Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   =?UTF-8?q?=C5=81ukasz=20Stelmach?= <l.stelmach@samsung.com>
To:     Kukjin Kim <kgene@kernel.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Tomasz Figa <tomasz.figa@gmail.com>,
        Andi Shyti <andi@etezian.org>, Mark Brown <broonie@kernel.org>,
        linux-spi@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     m.szyprowski@samsung.com, b.zolnierkie@samsung.com,
        =?UTF-8?q?=C5=81ukasz=20Stelmach?= <l.stelmach@samsung.com>
Subject: [PATCH v2 RESEND 5/9] spi: spi-s3c64xx: Rename S3C64XX_SPI_SLAVE_*
 to S3C64XX_SPI_CS_*
Date:   Thu,  1 Oct 2020 17:21:44 +0200
Message-Id: <20201001152148.29747-6-l.stelmach@samsung.com>
In-Reply-To: <20201001152148.29747-1-l.stelmach@samsung.com>
MIME-Version: 1.0
Organization: Samsung R&D Institute Poland
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20200821161401.11307-1-l.stelmach@samsung.com>
        <20201001152148.29747-1-l.stelmach@samsung.com>
        <CGME20201001152248eucas1p10219600aaa0df6e030d2493b2aefbe92@eucas1p1.samsung.com>
Precedence: bulk

Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_* to match documentation.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/spi/spi-s3c64xx.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 5be6f2484e86..adc5593ca2ca 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -29,7 +29,7 @@
 #define S3C64XX_SPI_CH_CFG		0x00
 #define S3C64XX_SPI_CLK_CFG		0x04
 #define S3C64XX_SPI_MODE_CFG		0x08
-#define S3C64XX_SPI_SLAVE_SEL		0x0C
+#define S3C64XX_SPI_CS_REG		0x0C
 #define S3C64XX_SPI_INT_EN		0x10
 #define S3C64XX_SPI_STATUS		0x14
 #define S3C64XX_SPI_TX_DATA		0x18
@@ -64,9 +64,9 @@
 #define S3C64XX_SPI_MODE_TXDMA_ON		(1<<1)
 #define S3C64XX_SPI_MODE_4BURST			(1<<0)
 
-#define S3C64XX_SPI_SLAVE_AUTO			(1<<1)
-#define S3C64XX_SPI_SLAVE_SIG_INACT		(1<<0)
-#define S3C64XX_SPI_SLAVE_NSC_CNT_2		(2<<4)
+#define S3C64XX_SPI_CS_NSC_CNT_2		(2<<4)
+#define S3C64XX_SPI_CS_AUTO			(1<<1)
+#define S3C64XX_SPI_CS_SIG_INACT		(1<<0)
 
 #define S3C64XX_SPI_INT_TRAILING_EN		(1<<6)
 #define S3C64XX_SPI_INT_RX_OVERRUN_EN		(1<<5)
@@ -332,18 +332,18 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
 
 	if (enable) {
 		if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) {
-			writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+			writel(0, sdd->regs + S3C64XX_SPI_CS_REG);
 		} else {
-			u32 ssel = readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+			u32 ssel = readl(sdd->regs + S3C64XX_SPI_CS_REG);
 
-			ssel |= (S3C64XX_SPI_SLAVE_AUTO |
-						S3C64XX_SPI_SLAVE_NSC_CNT_2);
-			writel(ssel, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+			ssel |= (S3C64XX_SPI_CS_AUTO |
+						S3C64XX_SPI_CS_NSC_CNT_2);
+			writel(ssel, sdd->regs + S3C64XX_SPI_CS_REG);
 		}
 	} else {
 		if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
-			writel(S3C64XX_SPI_SLAVE_SIG_INACT,
-			       sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+			writel(S3C64XX_SPI_CS_SIG_INACT,
+			       sdd->regs + S3C64XX_SPI_CS_REG);
 	}
 }
 
@@ -982,9 +982,9 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd)
 	sdd->cur_speed = 0;
 
 	if (sci->no_cs)
-		writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+		writel(0, sdd->regs + S3C64XX_SPI_CS_REG);
 	else if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
-		writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+		writel(S3C64XX_SPI_CS_SIG_INACT, sdd->regs + S3C64XX_SPI_CS_REG);
 
 	/* Disable Interrupts - we use Polling if not DMA mode */
 	writel(0, regs + S3C64XX_SPI_INT_EN);
-- 
2.26.2