Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <ca2f491fc97bdf6d7fc8d6fee5f702be27db6702.1602084104.git.viresh.kumar@linaro.org>
In-Reply-To: <ca2f491fc97bdf6d7fc8d6fee5f702be27db6702.1602084104.git.viresh.kumar@linaro.org>
From:   Viresh Kumar <viresh.kumar@linaro.org>
Date:   Thu, 8 Oct 2020 09:47:15 +0530
Message-ID: <CAKohpokqZ0dfRdiEv9_RtTRQh4OLU3LuCe18f4xsChxYkg05Lw@mail.gmail.com>
Subject: Re: [RFC V2] dt-bindings: mailbox : arm,mhuv2: Add bindings
To:     Rob Herring <robh+dt@kernel.org>,
        Jassi Brar <jaswinder.singh@linaro.org>,
        Viresh Kumar <viresh.kumar@linaro.org>, morten_bp@live.dk
Cc:     "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>,
        Vincent Guittot <vincent.guittot@linaro.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        Sudeep Holla <Sudeep.Holla@arm.com>,
        Frank Rowand <frowand.list@gmail.com>,
        Tushar Khandelwal <tushar.khandelwal@arm.com>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Updated Morten's email id as he is no longer with ARM.

On Wed, 7 Oct 2020 at 20:58, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> This patch adds device tree binding for ARM Message Handling Unit (MHU)
> controller version 2.
>
> Based on earlier work by Morten Borup Petersen.
>
> Co-developed-by: Morten Borup Petersen <morten.petersen@arm.com>
> Signed-off-by: Morten Borup Petersen <morten.petersen@arm.com>
> Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> ---
> Morten/Tushar,
>
> I have prepared this based on the best of my understanding about the
> hardware, but since I haven't worked on the actual hardware yet there
> are chances that I may have misunderstood some of it. Please lemme know
> if any of my understanding is incorrect.
>
> Here is the link to the previous attempt by Tushar to get it upstreamed
> long back:
>
> https://lore.kernel.org/lkml/20190717192616.1731-1-tushar.khandelwal@arm.com/
>
> This is very much a new approach and so I am not pointing out the
> differences from the previous one.
>
> I haven't started with redesigning the driver as of now and would like
> to get some feedback on the bindings first. Thanks in advance.
> ---
>  .../bindings/mailbox/arm,mhuv2.yaml           | 170 ++++++++++++++++++
>  1 file changed, 170 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
>
> diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
> new file mode 100644
> index 000000000000..3cbdc97f1f4c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
> @@ -0,0 +1,170 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM MHUv2 Mailbox Controller
> +
> +maintainers:
> +  - Morten Borup Petersen <morten.petersen@arm.com>
> +  - Viresh Kumar <viresh.kumar@linaro.org>
> +
> +description: |
> +  The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has
> +  between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional
> +  communication with remote processor(s), where the number of channel windows
> +  are implementation dependent.
> +
> +  Given the unidirectional nature of the controller, an MHUv2 mailbox may only
> +  be written to or read from. If a pair of MHU controllers is implemented
> +  between two processing elements to provide bidirectional communication, these
> +  must be specified as two separate mailboxes.
> +
> +  If the interrupts property is present in device tree node, then its treated as
> +  a receiver mailbox, otherwise a sender.
> +
> +  An MHU controller must be specified along with the supported transport
> +  protocols. The transport protocols determine the method of data transmission
> +  as well as the number of provided mailbox channels.
> +
> +  Following are the possible transport protocols.
> +
> +  - Doorbell: Each transfer is made up of single bit flag, using any one of the
> +    bits in a channel window. A channel window can support up to 32 doorbells
> +    and the entire window shall be used in doorbell mode.  Optionally, data may
> +    be transmitted through a shared memory region, wherein the MHU is used
> +    strictly as an interrupt generation mechanism but that is out of the scope
> +    of these bindings.
> +
> +  - Single-word: Each transfer is single word, using a single Channel window.
> +
> +  - Multi-word: Each transfer is made of two or more words, using two or more
> +    channel windows.
> +
> +# We need a select here so we don't match all nodes with 'arm,primecell'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: arm,mhuv2
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +        items:
> +          - const: arm,mhuv2
> +          - const: arm,primecell
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: apb_pclk
> +
> +  arm-mhuv2-mode:
> +    description: |
> +      The MHUv2 controller may contain up to 124 channel windows (each 32-bit
> +      wide). The hardware and the DT bindings allows any combination of those to
> +      be used for various transport protocols.
> +
> +      This property allows a platform to describe how these channel windows are
> +      used in various transport protocols. The entries in this property shall be
> +      present as an array of tuples, where each tuple describes details about
> +      one of the transport protocol being implemented over some channel
> +      window(s).
> +
> +      The first field of a tuple signifies the transfer protocol, 0 is reserved
> +      for doorbell protocol, 1 is reserved for single-word protocol and 2 is
> +      reserved for multi-word protocol. Using any other value in the first field
> +      of a tuple makes it invalid.
> +
> +      The second field of a tuple signifies the number of channel windows where
> +      the protocol would be used. For doorbell protocol this field signifies the
> +      number of 32-bit channel windows that implement the doorbell protocol. For
> +      single-word protocol this field signifies the number of 32-bit channel
> +      windows that implement separate single-word protocol mailbox channels. For
> +      multi-word protocol this field signifies the number of channel windows
> +      used for a multi-word protocol, it should be 2 or more.
> +
> +      The total number of channel windows specified here shouldn't be more than
> +      the ones implemented by the platform.
> +
> +      mhu: mailbox@2b1f0000 {
> +          ...
> +
> +          arm-mhuv2-mode = <0 2>, <1 3>, <2 5>, <2 7>;
> +      }
> +
> +      The above example defines the mode of an ARM MHUv2 mailbox controller,
> +      where a total of 17 channel windows are used. The first two windows are
> +      used in doorbell mode (64 doorbells), the next 3 windows are (separately)
> +      used in single-word mode, and the last two mailbox channels are used in
> +      multi-word mode of length 5 and 7 channel windows.
> +
> +  '#mbox-cells':
> +    description: |
> +      It contains two fields, the first field represents the channel number,
> +      which may be used in doorbell, single-word, or multi-word mode, and the
> +      second field (only relevant in doorbell mode, ignored otherwise)
> +      represents the doorbell number within the 32 bit wide channel window.
> +
> +      From the example given above for the arm-mhuv2-mode, here is how a client
> +      node can reference them.
> +
> +      mboxes = <&mhu 0 5>; // Mailbox channel 0, doorbell 5.
> +      mboxes = <&mhu 1 7>; // Mailbox channel 1, doorbell 7.
> +      mboxes = <&mhu 2 0>; // Mailbox channel 2, single-word mode.
> +      mboxes = <&mhu 4 0>; // Mailbox channel 4, single-word mode.
> +      mboxes = <&mhu 6 0>; // Mailbox channel 6, multi-word mode with 7 windows.
> +
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#mbox-cells'
> +  - arm-mhuv2-mode
> +
> +additionalProperties: false
> +
> +examples:
> +  # Multiple transport protocols implemented by the mailbox controller
> +  # configured in sender mode
> +  - |
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        mhu: mailbox@2b1f0000 {
> +            #mbox-cells = <2>;
> +            compatible = "arm,mhuv2", "arm,primecell";
> +            reg = <0 0x2b1f0000 0 0x1000>;
> +            clocks = <&clock 0>;
> +            clock-names = "apb_pclk";
> +            arm-mhuv2-mode = <1 5>, <2 2>, <2 5>, <2 7>, <0 2>;
> +        };
> +
> +        mhu_client: scb@2e000000 {
> +            compatible = "fujitsu,mb86s70-scb-1.0";
> +            reg = <0 0x2e000000 0 0x4000>;
> +
> +            mboxes =
> +                     //single-word protocol channel 0
> +                     <&mhu 0 0>,
> +                     //single-word protocol channel 4
> +                     <&mhu 4 0>,
> +                     //multi-word protocol channel 6 with 5 windows
> +                     <&mhu 6 0>,
> +                     //doorbell protocol channel 9, doorbell 27
> +                     <&mhu 9 27>;
> +        };
> +    };
> --
> 2.25.0.rc1.19.g042ed3e048af
>