Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Kevin Hilman <khilman@baylibre.com>
To:     Neil Armstrong <narmstrong@baylibre.com>, kishon@ti.com,
        balbi@kernel.org, martin.blumenstingl@googlemail.com
Cc:     linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-usb@vger.kernel.org
Subject: Re: [PATCH v2 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board
In-Reply-To: <30e2c174-c94b-f42a-1dd4-ae05c317d618@baylibre.com>
References: <20200917065949.3476-1-narmstrong@baylibre.com> <30e2c174-c94b-f42a-1dd4-ae05c317d618@baylibre.com>
Date:   Fri, 02 Oct 2020 11:23:46 -0700
Message-ID: <7hpn60mqq5.fsf@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Neil Armstrong <narmstrong@baylibre.com> writes:

> Hi Kevin,
>
> On 17/09/2020 08:59, Neil Armstrong wrote:
>> The Amlogic AXG is close to the GXL Glue but with a single OTG PHY.
>> 
>> It needs the same init sequence as GXL & GXM, but it seems it doesn't need
>> the host disconnect bit.
>> 
>> The Glue driver reuses the already implemented GXL & GXM work.
>> 
>> The USB2 PHY driver needs a slight tweak to keep the OTG detection working.
>> 
>> Changes since v1 at [1]:
>> - s/close from/close to/g
>> - collected review tags
>> - added small comment about phy management in patch 3
>> - removed status = "okay" in patch 4
>> - removed invalid phy-supply of phy1 in patch 5
>> 
>> [1] http://lore.kernel.org/r/20200909160409.8678-1-narmstrong@baylibre.com
>> 
>> Neil Armstrong (5):
>>   phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
>>   dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG
>>     Families USB Glue Bindings
>>   usb: dwc-meson-g12a: Add support for USB on AXG SoCs
>>   arm64: dts: meson-axg: add USB nodes
>>   arm64: dts: meson-axg-s400: enable USB OTG
>
> Can you pick the DT patches ?

Yes, queued up.

Since we're already at -rc7, this may not make it until v5.11.

Kevin