Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 3/3] media: i2c: Introduce a driver for the Techwell
 TW9900 decoder
To:     Maxime Chevallier <maxime.chevallier@bootlin.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Heiko Stuebner <heiko@sntech.de>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc:     linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Paul Kocialkowski <paul.kocialkowski@bootlin.com>
References: <20200918142422.1086555-1-maxime.chevallier@bootlin.com>
 <20200918142422.1086555-4-maxime.chevallier@bootlin.com>
From:   Hans Verkuil <hverkuil-cisco@xs4all.nl>
Message-ID: <57c93f63-2450-aa43-7616-e3a763c95e36@xs4all.nl>
Date:   Fri, 25 Sep 2020 14:52:25 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.12.0
MIME-Version: 1.0
In-Reply-To: <20200918142422.1086555-4-maxime.chevallier@bootlin.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi Maxime,

Some comments below, this driver needs to be changed:

On 18/09/2020 16:24, Maxime Chevallier wrote:
> The Techwell video decoder supports PAL, NTSC and SECAM input formats,
> and outputs a BT.656 signal.
> 
> This commit adds support for this device, based on an implementation
> made by Rockchip. This implemention adds basic support for NTSC and PAL,
> and some basic brightness and contrast controls.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
>  drivers/media/i2c/Kconfig  |   9 +
>  drivers/media/i2c/Makefile |   1 +
>  drivers/media/i2c/tw9900.c | 671 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 681 insertions(+)
>  create mode 100644 drivers/media/i2c/tw9900.c
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index c7ba76fee599..9b9f97fa4335 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -426,6 +426,15 @@ config VIDEO_TW2804
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called tw2804.
>  
> +config VIDEO_TW9900
> +	tristate "Techwell TW9900 video decoder"
> +	depends on VIDEO_V4L2 && I2C
> +	help
> +	  Support for the Techwell tw9900 multi-standard video decoder
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called tw9900.
> +
>  config VIDEO_TW9903
>  	tristate "Techwell TW9903 video decoder"
>  	depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index f0a77473979d..cbc1d9aedd38 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
>  obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
>  obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
>  obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
> +obj-$(CONFIG_VIDEO_TW9900) += tw9900.o
>  obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
>  obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
>  obj-$(CONFIG_VIDEO_TW9910) += tw9910.o
> diff --git a/drivers/media/i2c/tw9900.c b/drivers/media/i2c/tw9900.c
> new file mode 100644
> index 000000000000..950a7bbda80d
> --- /dev/null
> +++ b/drivers/media/i2c/tw9900.c
> @@ -0,0 +1,671 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Techwell TW9900 multi-standard video decoder.
> + *
> + * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd.
> + * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@bootlin.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/sysfs.h>
> +#include <linux/timer.h>
> +#include <linux/delay.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define TW9900_REG_CHIP_ID	0x00
> +#define TW9900_REG_CHIP_STATUS  0x01
> +#define		TW9900_REG_CHIP_STATUS_VLOCK	0x08
> +#define		TW9900_REG_CHIP_STATUS_VDLOSS	0x80
> +#define TW9900_REG_OUT_FMT_CTL  0x03
> +#define TW9900_REG_CKHY_HSDLY   0x04
> +#define TW9900_REG_OUT_CTRL_I	0x05
> +#define TW9900_REG_ANALOG_CTL   0x06
> +#define TW9900_REG_CROP_HI	0x07
> +#define TW9900_REG_VDELAY_LO    0x08
> +#define TW9900_REG_VACTIVE_LO   0x09
> +#define TW9900_REG_HACTIVE_LO	0x0B
> +#define TW9900_REG_CNTRL1	0x0C
> +#define TW9900_REG_BRIGHT_CTL   0x10
> +#define TW9900_REG_CONTRAST_CTL 0x11
> +#define TW9900_REG_VBI_CNTL	0x19
> +#define TW9900_REG_ANAL_CTL_II  0x1A
> +#define TW9900_REG_OUT_CTRL_II	0x1B
> +#define TW9900_REG_STD_SEL      0x1C
> +#define TW9900_REG_MISSCNT      0x26
> +#define TW9900_REG_MISC_CTL_II  0x2F
> +#define TW9900_REG_VVBI         0x55
> +
> +#define TW9900_CHIP_ID		0x00
> +
> +#define REG_SC_CTRL_MODE		TW9900_REG_OUT_FMT_CTL
> +#define     SC_CTRL_MODE_STANDBY	0xA7
> +#define     SC_CTRL_MODE_STREAMING	0xA0
> +
> +#define REG_NULL			0xFF
> +
> +#define VSYNC_POLL_INTERVAL_MS  20
> +#define VSYNC_WAIT_MAX_POLLS    50
> +
> +static const char * const tw9900_supply_names[] = {
> +	"vdd",
> +};
> +
> +#define TW9900_NUM_SUPPLIES ARRAY_SIZE(tw9900_supply_names)
> +
> +struct regval {
> +	u8 addr;
> +	u8 val;
> +};
> +
> +struct tw9900_mode {
> +	u32 width;
> +	u32 height;
> +	u32 skip_top;
> +	u32 std;
> +	u32 field;
> +	const struct regval *reg_list;
> +};
> +
> +struct tw9900 {
> +	struct i2c_client	*client;
> +	struct gpio_desc	*reset_gpio;
> +	struct regulator_bulk_data supplies[TW9900_NUM_SUPPLIES];
> +
> +	bool			streaming;
> +
> +	struct v4l2_subdev	subdev;
> +	struct v4l2_ctrl_handler hdl;
> +	struct media_pad	pad;
> +
> +	struct timer_list timer;
> +	struct work_struct work_i2c_poll;
> +
> +	const struct tw9900_mode *cur_mode;
> +};
> +
> +#define to_tw9900(sd) container_of(sd, struct tw9900, subdev)
> +
> +static const struct regval tw9900_init_regs[] = {
> +	{TW9900_REG_MISC_CTL_II,	0xE6},
> +	{TW9900_REG_MISSCNT,		0x24},
> +	{TW9900_REG_OUT_FMT_CTL,	0xA7},
> +	{TW9900_REG_ANAL_CTL_II,	0x0A},
> +	{TW9900_REG_VDELAY_LO,		0x19},
> +	{TW9900_REG_STD_SEL,		0x00},
> +	{TW9900_REG_VACTIVE_LO,		0xF0},
> +	{TW9900_REG_STD_SEL,		0x07},
> +	{TW9900_REG_CKHY_HSDLY,		0x40},
> +	{TW9900_REG_ANALOG_CTL,		0x80},
> +	{TW9900_REG_CNTRL1,		0xdc},
> +	{TW9900_REG_OUT_CTRL_I,		0x98},
> +	{REG_NULL, 0x0},
> +};
> +
> +static const struct regval tw9900_yuv_regs[] = {
> +	{REG_NULL, 0x0},
> +};
> +
> +static const struct regval tw9900_pal_regs[] = {
> +	{TW9900_REG_STD_SEL, 0x01},
> +	{REG_NULL, 0x0},
> +};
> +
> +static const struct regval tw9900_ntsc_regs[] = {
> +	{TW9900_REG_OUT_FMT_CTL, 0xA4},
> +	{TW9900_REG_VDELAY_LO, 0x12},
> +	{TW9900_REG_VACTIVE_LO, 0xf0},
> +	{TW9900_REG_CROP_HI, 0x02},
> +	{TW9900_REG_HACTIVE_LO, 0xD0},
> +	{TW9900_REG_VBI_CNTL, 0x01},
> +	{TW9900_REG_STD_SEL, 0x00},
> +	{REG_NULL, 0x0},
> +};
> +
> +static const struct tw9900_mode supported_modes[] = {
> +	{
> +		.width = 720,
> +		.height = 576,
> +		.skip_top = 0,
> +		.std = V4L2_STD_PAL,
> +		.field = V4L2_FIELD_NONE,
> +		.reg_list = tw9900_pal_regs,
> +	},
> +	{
> +		.width = 720,
> +		.height = 480,
> +		.skip_top = 0,
> +		.std = V4L2_STD_NTSC,
> +		.field = V4L2_FIELD_NONE,
> +		.reg_list = tw9900_ntsc_regs,
> +	},
> +};
> +
> +static int tw9900_write_reg(struct i2c_client *client, u8 reg, u8 val)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, reg, val);
> +
> +	if (ret < 0)
> +		dev_err(&client->dev, "write reg error: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static int tw9900_write_array(struct i2c_client *client,
> +			      const struct regval *regs)
> +{
> +	int i, ret = 0;
> +
> +	for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
> +		ret = tw9900_write_reg(client, regs[i].addr, regs[i].val);
> +
> +	return ret;
> +}
> +
> +static inline u8 tw9900_read_reg(struct i2c_client *client, u8 reg)
> +{
> +	return i2c_smbus_read_byte_data(client, reg);
> +}
> +
> +static void tw9900_fill_fmt(const struct tw9900_mode *mode,
> +			    struct v4l2_mbus_framefmt *fmt)
> +{
> +	fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
> +	fmt->width = mode->width;
> +	fmt->height = mode->height;
> +	fmt->field = mode->field;
> +	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
> +}
> +
> +static int tw9900_find_closest_mode_index(u32 width, u32 height)
> +{
> +	int i, best_score = 0, score, best = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
> +		score = abs(supported_modes[i].width - width) +
> +			abs(supported_modes[i].height - height);
> +
> +		if (best_score > score) {
> +			best_score = score;
> +			best = i;
> +		}
> +	}
> +
> +	return best;
> +}
> +
> +static int tw9900_find_mode_index(u32 width, u32 height)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(supported_modes); i++)
> +		if (supported_modes[i].width == width &&
> +		    supported_modes[i].height == height)
> +			return i;
> +
> +	/* No match, find the closestmatch */
> +	return tw9900_find_closest_mode_index(width, height);
> +}
> +
> +static int tw9900_set_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_pad_config *cfg,
> +			  struct v4l2_subdev_format *fmt)
> +{
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> +	int mode_index = tw9900_find_mode_index(mbus_fmt->width,
> +						mbus_fmt->height);
> +
> +	if (mode_index < 0)
> +		return -EINVAL;
> +
> +	tw9900->cur_mode = &supported_modes[mode_index];
> +
> +	tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt);
> +
> +	/* Update the dimensions in case we don't have a perfect match */
> +	mbus_fmt->width = tw9900->cur_mode->width;
> +	mbus_fmt->height = tw9900->cur_mode->height;
> +
> +	return 0;
> +}
> +
> +static int tw9900_get_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_pad_config *cfg,
> +			  struct v4l2_subdev_format *fmt)
> +{
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> +
> +	tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt);
> +
> +	return 0;
> +}
> +
> +static int tw9900_enum_mbus_code(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_pad_config *cfg,
> +				 struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	code->code = MEDIA_BUS_FMT_UYVY8_2X8;
> +
> +	return 0;
> +}
> +
> +static int tw9900_enum_frame_sizes(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_pad_config *cfg,
> +				   struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	u32 index = fse->index;
> +
> +	if (index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
> +
> +	fse->min_width  = supported_modes[index].width;
> +	fse->max_width  = supported_modes[index].width;
> +	fse->max_height = supported_modes[index].height;
> +	fse->min_height = supported_modes[index].height;
> +
> +	return 0;
> +}
> +
> +static int tw9900_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
> +{
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +
> +	*lines = tw9900->cur_mode->skip_top;
> +
> +	return 0;
> +}
> +
> +static int __tw9900_power_on(struct tw9900 *tw9900)
> +{
> +	int ret;
> +	struct device *dev = &tw9900->client->dev;
> +
> +	if (tw9900->reset_gpio)
> +		gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
> +
> +	ret = regulator_bulk_enable(TW9900_NUM_SUPPLIES, tw9900->supplies);
> +	if (ret < 0)
> +		goto error;
> +
> +	usleep_range(50000, 52000);
> +
> +	if (tw9900->reset_gpio)
> +		gpiod_set_value_cansleep(tw9900->reset_gpio, 0);
> +
> +	usleep_range(1000, 2000);
> +
> +	ret = tw9900_write_array(tw9900->client, tw9900_init_regs);
> +	if (ret) {
> +		dev_err(dev, "Failed to init tw9900\n");
> +		goto error;
> +	}
> +
> +	return 0;
> +
> +error:
> +
> +	return ret;
> +}
> +
> +static void __tw9900_power_off(struct tw9900 *tw9900)
> +{
> +	if (tw9900->reset_gpio)
> +		gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
> +
> +	regulator_bulk_disable(TW9900_NUM_SUPPLIES, tw9900->supplies);
> +}
> +
> +static int tw9900_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct tw9900 *tw9900 = container_of(ctrl->handler, struct tw9900, hdl);
> +
> +	if (pm_runtime_suspended(&tw9900->client->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_BRIGHTNESS:
> +		tw9900_write_reg(tw9900->client, 0x10, (u8)ctrl->val);
> +		break;
> +	case V4L2_CID_CONTRAST:
> +		tw9900_write_reg(tw9900->client, 0x11, (u8)ctrl->val);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int tw9900_s_stream(struct v4l2_subdev *sd, int on)
> +{
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +	struct i2c_client *client = tw9900->client;
> +	int i, ret = 0;
> +
> +	on = !!on;
> +	if (on == tw9900->streaming)
> +		goto unlock_and_return;
> +
> +	if (on) {
> +		ret = pm_runtime_get_sync(&tw9900->client->dev);
> +		if (ret < 0) {
> +			pm_runtime_put_noidle(&client->dev);
> +			goto unlock_and_return;
> +		}
> +
> +		ret = v4l2_ctrl_handler_setup(sd->ctrl_handler);
> +		if (ret) {
> +			pm_runtime_put(&client->dev);
> +			goto unlock_and_return;
> +		}
> +
> +		ret = tw9900_write_array(tw9900->client,
> +					 tw9900->cur_mode->reg_list);
> +		if (ret) {
> +			pm_runtime_put(&client->dev);
> +			goto unlock_and_return;
> +		}
> +
> +		/* Wait for VSync lock */
> +		for (i = 0; i < VSYNC_WAIT_MAX_POLLS; i++) {
> +			u8 status = tw9900_read_reg(tw9900->client,
> +						    TW9900_REG_CHIP_STATUS);
> +			if (!(status & TW9900_REG_CHIP_STATUS_VDLOSS) &&
> +			    (status & TW9900_REG_CHIP_STATUS_VLOCK))
> +				break;
> +
> +			msleep(VSYNC_POLL_INTERVAL_MS);
> +		}
> +
> +		ret = tw9900_write_reg(client, REG_SC_CTRL_MODE,
> +				       SC_CTRL_MODE_STREAMING);
> +		if (ret) {
> +			pm_runtime_put(&client->dev);
> +			goto unlock_and_return;
> +		}
> +
> +	} else {
> +		tw9900_write_reg(client, REG_SC_CTRL_MODE,
> +				 SC_CTRL_MODE_STANDBY);
> +		pm_runtime_put(&client->dev);
> +	}
> +
> +	tw9900->streaming = on;
> +
> +unlock_and_return:
> +
> +	return ret;
> +}
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +static int tw9900_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +	struct v4l2_mbus_framefmt *try_fmt;
> +
> +	try_fmt = v4l2_subdev_get_try_format(sd, fh->pad, 0);
> +
> +	/* Initialize try_fmt */
> +	tw9900_fill_fmt(tw9900->cur_mode, try_fmt);
> +
> +	return 0;
> +}
> +#endif
> +
> +static int tw9900_runtime_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +
> +	return __tw9900_power_on(tw9900);
> +}
> +
> +static int tw9900_runtime_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +
> +	__tw9900_power_off(tw9900);
> +
> +	return 0;
> +}
> +
> +static int tw9900_subscribe_event(struct v4l2_subdev *sd,
> +				  struct v4l2_fh *fh,
> +				  struct v4l2_event_subscription *sub)
> +{
> +	switch (sub->type) {
> +	case V4L2_EVENT_SOURCE_CHANGE:
> +		return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
> +	case V4L2_EVENT_CTRL:
> +		return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct dev_pm_ops tw9900_pm_ops = {
> +	SET_RUNTIME_PM_OPS(tw9900_runtime_suspend,
> +			   tw9900_runtime_resume, NULL)
> +};
> +
> +static const struct v4l2_subdev_core_ops tw9900_core_ops = {
> +	.subscribe_event = tw9900_subscribe_event,
> +	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +};
> +
> +static const struct v4l2_subdev_video_ops tw9900_video_ops = {
> +	.s_stream = tw9900_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops tw9900_pad_ops = {
> +	.enum_mbus_code = tw9900_enum_mbus_code,
> +	.enum_frame_size = tw9900_enum_frame_sizes,
> +	.get_fmt = tw9900_get_fmt,
> +	.set_fmt = tw9900_set_fmt,
> +};
> +
> +static struct v4l2_subdev_sensor_ops tw9900_sensor_ops = {
> +	.g_skip_top_lines	= tw9900_g_skip_top_lines,
> +};
> +
> +static const struct v4l2_subdev_ops tw9900_subdev_ops = {
> +	.core	= &tw9900_core_ops,
> +	.video	= &tw9900_video_ops,
> +	.pad	= &tw9900_pad_ops,
> +	.sensor = &tw9900_sensor_ops,
> +};

This is wrong. This is not a sensor, so you don't set the format, instead
you set the TV standard (s_std).

drivers/media/i2c/tw9910.c is a fairly OK template to use. The tw9910 supports
a simple scaler as well, but I don't know if the tw9900 has the same feature.
If not, then the format resolution is fixed based on the current selected
TV standard.

There is definitely no need for g_skip_top_lines: 1) it's a sensor-only op,
and 2) that function always returns 0, so why keep it?

> +
> +static const struct v4l2_ctrl_ops tw9900_ctrl_ops = {
> +	.s_ctrl = tw9900_s_ctrl,
> +};
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +static const struct v4l2_subdev_internal_ops tw9900_internal_ops = {
> +	.open = tw9900_open,
> +};
> +#endif
> +
> +static int tw9900_check_sensor_id(struct tw9900 *tw9900,

*Not* a sensor :-)

> +				  struct i2c_client *client)
> +{
> +	struct device *dev = &tw9900->client->dev;
> +	u8 id;
> +
> +	id = tw9900_read_reg(client, TW9900_CHIP_ID);
> +
> +	if (id != TW9900_CHIP_ID) {
> +		dev_err(dev, "Wrong camera sensor id(%04x)\n", id);
> +		return -EINVAL;
> +	}
> +
> +	dev_info(dev, "Detected TW9900 (%04x) sensor\n", TW9900_CHIP_ID);
> +
> +	return 0;
> +}
> +
> +static int tw9900_configure_regulators(struct tw9900 *tw9900)
> +{
> +	u32 i;
> +
> +	for (i = 0; i < TW9900_NUM_SUPPLIES; i++)
> +		tw9900->supplies[i].supply = tw9900_supply_names[i];
> +
> +	return devm_regulator_bulk_get(&tw9900->client->dev,
> +				       TW9900_NUM_SUPPLIES,
> +				       tw9900->supplies);
> +}
> +
> +static int tw9900_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct v4l2_ctrl_handler *hdl;
> +	struct tw9900 *tw9900;
> +	int ret;
> +
> +	tw9900 = devm_kzalloc(dev, sizeof(*tw9900), GFP_KERNEL);
> +	if (!tw9900)
> +		return -ENOMEM;
> +
> +	tw9900->client = client;
> +	tw9900->cur_mode = &supported_modes[0];
> +
> +	tw9900->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(tw9900->reset_gpio))
> +		tw9900->reset_gpio = NULL;
> +
> +	ret = tw9900_configure_regulators(tw9900);
> +	if (ret) {
> +		dev_err(dev, "Failed to get power regulators\n");
> +		return ret;
> +	}
> +
> +	v4l2_i2c_subdev_init(&tw9900->subdev, client, &tw9900_subdev_ops);
> +	tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> +
> +	hdl = &tw9900->hdl;
> +
> +	v4l2_ctrl_handler_init(hdl, 2);
> +
> +	v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_BRIGHTNESS,
> +			  -128, 127, 1, 0);
> +	v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_CONTRAST,
> +			  0, 255, 1, 0x60);
> +
> +	tw9900->subdev.ctrl_handler = hdl;
> +	if (hdl->error) {
> +		int err = hdl->error;
> +
> +		v4l2_ctrl_handler_free(hdl);
> +		return err;
> +	}
> +
> +	ret = __tw9900_power_on(tw9900);
> +	if (ret)
> +		return ret;
> +
> +	ret = tw9900_check_sensor_id(tw9900, client);
> +	if (ret)
> +		goto err_power_off;
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +	tw9900->subdev.internal_ops = &tw9900_internal_ops;
> +	tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +#endif
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> +	tw9900->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	tw9900->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;

Set to MEDIA_ENT_F_ATV_DECODER.

Regards,

	Hans

> +
> +	ret = media_entity_pads_init(&tw9900->subdev.entity, 1, &tw9900->pad);
> +	if (ret < 0)
> +		goto err_power_off;
> +#endif
> +
> +	ret = v4l2_async_register_subdev(&tw9900->subdev);
> +	if (ret) {
> +		dev_err(dev, "v4l2 async register subdev failed\n");
> +		goto err_clean_entity;
> +	}
> +
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +	pm_runtime_idle(dev);
> +
> +	return 0;
> +
> +err_clean_entity:
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> +	media_entity_cleanup(&tw9900->subdev.entity);
> +#endif
> +err_power_off:
> +	__tw9900_power_off(tw9900);
> +
> +	return ret;
> +}
> +
> +static int tw9900_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct tw9900 *tw9900 = to_tw9900(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> +	media_entity_cleanup(&sd->entity);
> +#endif
> +
> +	pm_runtime_disable(&client->dev);
> +	if (!pm_runtime_status_suspended(&client->dev))
> +		__tw9900_power_off(tw9900);
> +	pm_runtime_set_suspended(&client->dev);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id tw9900_id[] = {
> +	{"tw9900", 0},
> +	{},
> +};
> +
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id tw9900_of_match[] = {
> +	{ .compatible = "techwell,tw9900" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, tw9900_of_match);
> +#endif
> +
> +static struct i2c_driver tw9900_i2c_driver = {
> +	.driver = {
> +		.name = "tw9900",
> +		.pm = &tw9900_pm_ops,
> +		.of_match_table = tw9900_of_match
> +	},
> +	.probe		= tw9900_probe,
> +	.remove		= tw9900_remove,
> +	.id_table	= tw9900_id,
> +};
> +
> +module_i2c_driver(tw9900_i2c_driver);
> +
> +MODULE_DESCRIPTION("tw9900 sensor driver");
> +MODULE_LICENSE("GPL v2");
>