2c_add_driver(&ad7414_driver); +} + +static void __exit ad7414_exit(void) +{ + i2c_del_driver(&ad7414_driver); +} + + +MODULE_AUTHOR("Theuns Verwoerd "); +MODULE_DESCRIPTION("AD7414 I2C driver"); +MODULE_LICENSE("GPL"); + +module_init(ad7414_init); +module_exit(ad7414_exit); diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff linux-2.6.17.7-vanilla/drivers/i2c/chips/Kconfig linux-2.6.17.7/drivers/i2c/chips/Kconfig --- linux-2.6.17.7-vanilla/drivers/i2c/chips/Kconfig 2006-07-25 15:36:01.000000000 +1200 +++ linux-2.6.17.7/drivers/i2c/chips/Kconfig 2006-08-04 10:21:13.000000000 +1200 @@ -25,6 +25,16 @@ config SENSORS_DS1374 This driver can also be built as a module. If so, the module will be called ds1374. +config SENSORS_AD7414 + tristate "Analog Devices AD7414-0 Temperature Sensor" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Analog Devices + AD7414-0 temperature sensor. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_EEPROM tristate "EEPROM reader" depends on I2C && EXPERIMENTAL diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff linux-2.6.17.7-vanilla/drivers/i2c/chips/Makefile linux-2.6.17.7/drivers/i2c/chips/Makefile --- linux-2.6.17.7-vanilla/drivers/i2c/chips/Makefile 2006-07-25 15:36:01.000000000 +1200 +++ linux-2.6.17.7/drivers/i2c/chips/Makefile 2006-08-04 10:18:48.000000000 +1200 @@ -12,6 +12,7 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574 obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o +obj-$(CONFIG_SENSORS_AD7414) += ad7414.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff linux-2.6.17.7-vanilla/include/linux/i2c-id.h linux-2.6.17.7/include/linux/i2c-id.h --- linux-2.6.17.7-vanilla/include/linux/i2c-id.h 2006-07-25 15:36:01.000000000 +1200 +++ linux-2.6.17.7/include/linux/i2c-id.h 2006-08-04 10:10:39.000000000 +1200 @@ -112,6 +112,7 @@ #define I2C_DRIVERID_X1205 82 /* Xicor/Intersil X1205 RTC */ #define I2C_DRIVERID_PCF8563 83 /* Philips PCF8563 RTC */ #define I2C_DRIVERID_RS5C372 84 /* Ricoh RS5C372 RTC */ +#define I2C_DRIVERID_AD7414 85 /* AD7414 I2C Chip Driver */ #define I2C_DRIVERID_I2CDEV 900 #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/