Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 22 Oct 2020 03:16:39 +0300
From:   Vladimir Oltean <olteanv@gmail.com>
To:     Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Cc:     Christian Eggers <ceggers@arri.de>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Helmut Grohne <helmut.grohne@intenta.de>,
        Paul Barker <pbarker@konsulko.com>,
        Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
        George McCollister <george.mccollister@gmail.com>,
        Marek Vasut <marex@denx.de>,
        Tristram Ha <Tristram.Ha@microchip.com>,
        "David S . Miller" <davem@davemloft.net>,
        Woojung Huh <woojung.huh@microchip.com>,
        Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
        netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH net-next 1/9] dt-bindings: net: dsa: convert ksz
 bindings document to yaml
Message-ID: <20201022001639.ozbfnyc4j2zlysff@skbuf>
References: <20201019172435.4416-1-ceggers@arri.de>
 <20201019172435.4416-2-ceggers@arri.de>
 <87lfg0rrzi.fsf@kurt>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <87lfg0rrzi.fsf@kurt>
Precedence: bulk

On Wed, Oct 21, 2020 at 08:52:01AM +0200, Kurt Kanzenbach wrote:
> On Mon Oct 19 2020, Christian Eggers wrote:
> The node names should be switch. See dsa.yaml.
> 
> > +            compatible = "microchip,ksz9477";
> > +            reg = <0>;
> > +            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> > +
> > +            spi-max-frequency = <44000000>;
> > +            spi-cpha;
> > +            spi-cpol;
> > +
> > +            ports {
> 
> ethernet-ports are preferred.

This is backwards to me, instead of an 'ethernet-switch' with 'ports',
we have a 'switch' with 'ethernet-ports'. Whatever.