Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20201012033150.21056-1-billy_tsai@aspeedtech.com> <20201012033150.21056-2-billy_tsai@aspeedtech.com>
In-Reply-To: <20201012033150.21056-2-billy_tsai@aspeedtech.com>
From:   Joel Stanley <joel@jms.id.au>
Date:   Mon, 12 Oct 2020 04:30:00 +0000
Message-ID: <CACPK8XcQ+uodvYCyL7_RO9W2QF+AA2LidHhXi2tR3_uriQFccQ@mail.gmail.com>
Subject: Re: [PATCH 1/3] Arm: dts: aspeed-g6: Fix the register range of gpio
To:     Billy Tsai <billy_tsai@aspeedtech.com>
Cc:     Rob Herring <robh+dt@kernel.org>, Andrew Jeffery <andrew@aj.id.au>,
        devicetree <devicetree@vger.kernel.org>,
        Linux ARM <linux-arm-kernel@lists.infradead.org>,
        linux-aspeed <linux-aspeed@lists.ozlabs.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
        OpenBMC Maillist <openbmc@lists.ozlabs.org>,
        BMC-SW <BMC-SW@aspeedtech.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Mon, 12 Oct 2020 at 03:32, Billy Tsai <billy_tsai@aspeedtech.com> wrote:
>
> This patch is used to fix the memory range of gpio0
>
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>

Reviewed-by: Joel Stanley <joel@jms.id.au>

> ---
>  arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 97ca743363d7..ad19dce038ea 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -357,7 +357,7 @@
>                                 #gpio-cells = <2>;
>                                 gpio-controller;
>                                 compatible = "aspeed,ast2600-gpio";
> -                               reg = <0x1e780000 0x800>;
> +                               reg = <0x1e780000 0x400>;
>                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
>                                 gpio-ranges = <&pinctrl 0 0 208>;
>                                 ngpios = <208>;
> --
> 2.17.1
>