Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
To:     sboyd@kernel.org, agross@kernel.org, bjorn.andersson@linaro.org,
        manivannan.sadhasivam@linaro.org, devicetree@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        robh+dt@kernel.org
Cc:     sricharan@codeaurora.org, gokulsri@codeaurora.org
Subject: [PATCH v3 0/3] Add board support for HK10 board variants
Date:   Thu,  8 Oct 2020 18:02:21 +0530
Message-Id: <1602160344-19586-1-git-send-email-gokulsri@codeaurora.org>
Precedence: bulk

Added support for HK10-C1 and HK10-C2 board variants based on IPQ8074 SoC.
Both these variants support dual QCN9000 PCIe cards that uses MHI communication
protocol over PCIe. In addition, HK10-C1 support on-chip radio.
Both these variants slightly differ in clock configuation for ethernet.

This series depends on below series:
[V2,0/7] Add PCIe support for IPQ8074
[v7,0/9] remoteproc: qcom: q6v5-wcss: Add support for secure pil

changes since v2:
 - In patch 3, Moved pcie0_rp and pcie1_rp nodes and
   removed unused members and subnodes

Gokul Sriram Palanisamy (3):
  dt-bindings: qcom: Add ipq8074 bindings
  arm64: dts: Add board support for HK10
  arm64: dts: Enabled MHI device over PCIe

 Documentation/devicetree/bindings/arm/qcom.yaml |   4 +
 arch/arm64/boot/dts/qcom/Makefile               |   2 +
 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts    |  11 +++
 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts    |  14 +++
 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi      | 123 ++++++++++++++++++++++++
 5 files changed, 154 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi

-- 
2.7.4