Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
        Rob Herring <robh+dt@kernel.org>,
        Thierry Reding <thierry.reding@gmail.com>,
        =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>, Lee Jones <lee.jones@linaro.org>,
        Martin Botka <martin.botka1@gmail.com>,
        linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        linux-pwm@vger.kernel.org
Subject: [PATCH v4 3/4] arm64: dts: qcom: msm8996: Add mpp and lpg blocks
Date:   Mon, 28 Sep 2020 20:15:43 -0700
Message-Id: <20200929031544.1000204-4-bjorn.andersson@linaro.org>
In-Reply-To: <20200929031544.1000204-1-bjorn.andersson@linaro.org>
References: <20200929031544.1000204-1-bjorn.andersson@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The pm8994 contains a 6 LPG channels. The pmi8994 contains 4 MPP
channels and a 4 channel LPG, with TRILED and LUT blocks.

Add nodes for these blocks.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v3:
- None

 arch/arm64/boot/dts/qcom/pm8994.dtsi  |  9 +++++++++
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 20 ++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 7e4f777746cb..b5bef687aa3c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -86,6 +86,15 @@ pmic@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8994_lpg: lpg {
+			compatible = "qcom,pm8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pm8994_spmi_regulators: regulators {
 			compatible = "qcom,pm8994-regulators";
 		};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index e5ed28ab9b2d..23f41328d191 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -19,6 +19,17 @@ pmi8994_gpios: gpios@c000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmi8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+		};
 	};
 
 	pmic@3 {
@@ -27,6 +38,15 @@ pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8994_lpg: lpg@b100 {
+			compatible = "qcom,pmi8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pmi8994_spmi_regulators: regulators {
 			compatible = "qcom,pmi8994-regulators";
 			#address-cells = <1>;
-- 
2.28.0