Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 14 Oct 2020 15:19:46 +0100
From:   Daniel Thompson <daniel.thompson@linaro.org>
To:     Alexandru Stan <amstan@chromium.org>
Cc:     Thierry Reding <thierry.reding@gmail.com>,
        Uwe =?utf-8?Q?Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>, Lee Jones <lee.jones@linaro.org>,
        Jingoo Han <jingoohan1@gmail.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Heiko Stuebner <heiko@sntech.de>,
        Rob Herring <robh+dt@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Douglas Anderson <dianders@chromium.org>,
        Enric Balletbo i Serra <enric.balletbo@collabora.com>,
        Matthias Kaehlcke <mka@chromium.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org
Subject: Re: [PATCH v2 2/3] ARM: dts: rockchip: veyron: Remove 0 point from
 brightness-levels
Message-ID: <20201014141946.mkrvpkrttucffkhj@holly.lan>
References: <20201013080103.410133-1-amstan@chromium.org>
 <20201013010056.v2.2.I96b8d872ec51171f19274e43e96cadc092881271@changeid>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201013010056.v2.2.I96b8d872ec51171f19274e43e96cadc092881271@changeid>
Precedence: bulk

On Tue, Oct 13, 2020 at 01:01:02AM -0700, Alexandru Stan wrote:
> After the "PWM backlight interpolation adjustments" patches, the
> backlight interpolation works a little differently. The way these
> dts files were working before was relying on a bug (IMHO).
> 
> Remove the 0-3 range since otherwise we would have a 252 long
> interpolation that would slowly go between 0 and 3, looking really bad
> in userspace.
> 
> We don't need the 0% point, userspace seems to handle this just fine
> because it uses the bl_power property to turn off the display.
> 
> Signed-off-by: Alexandru Stan <amstan@chromium.org>

Acked-by: Daniel Thompson <daniel.thompson@linaro.org>

Note also shouldn't this be patch 1 of the set. AFAICT it makes sense
whether or not the interpolation algorithm is changed.


Daniel.

> ---
> 
>  arch/arm/boot/dts/rk3288-veyron-jaq.dts    | 2 +-
>  arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 +-
>  arch/arm/boot/dts/rk3288-veyron-tiger.dts  | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> index af77ab20586d..4a148cf1defc 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> @@ -20,7 +20,7 @@ / {
>  
>  &backlight {
>  	/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
> -	brightness-levels = <0 8 255>;
> +	brightness-levels = <8 255>;
>  	num-interpolated-steps = <247>;
>  };
>  
> diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> index f8b69e0a16a0..82fc6fba9999 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> @@ -39,7 +39,7 @@ volum_up {
>  
>  &backlight {
>  	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
> -	brightness-levels = <0 3 255>;
> +	brightness-levels = <3 255>;
>  	num-interpolated-steps = <252>;
>  };
>  
> diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
> index 069f0c2c1fdf..52a84cbe7a90 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
> @@ -23,7 +23,7 @@ / {
>  
>  &backlight {
>  	/* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */
> -	brightness-levels = <0 3 255>;
> +	brightness-levels = <3 255>;
>  	num-interpolated-steps = <252>;
>  };
>  
> -- 
> 2.28.0
>