Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964831AbWHHN2i (ORCPT ); Tue, 8 Aug 2006 09:28:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932587AbWHHN2i (ORCPT ); Tue, 8 Aug 2006 09:28:38 -0400 Received: from rtsoft3.corbina.net ([85.21.88.6]:38689 "EHLO buildserver.ru.mvista.com") by vger.kernel.org with ESMTP id S932584AbWHHN2f (ORCPT ); Tue, 8 Aug 2006 09:28:35 -0400 Date: Tue, 8 Aug 2006 17:28:01 +0400 From: Vitaly Bordug To: Jeff Garzik , linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Subject: [PATCH 3/3] ppc32: board-specific part of fs_enet update Message-ID: <20060808172801.0a568332@localhost.localdomain> In-Reply-To: <20060807232731.13885.80067.stgit@localhost.localdomain> References: <20060807232731.13885.80067.stgit@localhost.localdomain> X-Mailer: Sylpheed-Claws 2.3.1cvs86 (GTK+ 2.8.20; i686-redhat-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 42085 Lines: 1488 Jeff, This is the same as previous, but with a number of indentation issues addressed in arch/ppc/platforms/mpc*. I think it makes sense to do it right now, since all the files are touched anyway. Haven't noticed before, sorry about that. Please find the patch inlined below. This contains board-specific portion to respect driver changes (for 8272ads , 885ads and 866ads). Altered platform_data structures as well as initial setup routines relevant to fs_enet. Signed-off-by: Vitaly Bordug --- arch/ppc/platforms/85xx/mpc8560_ads.c | 89 ++++++++++++ arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 19 +++ arch/ppc/platforms/mpc8272ads_setup.c | 154 ++++++++++++--------- arch/ppc/platforms/mpc866ads_setup.c | 192 +++++++++++++------------- arch/ppc/platforms/mpc885ads_setup.c | 175 +++++++++--------------- arch/ppc/platforms/pq2ads_pd.h | 82 ----------- arch/ppc/syslib/mpc85xx_devices.c | 89 ++++++++++++ arch/ppc/syslib/mpc8xx_devices.c | 8 + arch/ppc/syslib/mpc8xx_sys.c | 6 + arch/ppc/syslib/pq2_devices.c | 5 + arch/ppc/syslib/pq2_sys.c | 3 include/asm-ppc/cpm2.h | 95 +++++++++++++ include/asm-ppc/mpc8260.h | 1 include/asm-ppc/mpc8xx.h | 1 include/linux/fs_enet_pd.h | 50 +++---- 15 files changed, 578 insertions(+), 391 deletions(-) diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index d90cd24..94badaf 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -29,6 +29,7 @@ #include #include #include #include +#include #include #include @@ -58,6 +59,71 @@ #include * Setup the architecture * */ +static void init_fcc_ioports(void) +{ + struct immap *immap; + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + /* FCC2/3 are on the ports B/C. */ + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (CLK_TRX); + out_be32(&io->iop_pparc, tempval); + + /* Configure Serial Interface clock routing. + * First, clear all FCC bits to zero, + * then set the ones we want. + */ + immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); + immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; +} static void __init mpc8560ads_setup_arch(void) @@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void) unsigned int freq; struct gianfar_platform_data *pdata; struct gianfar_mdio_data *mdata; + struct fs_platform_info *fpi; cpm2_reset(); @@ -110,6 +177,28 @@ #endif memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } + init_fcc_ioports(); + ppc_sys_device_remove(MPC85xx_CPM_FCC1); + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->bus_id = "0:02"; + fpi->phy_addr = 2; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1]; + } + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->macaddr[5] += 1; + fpi->bus_id = "0:03"; + fpi->phy_addr = 3; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2]; + } + #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index abf3228..c8c322f 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -45,4 +45,23 @@ #define MPC85XX_PCI1_MEM_OFFSET 0x000000 #define MPC85XX_PCI1_IO_SIZE 0x01000000 +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + + #endif /* __MACH_MPC85XX_ADS_H__ */ diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index abb7154..2a35fe2 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -56,64 +56,51 @@ static struct fs_uart_platform_info mpc8 }, }; -static struct fs_mii_bus_info mii_bus_info = { - .method = fsmii_bitbang, - .id = 0, - .i.bitbang = { - .mdio_port = fsiop_portc, - .mdio_bit = 18, - .mdc_port = fsiop_portc, - .mdc_bit = 19, - .delay = 1, - }, -}; - -static struct fs_platform_info mpc82xx_fcc1_pdata = { - .fs_no = fsid_fcc1, - .cp_page = CPM_CR_FCC1_PAGE, - .cp_block = CPM_CR_FCC1_SBLOCK, - .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), - .clk_route = CMX1_CLK_ROUTE, - .clk_mask = CMX1_CLK_MASK, - .init_ioports = init_fcc1_ioports, - - .phy_addr = 0, -#ifdef PHY_INTERRUPT - .phy_irq = PHY_INTERRUPT, -#else - .phy_irq = -1; -#endif - .mem_offset = FCC1_MEM_OFFSET, - .bus_info = &mii_bus_info, - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, +static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = { + .mdio_dat.bit = 18, + .mdio_dir.bit = 18, + .mdc_dat.bit = 19, + .delay = 1, }; -static struct fs_platform_info mpc82xx_fcc2_pdata = { - .fs_no = fsid_fcc2, - .cp_page = CPM_CR_FCC2_PAGE, - .cp_block = CPM_CR_FCC2_SBLOCK, - .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), - .clk_route = CMX2_CLK_ROUTE, - .clk_mask = CMX2_CLK_MASK, - .init_ioports = init_fcc2_ioports, - - .phy_addr = 3, -#ifdef PHY_INTERRUPT - .phy_irq = PHY_INTERRUPT, -#else - .phy_irq = -1; -#endif - .mem_offset = FCC2_MEM_OFFSET, - .bus_info = &mii_bus_info, - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, +static struct fs_platform_info mpc82xx_enet_pdata[] = { + [fsid_fcc1] = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + .clk_route = CMX1_CLK_ROUTE, + .clk_mask = CMX1_CLK_MASK, + .init_ioports = init_fcc1_ioports, + + .mem_offset = FCC1_MEM_OFFSET, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + .bus_id = "0:00", + }, + [fsid_fcc2] = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + .clk_route = CMX2_CLK_ROUTE, + .clk_mask = CMX2_CLK_MASK, + .init_ioports = init_fcc2_ioports, + + .mem_offset = FCC2_MEM_OFFSET, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + .bus_id = "0:03", + }, }; static void init_fcc1_ioports(void) @@ -209,20 +196,21 @@ static void __init mpc8272ads_fixup_enet bd_t* bi = (void*)__res; int fs_no = fsid_fcc1+pdev->id-1; - mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase; - mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c; - - switch(fs_no) { - case fsid_fcc1: - memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6); - pdev->dev.platform_data = &mpc82xx_fcc1_pdata; - break; - case fsid_fcc2: - memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6); - mpc82xx_fcc2_pdata.macaddr[5] ^= 1; - pdev->dev.platform_data = &mpc82xx_fcc2_pdata; - break; + if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) { + return; } + + mpc82xx_enet_pdata[fs_no].dpram_offset= + (u32)cpm2_immr->im_dprambase; + mpc82xx_enet_pdata[fs_no].fcc_regs_c = + (u32)cpm2_immr->im_fcc_c; + memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6); + + /* prevent dup mac */ + if(fs_no == fsid_fcc2) + mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1; + + pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no]; } static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, @@ -274,6 +262,29 @@ static void init_scc4_uart_ioports(void) iounmap(immap); } +static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev, + int idx) +{ + m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT; + m82xx_mii_bb_pdata.irq[1] = -1; + m82xx_mii_bb_pdata.irq[2] = -1; + m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT; + m82xx_mii_bb_pdata.irq[31] = -1; + + + m82xx_mii_bb_pdata.mdio_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + m82xx_mii_bb_pdata.mdio_dir.offset = + (u32)&cpm2_immr->im_ioport.iop_pdirc; + + m82xx_mii_bb_pdata.mdc_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + + pdev->dev.platform_data = &m82xx_mii_bb_pdata; +} + static int mpc8272ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { @@ -286,6 +297,10 @@ static int mpc8272ads_platform_notify(st .rtn = mpc8272ads_fixup_uart_pdata, }, { + .bus_id = "fsl-bb-mdio", + .rtn = mpc8272ads_fixup_mdio_pdata, + }, + { .bus_id = NULL } }; @@ -319,6 +334,7 @@ #ifdef CONFIG_SERIAL_CPM_SCC4 ppc_sys_device_enable(MPC82xx_CPM_SCC4); #endif + ppc_sys_device_enable(MPC82xx_MDIO_BB); return 0; } diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index f19b616..e12cece 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -1,10 +1,10 @@ -/*arch/ppc/platforms/mpc885ads-setup.c +/*arch/ppc/platforms/mpc866ads-setup.c * - * Platform setup for the Freescale mpc885ads board + * Platform setup for the Freescale mpc866ads board * * Vitaly Bordug * - * Copyright 2005 MontaVista Software Inc. + * Copyright 2005-2006 MontaVista Software Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -42,49 +42,36 @@ static void setup_scc1_ioports(void); static void setup_smc1_ioports(void); static void setup_smc2_ioports(void); -static struct fs_mii_bus_info fec_mii_bus_info = { - .method = fsmii_fec, - .id = 0, -}; - -static struct fs_mii_bus_info scc_mii_bus_info = { - .method = fsmii_fixed, - .id = 0, - .i.fixed.speed = 10, - .i.fixed.duplex = 0, -}; +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; -static struct fs_platform_info mpc8xx_fec_pdata[] = { - { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; - .use_napi = 1, - .napi_weight = 17, +static struct fs_platform_info mpc8xx_enet_pdata[] = { + [fsid_fec1] = { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, - .phy_addr = 15, - .phy_irq = -1, + .use_napi = 1, + .napi_weight = 17, - .use_rmii = 0, + .init_ioports = setup_fec1_ioports, - .bus_info = &fec_mii_bus_info, - } -}; + .bus_id = "0:0f", + .has_phy = 1, + }, + [fsid_scc1] = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + .use_napi = 1, + .napi_weight = 17, -static struct fs_platform_info mpc8xx_scc_pdata = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, - - .phy_addr = -1, - .phy_irq = -1, - - .bus_info = &scc_mii_bus_info, + .init_ioports = setup_scc1_ioports, + .bus_id = "fixed@100:1", + }, }; static struct fs_uart_platform_info mpc866_uart_pdata[] = { @@ -207,63 +194,6 @@ static void setup_scc1_ioports(void) } -static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) -{ - struct fs_platform_info *fpi = pdev->dev.platform_data; - - volatile cpm8xx_t *cp; - bd_t *bd = (bd_t *) __res; - char *e; - int i; - - /* Get pointer to Communication Processor */ - cp = cpmp; - switch (fs_no) { - case fsid_fec1: - fpi = &mpc8xx_fec_pdata[0]; - fpi->init_ioports = &setup_fec1_ioports; - - break; - case fsid_scc1: - fpi = &mpc8xx_scc_pdata; - fpi->init_ioports = &setup_scc1_ioports; - - break; - default: - printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); - return; - } - - pdev->dev.platform_data = fpi; - fpi->fs_no = fs_no; - - e = (unsigned char *)&bd->bi_enetaddr; - for (i = 0; i < 6; i++) - fpi->macaddr[i] = *e++; - - fpi->macaddr[5 - pdev->id]++; - -} - -static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for FEC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) - return; - mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); -} - -static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for SCC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) - return; - - mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); -} - static void setup_smc1_ioports(void) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -315,6 +245,56 @@ #endif } +static int ma_count = 0; + +static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + + if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); + return; + } + + + fpi = &mpc8xx_enet_pdata[fs_no]; + fpi->fs_no = fs_no; + pdev->dev.platform_data = fpi; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5] += ma_count++; +} + +static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, int idx) { @@ -359,6 +339,9 @@ static int mpc866ads_platform_notify(str int __init mpc866ads_init(void) { + bd_t *bd = (bd_t *) __res; + struct fs_mii_fec_platform_info* fmpi; + printk(KERN_NOTICE "mpc866ads: Init\n"); platform_notify = mpc866ads_platform_notify; @@ -366,11 +349,20 @@ int __init mpc866ads_init(void) ppc_sys_device_initfunc(); ppc_sys_device_disable_all(); -#ifdef MPC8xx_SECOND_ETH_SCC1 +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1 ppc_sys_device_enable(MPC8xx_CPM_SCC1); #endif ppc_sys_device_enable(MPC8xx_CPM_FEC1); + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + /* No PHY interrupt line here */ + fmpi->irq[0xf] = -1; + /* Since either of the uarts could be used as console, they need to ready */ #ifdef CONFIG_SERIAL_CPM_SMC1 ppc_sys_device_enable(MPC8xx_CPM_SMC1); @@ -381,6 +373,14 @@ #ifdef CONFIG_SERIAL_CPM_SMC ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + /* No PHY interrupt line here */ + fmpi->irq[0xf] = -1; return 0; } diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index c1fc4a1..5dfa4e6 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -38,7 +38,10 @@ extern unsigned char __res[]; static void setup_smc1_ioports(void); static void setup_smc2_ioports(void); -static void __init mpc885ads_scc_phy_init(char); +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; +static void setup_fec1_ioports(void); +static void setup_fec2_ioports(void); +static void setup_scc3_ioports(void); static struct fs_uart_platform_info mpc885_uart_pdata[] = { [fsid_smc1_uart] = { @@ -61,23 +64,8 @@ static struct fs_uart_platform_info mpc8 }, }; -static struct fs_mii_bus_info fec_mii_bus_info = { - .method = fsmii_fec, - .id = 0, -}; - -static struct fs_mii_bus_info scc_mii_bus_info = { -#ifdef CONFIG_SCC_ENET_8xx_FIXED - .method = fsmii_fixed, -#else - .method = fsmii_fec, -#endif - - .id = 0, -}; - -static struct fs_platform_info mpc8xx_fec_pdata[] = { - { +static struct fs_platform_info mpc8xx_enet_pdata[] = { + [fsid_fec1] = { .rx_ring = 128, .tx_ring = 16, .rx_copybreak = 240, @@ -85,11 +73,12 @@ static struct fs_platform_info mpc8xx_fe .use_napi = 1, .napi_weight = 17, - .phy_addr = 0, - .phy_irq = SIU_IRQ7, + .init_ioports = setup_fec1_ioports, - .bus_info = &fec_mii_bus_info, - }, { + .bus_id = "0:00", + .has_phy = 1, + }, + [fsid_fec2] = { .rx_ring = 128, .tx_ring = 16, .rx_copybreak = 240, @@ -97,35 +86,32 @@ static struct fs_platform_info mpc8xx_fe .use_napi = 1, .napi_weight = 17, - .phy_addr = 1, - .phy_irq = SIU_IRQ7, - - .bus_info = &fec_mii_bus_info, - } -}; + .init_ioports = setup_fec2_ioports, -static struct fs_platform_info mpc8xx_scc_pdata = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, + .bus_id = "0:01", + .has_phy = 1, + }, + [fsid_scc3] = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, + .use_napi = 1, + .napi_weight = 17, - .phy_addr = 2, -#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED - .phy_irq = -1, + .init_ioports = setup_scc3_ioports, +#ifdef CONFIG_FIXED_MII_10_FDX + .bus_id = "fixed@100:1", #else - .phy_irq = SIU_IRQ7, -#endif - - .bus_info = &scc_mii_bus_info, + .bus_id = "0:02", + #endif + }, }; void __init board_init(void) { - volatile cpm8xx_t *cp = cpmp; - unsigned int *bcsr_io; + cpm8xx_t *cp = cpmp; + unsigned int *bcsr_io; #ifdef CONFIG_FS_ENET immap_t *immap = (immap_t *) IMAP_ADDR; @@ -164,6 +150,14 @@ #ifdef CONFIG_FS_ENET /* use MDC for MII (common) */ setbits16(&immap->im_ioport.iop_pdpar, 0x0080); clrbits16(&immap->im_ioport.iop_pddir, 0x0080); + bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); + clrbits32(bcsr_io,BCSR5_MII1_EN); + clrbits32(bcsr_io,BCSR5_MII1_RST); +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + clrbits32(bcsr_io,BCSR5_MII2_EN); + clrbits32(bcsr_io,BCSR5_MII2_RST); +#endif + iounmap(bcsr_io); #endif } @@ -194,8 +188,8 @@ static void setup_fec2_ioports(void) /* configure FEC2 pins */ setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); - setbits32(&immap->im_cpm.cp_peso, 0x00037800); clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); + setbits32(&immap->im_cpm.cp_peso, 0x00037800); clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); } @@ -213,6 +207,8 @@ static void setup_scc3_ioports(void) /* Enable the PHY. */ + clrbits32(bcsr_io+4, BCSR4_ETH10_RST); + udelay(1000); setbits32(bcsr_io+4, BCSR4_ETH10_RST); /* Configure port A pins for Txd and Rxd. */ @@ -254,37 +250,38 @@ static void setup_scc3_ioports(void) clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - setbits32(bcsr_io+1, BCSR1_ETHEN); + setbits32(bcsr_io+4, BCSR1_ETHEN); iounmap(bcsr_io); } +static int mac_count = 0; + static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) { - struct fs_platform_info *fpi = pdev->dev.platform_data; - - volatile cpm8xx_t *cp; + struct fs_platform_info *fpi; bd_t *bd = (bd_t *) __res; char *e; int i; - /* Get pointer to Communication Processor */ - cp = cpmp; + if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); + return; + } + + fpi = &mpc8xx_enet_pdata[fs_no]; + switch (fs_no) { case fsid_fec1: - fpi = &mpc8xx_fec_pdata[0]; fpi->init_ioports = &setup_fec1_ioports; break; case fsid_fec2: - fpi = &mpc8xx_fec_pdata[1]; fpi->init_ioports = &setup_fec2_ioports; break; case fsid_scc3: - fpi = &mpc8xx_scc_pdata; fpi->init_ioports = &setup_scc3_ioports; - mpc885ads_scc_phy_init(fpi->phy_addr); break; default: - printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + printk(KERN_WARNING "Device %s is not supported!\n", pdev->name); return; } @@ -295,7 +292,7 @@ static void mpc885ads_fixup_enet_pdata(s for (i = 0; i < 6; i++) fpi->macaddr[i] = *e++; - fpi->macaddr[5 - pdev->id]++; + fpi->macaddr[5] += mac_count++; } @@ -318,58 +315,6 @@ static void __init mpc885ads_fixup_scc_e mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } -/* SCC ethernet controller does not have MII management channel. FEC1 MII - * channel is used to communicate with the 10Mbit PHY. - */ - -#define MII_ECNTRL_PINMUX 0x4 -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_RCNTRL_MII_MODE 0x00000004 - -/* Make MII read/write commands. - */ -#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \ - ((VAL) & 0xffff) | ((PHY_ADDR) << 23)) - -static void mpc885ads_scc_phy_init(char phy_addr) -{ - volatile immap_t *immap; - volatile fec_t *fecp; - bd_t *bd; - - bd = (bd_t *) __res; - immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */ - fecp = &(immap->im_cpm.cp_fec); - - /* Enable MII pins of the FEC1 - */ - setbits16(&immap->im_ioport.iop_pdpar, 0x0080); - clrbits16(&immap->im_ioport.iop_pddir, 0x0080); - /* Set MII speed to 2.5 MHz - */ - out_be32(&fecp->fec_mii_speed, - ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1); - - /* Enable FEC pin MUX - */ - setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); - setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); - - out_be32(&fecp->fec_mii_data, - mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr)); - udelay(100); - out_be32(&fecp->fec_mii_data, - mk_mii_write(MII_ADVERTISE, - ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr)); - udelay(100); - - /* Disable FEC MII settings - */ - clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); - clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); - out_be32(&fecp->fec_mii_speed, 0); -} - static void setup_smc1_ioports(void) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -462,6 +407,9 @@ static int mpc885ads_platform_notify(str int __init mpc885ads_init(void) { + struct fs_mii_fec_platform_info* fmpi; + bd_t *bd = (bd_t *) __res; + printk(KERN_NOTICE "mpc885ads: Init\n"); platform_notify = mpc885ads_platform_notify; @@ -471,8 +419,17 @@ int __init mpc885ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_FEC1); + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + + /* No PHY interrupt line here */ + fmpi->irq[0xf] = SIU_IRQ7; + #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 - ppc_sys_device_enable(MPC8xx_CPM_SCC1); + ppc_sys_device_enable(MPC8xx_CPM_SCC3); #endif #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h index 8f14a43..672483d 100644 --- a/arch/ppc/platforms/pq2ads_pd.h +++ b/arch/ppc/platforms/pq2ads_pd.h @@ -29,86 +29,4 @@ #define F2_TXCLK 16 #define F3_RXCLK 13 #define F3_TXCLK 14 -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) - -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) - #endif diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 7735336..325136e 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -16,9 +16,11 @@ #include #include #include #include +#include #include #include #include +#include /* We use offsets for IORESOURCE_MEM since we do not know at compile time * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup @@ -82,6 +84,60 @@ static struct fsl_i2c_platform_data mpc8 .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, }; +static struct fs_platform_info mpc85xx_fcc1_pdata = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX1_CLK_MASK, + .clk_route = CMX1_CLK_ROUTE, + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + + .mem_offset = FCC1_MEM_OFFSET, +}; + +static struct fs_platform_info mpc85xx_fcc2_pdata = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX2_CLK_MASK, + .clk_route = CMX2_CLK_ROUTE, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + + .mem_offset = FCC2_MEM_OFFSET, +}; + +static struct fs_platform_info mpc85xx_fcc3_pdata = { + .fs_no = fsid_fcc3, + .cp_page = CPM_CR_FCC3_PAGE, + .cp_block = CPM_CR_FCC3_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX3_CLK_MASK, + .clk_route = CMX3_CLK_ROUTE, + .clk_trx = (PC_F3RXCLK | PC_F3TXCLK), + + .mem_offset = FCC3_MEM_OFFSET, +}; + static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = 0x4500, @@ -318,19 +374,28 @@ struct platform_device ppc_sys_platform_ [MPC85xx_CPM_FCC1] = { .name = "fsl-cpm-fcc", .id = 1, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc1_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91300, .end = 0x9131F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x91380, .end = 0x9139F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_pram", + .start = 0x88400, + .end = 0x884ff, + .flags = IORESOURCE_MEM, + }, + { .start = SIU_INT_FCC1, .end = SIU_INT_FCC1, .flags = IORESOURCE_IRQ, @@ -340,19 +405,28 @@ struct platform_device ppc_sys_platform_ [MPC85xx_CPM_FCC2] = { .name = "fsl-cpm-fcc", .id = 2, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc2_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91320, .end = 0x9133F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x913A0, .end = 0x913CF, .flags = IORESOURCE_MEM, }, { + .name = "fcc_pram", + .start = 0x88500, + .end = 0x885ff, + .flags = IORESOURCE_MEM, + }, + { .start = SIU_INT_FCC2, .end = SIU_INT_FCC2, .flags = IORESOURCE_IRQ, @@ -362,19 +436,28 @@ struct platform_device ppc_sys_platform_ [MPC85xx_CPM_FCC3] = { .name = "fsl-cpm-fcc", .id = 3, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc3_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91340, .end = 0x9135F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x913D0, .end = 0x913FF, .flags = IORESOURCE_MEM, }, { + .name = "fcc_pram", + .start = 0x88600, + .end = 0x886ff, + .flags = IORESOURCE_MEM, + }, + { .start = SIU_INT_FCC3, .end = SIU_INT_FCC3, .flags = IORESOURCE_IRQ, diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 6f53638..cf5ab47 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -218,6 +218,14 @@ struct platform_device ppc_sys_platform_ }, }, }, + + [MPC8xx_MDIO_FEC] = { + .name = "fsl-cpm-fec-mdio", + .id = 0, + .num_resources = 0, + + }, + }; static int __init mach_mpc8xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index eee2132..18ba1d7 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -22,7 +22,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "MPC86X", .mask = 0xFFFFFFFF, .value = 0x00000000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC8xx_CPM_FEC1, @@ -32,13 +32,14 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC8xx_CPM_SCC4, MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, + MPC8xx_MDIO_FEC, }, }, { .ppc_sys_name = "MPC885", .mask = 0xFFFFFFFF, .value = 0x00000000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC8xx_CPM_FEC1, @@ -49,6 +50,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC8xx_CPM_SCC4, MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, + MPC8xx_MDIO_FEC, }, }, { /* default match */ diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index 8692d00..fefbc21 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -369,6 +369,11 @@ struct platform_device ppc_sys_platform_ }, }, }, + [MPC82xx_MDIO_BB] = { + .name = "fsl-bb-mdio", + .id = 0, + .num_resources = 0, + }, }; static int __init mach_mpc82xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index fee8948..f52600c 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -139,13 +139,14 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8272", .mask = 0x0000ff00, .value = 0x00000c00, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_MDIO_BB, }, }, /* below is a list of the 8280 family of processors */ diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index c70344b..f6a7ff0 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1093,5 +1093,100 @@ #endif #define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2) + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h index 4b93481..23579d4 100644 --- a/include/asm-ppc/mpc8260.h +++ b/include/asm-ppc/mpc8260.h @@ -82,6 +82,7 @@ enum ppc_sys_devices { MPC82xx_CPM_SMC2, MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_MDIO_BB, NUM_PPC_SYS_DEVS, }; diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h index adcce33..d3a2f2f 100644 --- a/include/asm-ppc/mpc8xx.h +++ b/include/asm-ppc/mpc8xx.h @@ -110,6 +110,7 @@ enum ppc_sys_devices { MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, MPC8xx_CPM_USB, + MPC8xx_MDIO_FEC, NUM_PPC_SYS_DEVS, }; diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 783c476..74ed35a 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -69,34 +69,21 @@ enum fs_ioport { fsiop_porte, }; -struct fs_mii_bus_info { - int method; /* mii method */ - int id; /* the id of the mii_bus */ - int disable_aneg; /* if the controller needs to negothiate speed & duplex */ - int lpa; /* the default board-specific vallues will be applied otherwise */ - - union { - struct { - int duplex; - int speed; - } fixed; - - struct { - /* nothing */ - } fec; - - struct { - /* nothing */ - } scc; - - struct { - int mdio_port; /* port & bit for MDIO */ - int mdio_bit; - int mdc_port; /* port & bit for MDC */ - int mdc_bit; - int delay; /* delay in us */ - } bitbang; - } i; +struct fs_mii_bit { + u32 offset; + u8 bit; + u8 polarity; +}; +struct fs_mii_bb_platform_info { + struct fs_mii_bit mdio_dir; + struct fs_mii_bit mdio_dat; + struct fs_mii_bit mdc_dat; + int mdio_port; /* port & bit for MDIO */ + int mdio_bit; + int mdc_port; /* port & bit for MDC */ + int mdc_bit; + int delay; /* delay in us */ + int irq[32]; /* irqs per phy's */ }; struct fs_platform_info { @@ -119,6 +106,7 @@ struct fs_platform_info { u32 device_flags; int phy_addr; /* the phy address (-1 no phy) */ + const char* bus_id; int phy_irq; /* the phy irq (if it exists) */ const struct fs_mii_bus_info *bus_info; @@ -130,6 +118,10 @@ struct fs_platform_info { int napi_weight; /* NAPI weight */ int use_rmii; /* use RMII mode */ + int has_phy; /* if the network is phy container as well...*/ +}; +struct fs_mii_fec_platform_info { + u32 irq[32]; + u32 mii_speed; }; - #endif - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/