Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 1 Oct 2020 15:00:31 +0200
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     Schrempf Frieder <frieder.schrempf@kontron.de>
Cc:     Andreas Kemnade <andreas@kemnade.info>,
        Anson Huang <Anson.Huang@nxp.com>,
        Fabio Estevam <festevam@gmail.com>,
        Li Yang <leoyang.li@nxp.com>,
        Marcel Ziswiler <marcel.ziswiler@toradex.com>,
        Marco Felsch <m.felsch@pengutronix.de>,
        Michael Walle <michael@walle.cc>,
        NXP Linux Team <linux-imx@nxp.com>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Robert Jones <rjones@gateworks.com>,
        Rob Herring <robh@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        =?utf-8?Q?S=C3=A9bastien?= Szymanski 
        <sebastien.szymanski@armadeus.com>,
        Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] arm64: dts: Add the Kontron i.MX8M Mini SoMs and
 baseboards
Message-ID: <20201001130031.GC6082@kozik-lap>
References: <20201001120717.13027-1-frieder.schrempf@kontron.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20201001120717.13027-1-frieder.schrempf@kontron.de>
User-Agent: Mutt/1.9.4 (2018-02-28)
Precedence: bulk

On Thu, Oct 01, 2020 at 02:06:58PM +0200, Schrempf Frieder wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
> 
> Kontron Electronics GmbH offers small and powerful SoMs based on the
> i.MX8M Mini SoC including PMIC, LPDDR4-RAM, eMMC and SPI NOR.
> 
> The matching baseboards have the same form factor and similar interfaces
> as the other boards from the Kontron "Board-Line" family, including
> SD card, 1G Ethernet, 100M Ethernet, USB Host/OTG, digital IOs, RS232,
> RS485, CAN, LVDS or HDMI, RTC and much more.
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
> Changes for v3:
> * Remove needless status properties
> * Remove needless regulator properties for reg_vdd_5v
> * Use proper PHY reset properties in PHY node
> * Use phy-connection-type instead of phy-mode
> * Adjust PMIC node name and label
> * Add over-current-active-low to usbotg1 node
> * Remove redundant bus-width property from usdhc2 node
> * Remove needless regulator-compatible from reg_vdd_snvs
> * Set minimum voltage to 85mV for reg_vdd_snvs
> 
> Changes for v2:
> * Make the licensing less strict (GPL-2.0+ OR MIT)
> * Merge the SoM and baseboard DTs for N8010 and N8011 into one as
>   they only differ in DDR and eMMC size.
> * Change compatibles and model strings to "n810x" and "N8010X".
> * Only use a common memory node that will be updated by the
>   bootloader reflecting the detected DDR size.
> * Improve naming for 16MHz CAN fixed oscillator and set
>   "clock-output-names".
> * Consistently use "reg_" prefix for regulators.
> * Remove "userspi" node.
> * Slightly improve commit message.
> ---
>  .../dts/freescale/imx8mm-kontron-n801x-s.dts  | 323 ++++++++++++++++++
>  .../freescale/imx8mm-kontron-n801x-som.dtsi   | 293 ++++++++++++++++
>  2 files changed, 616 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi

Ah, and one more issue - missing Makefile entry? This won't build.

Best regards,
Krzysztof