Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030190AbWHHVLF (ORCPT ); Tue, 8 Aug 2006 17:11:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030212AbWHHVLE (ORCPT ); Tue, 8 Aug 2006 17:11:04 -0400 Received: from pentafluge.infradead.org ([213.146.154.40]:45002 "EHLO pentafluge.infradead.org") by vger.kernel.org with ESMTP id S1030207AbWHHVK7 (ORCPT ); Tue, 8 Aug 2006 17:10:59 -0400 From: mchehab@infradead.org To: linux-kernel@vger.kernel.org Cc: linux-dvb-maintainer@linuxtv.org, Mauro Carvalho Chehab Subject: [PATCH 06/14] V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one! Date: Tue, 08 Aug 2006 18:06:53 -0300 Message-id: <20060808210653.PS54020800006@infradead.org> In-Reply-To: <20060808210151.PS78629800000@infradead.org> References: <20060808210151.PS78629800000@infradead.org> Mime-Version: 1.0 X-Mailer: Evolution 2.7.2.1-4mdv2007.0 Content-Transfer-Encoding: 7bit X-Bad-Reply: References and In-Reply-To but no 'Re:' in Subject. X-SRS-Rewrite: SMTP reverse-path rewritten from by pentafluge.infradead.org See http://www.infradead.org/rpr.html Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28426 Lines: 959 From: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 12 + drivers/media/radio/Makefile | 1 drivers/media/radio/dsbr100.c | 430 +++++++++++++++++++++++++++++++++++++++++ drivers/media/video/Kconfig | 12 - drivers/media/video/Makefile | 1 drivers/media/video/dsbr100.c | 430 ----------------------------------------- 6 files changed, 442 insertions(+), 444 deletions(-) diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index de3128a..220076b 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -350,5 +350,15 @@ config RADIO_ZOLTRIX_PORT help Enter the I/O port of your Zoltrix radio card. -endmenu +config USB_DSBR + tristate "D-Link USB FM radio support (EXPERIMENTAL)" + depends on USB && VIDEO_V4L1 && EXPERIMENTAL + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + To compile this driver as a module, choose M here: the + module will be called dsbr100. +endmenu diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index e95b680..cf55a18 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -20,5 +20,6 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemt obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o +obj-$(CONFIG_USB_DSBR) += dsbr100.o EXTRA_CFLAGS += -Isound diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c new file mode 100644 index 0000000..f7e33f9 --- /dev/null +++ b/drivers/media/radio/dsbr100.c @@ -0,0 +1,430 @@ +/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs + into both the USB and an analog audio input, so this thing + only deals with initialisation and frequency setting, the + audio data has to be handled by a sound driver. + + Major issue: I can't find out where the device reports the signal + strength, and indeed the windows software appearantly just looks + at the stereo indicator as well. So, scanning will only find + stereo stations. Sad, but I can't help it. + + Also, the windows program sends oodles of messages over to the + device, and I couldn't figure out their meaning. My suspicion + is that they don't have any:-) + + You might find some interesting stuff about this module at + http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr + + Copyright (c) 2000 Markus Demleitner + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + History: + + Version 0.40: + Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing + + Version 0.30: + Markus: Updates for 2.5.x kernel and more ISO compliant source + + Version 0.25: + PSL and Markus: Cleanup, radio now doesn't stop on device close + + Version 0.24: + Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally + right. Some minor cleanup, improved standalone compilation + + Version 0.23: + Markus: Sign extension bug fixed by declaring transfer_buffer unsigned + + Version 0.22: + Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, + thanks to Mike Cox for pointing the problem out. + + Version 0.21: + Markus: Minor cleanup, warnings if something goes wrong, lame attempt + to adhere to Documentation/CodingStyle + + Version 0.2: + Brad Hards : Fixes to make it work as non-module + Markus: Copyright clarification + + Version 0.01: Markus: initial release + +*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.40" +#define DRIVER_AUTHOR "Markus Demleitner " +#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" + +#define DSB100_VENDOR 0x04b4 +#define DSB100_PRODUCT 0x1002 + +/* Commands the device appears to understand */ +#define DSB100_TUNE 1 +#define DSB100_ONOFF 2 + +#define TB_LEN 16 + +/* Frequency limits in MHz -- these are European values. For Japanese +devices, that would be 76 and 91. */ +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + + +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void usb_dsbr100_disconnect(struct usb_interface *intf); +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static int usb_dsbr100_open(struct inode *inode, struct file *file); +static int usb_dsbr100_close(struct inode *inode, struct file *file); + +static int radio_nr = -1; +module_param(radio_nr, int, 0); + +/* Data for one (physical) device */ +typedef struct { + struct usb_device *usbdev; + struct video_device *videodev; + unsigned char transfer_buffer[TB_LEN]; + int curfreq; + int stereo; + int users; + int removed; +} dsbr100_device; + + +/* File system interface */ +static struct file_operations usb_dsbr100_fops = { + .owner = THIS_MODULE, + .open = usb_dsbr100_open, + .release = usb_dsbr100_close, + .ioctl = usb_dsbr100_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +/* V4L interface */ +static struct video_device dsbr100_videodev_template= +{ + .owner = THIS_MODULE, + .name = "D-Link DSB-R 100", + .type = VID_TYPE_TUNER, + .hardware = VID_HARDWARE_AZTECH, + .fops = &usb_dsbr100_fops, + .release = video_device_release, +}; + +static struct usb_device_id usb_dsbr100_device_table [] = { + { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_dsbr100_driver = { + .name = "dsbr100", + .probe = usb_dsbr100_probe, + .disconnect = usb_dsbr100_disconnect, + .id_table = usb_dsbr100_device_table, +}; + +/* Low-level device interface begins here */ + +/* switch on radio */ +static int dsbr100_start(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + + +/* switch off radio */ +static int dsbr100_stop(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int dsbr100_setfreq(dsbr100_device *radio, int freq) +{ + freq = (freq/16*80)/1000+856; + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_TUNE, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + (freq>>8)&0x00ff, freq&0xff, + radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { + radio->stereo = -1; + return -1; + } + radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); + return (radio->transfer_buffer)[0]; +} + +/* return the device status. This is, in effect, just whether it +sees a stereo signal or not. Pity. */ +static void dsbr100_getstat(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) + radio->stereo = -1; + else + radio->stereo = ! (radio->transfer_buffer[0]&0x01); +} + + +/* USB subsystem interface begins here */ + +/* check if the device is present and register with v4l and +usb if it is */ +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + dsbr100_device *radio; + + if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) + return -ENOMEM; + if (!(radio->videodev = video_device_alloc())) { + kfree(radio); + return -ENOMEM; + } + memcpy(radio->videodev, &dsbr100_videodev_template, + sizeof(dsbr100_videodev_template)); + radio->removed = 0; + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + radio->curfreq = FREQ_MIN*FREQ_MUL; + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, + radio_nr)) { + warn("Could not register video device"); + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + usb_set_intfdata(intf, radio); + return 0; +} + +/* handle unplugging of the device, release data structures +if nothing keeps us from doing it. If something is still +keeping us busy, the release callback of v4l will take care +of releasing it. stv680.c does not relase its private +data, so I don't do this here either. Checking out the +code I'd expect I better did that, but if there's a memory +leak here it's tiny (~50 bytes per disconnect) */ +static void usb_dsbr100_disconnect(struct usb_interface *intf) +{ + dsbr100_device *radio = usb_get_intfdata(intf); + + usb_set_intfdata (intf, NULL); + if (radio) { + video_unregister_device(radio->videodev); + radio->videodev = NULL; + if (radio->users) { + kfree(radio); + } else { + radio->removed = 1; + } + } +} + + +/* Video for Linux interface */ + +static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -EIO; + + switch(cmd) { + case VIDIOCGCAP: { + struct video_capability *v = arg; + + memset(v, 0, sizeof(*v)); + v->type = VID_TYPE_TUNER; + v->channels = 1; + v->audios = 1; + strcpy(v->name, "D-Link R-100 USB FM Radio"); + return 0; + } + case VIDIOCGTUNER: { + struct video_tuner *v = arg; + + dsbr100_getstat(radio); + if(v->tuner) /* Only 1 tuner */ + return -EINVAL; + v->rangelow = FREQ_MIN*FREQ_MUL; + v->rangehigh = FREQ_MAX*FREQ_MUL; + v->flags = VIDEO_TUNER_LOW; + v->mode = VIDEO_MODE_AUTO; + v->signal = radio->stereo*0x7000; + /* Don't know how to get signal strength */ + v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; + strcpy(v->name, "DSB R-100"); + return 0; + } + case VIDIOCSTUNER: { + struct video_tuner *v = arg; + + if(v->tuner!=0) + return -EINVAL; + /* Only 1 tuner so no setting needed ! */ + return 0; + } + case VIDIOCGFREQ: { + int *freq = arg; + + if (radio->curfreq==-1) + return -EINVAL; + *freq = radio->curfreq; + return 0; + } + case VIDIOCSFREQ: { + int *freq = arg; + + radio->curfreq = *freq; + if (dsbr100_setfreq(radio, radio->curfreq)==-1) + warn("Set frequency failed"); + return 0; + } + case VIDIOCGAUDIO: { + struct video_audio *v = arg; + + memset(v, 0, sizeof(*v)); + v->flags |= VIDEO_AUDIO_MUTABLE; + v->mode = VIDEO_SOUND_STEREO; + v->volume = 1; + v->step = 1; + strcpy(v->name, "Radio"); + return 0; + } + case VIDIOCSAUDIO: { + struct video_audio *v = arg; + + if (v->audio) + return -EINVAL; + if (v->flags&VIDEO_AUDIO_MUTE) { + if (dsbr100_stop(radio)==-1) + warn("Radio did not respond properly"); + } + else + if (dsbr100_start(radio)==-1) + warn("Radio did not respond properly"); + return 0; + } + default: + return -ENOIOCTLCMD; + } +} + +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); +} + +static int usb_dsbr100_open(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + radio->users = 1; + if (dsbr100_start(radio)<0) { + warn("Radio did not start up properly"); + radio->users = 0; + return -EIO; + } + dsbr100_setfreq(radio, radio->curfreq); + return 0; +} + +static int usb_dsbr100_close(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + radio->users = 0; + if (radio->removed) { + kfree(radio); + } + return 0; +} + +static int __init dsbr100_init(void) +{ + int retval = usb_register(&usb_dsbr100_driver); + info(DRIVER_VERSION ":" DRIVER_DESC); + return retval; +} + +static void __exit dsbr100_exit(void) +{ + usb_deregister(&usb_dsbr100_driver); +} + +module_init (dsbr100_init); +module_exit (dsbr100_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index fe56862..732bf1e 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kcon source "drivers/media/video/em28xx/Kconfig" -config USB_DSBR - tristate "D-Link USB FM radio support (EXPERIMENTAL)" - depends on USB && VIDEO_V4L1 && EXPERIMENTAL - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 353d61c..010833d 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_USB_DABUSB) += dabusb.o -obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o obj-$(CONFIG_USB_STV680) += stv680.o diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c deleted file mode 100644 index f7e33f9..0000000 --- a/drivers/media/video/dsbr100.c +++ /dev/null @@ -1,430 +0,0 @@ -/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs - into both the USB and an analog audio input, so this thing - only deals with initialisation and frequency setting, the - audio data has to be handled by a sound driver. - - Major issue: I can't find out where the device reports the signal - strength, and indeed the windows software appearantly just looks - at the stereo indicator as well. So, scanning will only find - stereo stations. Sad, but I can't help it. - - Also, the windows program sends oodles of messages over to the - device, and I couldn't figure out their meaning. My suspicion - is that they don't have any:-) - - You might find some interesting stuff about this module at - http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr - - Copyright (c) 2000 Markus Demleitner - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - History: - - Version 0.40: - Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing - - Version 0.30: - Markus: Updates for 2.5.x kernel and more ISO compliant source - - Version 0.25: - PSL and Markus: Cleanup, radio now doesn't stop on device close - - Version 0.24: - Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally - right. Some minor cleanup, improved standalone compilation - - Version 0.23: - Markus: Sign extension bug fixed by declaring transfer_buffer unsigned - - Version 0.22: - Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, - thanks to Mike Cox for pointing the problem out. - - Version 0.21: - Markus: Minor cleanup, warnings if something goes wrong, lame attempt - to adhere to Documentation/CodingStyle - - Version 0.2: - Brad Hards : Fixes to make it work as non-module - Markus: Copyright clarification - - Version 0.01: Markus: initial release - -*/ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.40" -#define DRIVER_AUTHOR "Markus Demleitner " -#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" - -#define DSB100_VENDOR 0x04b4 -#define DSB100_PRODUCT 0x1002 - -/* Commands the device appears to understand */ -#define DSB100_TUNE 1 -#define DSB100_ONOFF 2 - -#define TB_LEN 16 - -/* Frequency limits in MHz -- these are European values. For Japanese -devices, that would be 76 and 91. */ -#define FREQ_MIN 87.5 -#define FREQ_MAX 108.0 -#define FREQ_MUL 16000 - - -static int usb_dsbr100_probe(struct usb_interface *intf, - const struct usb_device_id *id); -static void usb_dsbr100_disconnect(struct usb_interface *intf); -static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static int usb_dsbr100_open(struct inode *inode, struct file *file); -static int usb_dsbr100_close(struct inode *inode, struct file *file); - -static int radio_nr = -1; -module_param(radio_nr, int, 0); - -/* Data for one (physical) device */ -typedef struct { - struct usb_device *usbdev; - struct video_device *videodev; - unsigned char transfer_buffer[TB_LEN]; - int curfreq; - int stereo; - int users; - int removed; -} dsbr100_device; - - -/* File system interface */ -static struct file_operations usb_dsbr100_fops = { - .owner = THIS_MODULE, - .open = usb_dsbr100_open, - .release = usb_dsbr100_close, - .ioctl = usb_dsbr100_ioctl, - .compat_ioctl = v4l_compat_ioctl32, - .llseek = no_llseek, -}; - -/* V4L interface */ -static struct video_device dsbr100_videodev_template= -{ - .owner = THIS_MODULE, - .name = "D-Link DSB-R 100", - .type = VID_TYPE_TUNER, - .hardware = VID_HARDWARE_AZTECH, - .fops = &usb_dsbr100_fops, - .release = video_device_release, -}; - -static struct usb_device_id usb_dsbr100_device_table [] = { - { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); - -/* USB subsystem interface */ -static struct usb_driver usb_dsbr100_driver = { - .name = "dsbr100", - .probe = usb_dsbr100_probe, - .disconnect = usb_dsbr100_disconnect, - .id_table = usb_dsbr100_device_table, -}; - -/* Low-level device interface begins here */ - -/* switch on radio */ -static int dsbr100_start(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_ONOFF, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) - return -1; - return (radio->transfer_buffer)[0]; -} - - -/* switch off radio */ -static int dsbr100_stop(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_ONOFF, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) - return -1; - return (radio->transfer_buffer)[0]; -} - -/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ -static int dsbr100_setfreq(dsbr100_device *radio, int freq) -{ - freq = (freq/16*80)/1000+856; - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_TUNE, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - (freq>>8)&0x00ff, freq&0xff, - radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { - radio->stereo = -1; - return -1; - } - radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); - return (radio->transfer_buffer)[0]; -} - -/* return the device status. This is, in effect, just whether it -sees a stereo signal or not. Pity. */ -static void dsbr100_getstat(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) - radio->stereo = -1; - else - radio->stereo = ! (radio->transfer_buffer[0]&0x01); -} - - -/* USB subsystem interface begins here */ - -/* check if the device is present and register with v4l and -usb if it is */ -static int usb_dsbr100_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - dsbr100_device *radio; - - if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) - return -ENOMEM; - if (!(radio->videodev = video_device_alloc())) { - kfree(radio); - return -ENOMEM; - } - memcpy(radio->videodev, &dsbr100_videodev_template, - sizeof(dsbr100_videodev_template)); - radio->removed = 0; - radio->users = 0; - radio->usbdev = interface_to_usbdev(intf); - radio->curfreq = FREQ_MIN*FREQ_MUL; - video_set_drvdata(radio->videodev, radio); - if (video_register_device(radio->videodev, VFL_TYPE_RADIO, - radio_nr)) { - warn("Could not register video device"); - video_device_release(radio->videodev); - kfree(radio); - return -EIO; - } - usb_set_intfdata(intf, radio); - return 0; -} - -/* handle unplugging of the device, release data structures -if nothing keeps us from doing it. If something is still -keeping us busy, the release callback of v4l will take care -of releasing it. stv680.c does not relase its private -data, so I don't do this here either. Checking out the -code I'd expect I better did that, but if there's a memory -leak here it's tiny (~50 bytes per disconnect) */ -static void usb_dsbr100_disconnect(struct usb_interface *intf) -{ - dsbr100_device *radio = usb_get_intfdata(intf); - - usb_set_intfdata (intf, NULL); - if (radio) { - video_unregister_device(radio->videodev); - radio->videodev = NULL; - if (radio->users) { - kfree(radio); - } else { - radio->removed = 1; - } - } -} - - -/* Video for Linux interface */ - -static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - if (!radio) - return -EIO; - - switch(cmd) { - case VIDIOCGCAP: { - struct video_capability *v = arg; - - memset(v, 0, sizeof(*v)); - v->type = VID_TYPE_TUNER; - v->channels = 1; - v->audios = 1; - strcpy(v->name, "D-Link R-100 USB FM Radio"); - return 0; - } - case VIDIOCGTUNER: { - struct video_tuner *v = arg; - - dsbr100_getstat(radio); - if(v->tuner) /* Only 1 tuner */ - return -EINVAL; - v->rangelow = FREQ_MIN*FREQ_MUL; - v->rangehigh = FREQ_MAX*FREQ_MUL; - v->flags = VIDEO_TUNER_LOW; - v->mode = VIDEO_MODE_AUTO; - v->signal = radio->stereo*0x7000; - /* Don't know how to get signal strength */ - v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; - strcpy(v->name, "DSB R-100"); - return 0; - } - case VIDIOCSTUNER: { - struct video_tuner *v = arg; - - if(v->tuner!=0) - return -EINVAL; - /* Only 1 tuner so no setting needed ! */ - return 0; - } - case VIDIOCGFREQ: { - int *freq = arg; - - if (radio->curfreq==-1) - return -EINVAL; - *freq = radio->curfreq; - return 0; - } - case VIDIOCSFREQ: { - int *freq = arg; - - radio->curfreq = *freq; - if (dsbr100_setfreq(radio, radio->curfreq)==-1) - warn("Set frequency failed"); - return 0; - } - case VIDIOCGAUDIO: { - struct video_audio *v = arg; - - memset(v, 0, sizeof(*v)); - v->flags |= VIDEO_AUDIO_MUTABLE; - v->mode = VIDEO_SOUND_STEREO; - v->volume = 1; - v->step = 1; - strcpy(v->name, "Radio"); - return 0; - } - case VIDIOCSAUDIO: { - struct video_audio *v = arg; - - if (v->audio) - return -EINVAL; - if (v->flags&VIDEO_AUDIO_MUTE) { - if (dsbr100_stop(radio)==-1) - warn("Radio did not respond properly"); - } - else - if (dsbr100_start(radio)==-1) - warn("Radio did not respond properly"); - return 0; - } - default: - return -ENOIOCTLCMD; - } -} - -static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); -} - -static int usb_dsbr100_open(struct inode *inode, struct file *file) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - radio->users = 1; - if (dsbr100_start(radio)<0) { - warn("Radio did not start up properly"); - radio->users = 0; - return -EIO; - } - dsbr100_setfreq(radio, radio->curfreq); - return 0; -} - -static int usb_dsbr100_close(struct inode *inode, struct file *file) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - if (!radio) - return -ENODEV; - radio->users = 0; - if (radio->removed) { - kfree(radio); - } - return 0; -} - -static int __init dsbr100_init(void) -{ - int retval = usb_register(&usb_dsbr100_driver); - info(DRIVER_VERSION ":" DRIVER_DESC); - return retval; -} - -static void __exit dsbr100_exit(void) -{ - usb_deregister(&usb_dsbr100_driver); -} - -module_init (dsbr100_init); -module_exit (dsbr100_exit); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/