Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751350AbWHMRgz (ORCPT ); Sun, 13 Aug 2006 13:36:55 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751351AbWHMRgz (ORCPT ); Sun, 13 Aug 2006 13:36:55 -0400 Received: from smtp3-g19.free.fr ([212.27.42.29]:18919 "EHLO smtp3-g19.free.fr") by vger.kernel.org with ESMTP id S1751350AbWHMRgy (ORCPT ); Sun, 13 Aug 2006 13:36:54 -0400 Message-ID: <44DF6395.8030307@free.fr> Date: Sun, 13 Aug 2006 19:38:29 +0200 From: Laurent Riffard User-Agent: Mozilla/5.0 (X11; U; Linux i686; fr-FR; rv:1.8.0.4) Gecko/20060405 SeaMonkey/1.0.2 MIME-Version: 1.0 To: Andrew Morton , Kernel development list Subject: Re: 2.6.18-rc4-mm1 References: <20060813012454.f1d52189.akpm@osdl.org> In-Reply-To: <20060813012454.f1d52189.akpm@osdl.org> X-Enigmail-Version: 0.94.0.0 Content-Type: multipart/mixed; boundary="------------040105050702050201090907" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28528 Lines: 588 This is a multi-part message in MIME format. --------------040105050702050201090907 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Le 13.08.2006 10:24, Andrew Morton a ?crit : > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc4/2.6.18-rc4-mm1/ > > - Warning: all the Serial ATA Kconfig options have been renamed. If you > blindly run `make oldconfig' you won't have any disks. > Tried pata_via : it could not identify my DVD drive (LG HL-DT-ST DVDRAM GSA-4165B): Here is an excerpt from dmesg: libata version 2.00 loaded. pata_via 0000:00:04.1: version 0.1.13 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xD800 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xD808 irq 15 scsi0 : pata_via input: AT Translated Set 2 keyboard as /class/input/input0 ata1.00: ATA-5, max UDMA/100, 78165360 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA/133, 160086528 sectors: LBA ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 scsi1 : pata_via input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 ata2.00: failed to IDENTIFY (device reports illegal type, err_mask=0x0) <======= here ata2.01: ATAPI, max MWDMA2, CDB intr ata2.01: configured for MWDMA2 scsi 0:0:0:0: Direct access ATA ST340016A 3.75 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD/DVD E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5 And here is an except from dmesg-2.6.18-rc3-mm2 with via via82cxxx driver: VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 hda: ST340016A, ATA DISK drive hdb: Maxtor 6Y080L0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 hdb: max request size: 128KiB hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 > Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GSA-4165B, ATAPI CD/DVD-ROM drive hdd: CD-950E/AKU, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Full dmesg attached. ~~ laurent --------------040105050702050201090907 Content-Type: text/plain; name="dmesg-2.6.18-rc4-mm1" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.18-rc4-mm1" Linux version 2.6.18-rc4-mm1 (laurent@antares.localdomain) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #91 Sun Aug 13 12:14:47 CEST 2006 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001feec000 end: 000000001ffec000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001ffec000 size: 0000000000003000 end: 000000001ffef000 type: 3 copy_e820_map() start: 000000001ffef000 size: 0000000000010000 end: 000000001ffff000 type: 2 copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4 copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131052 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126956 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6a80 ACPI: RSDT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x1ffec000 ACPI: FADT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x1ffec080 ACPI: BOOT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x1ffec040 ACPI: DSDT (v001 ASUS A7V133-C 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) Detected 1410.372 MHz processor. Built 1 zonelists. Total pages: 131052 Kernel command line: root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb6 netconsole=@192.163.0.3/,@192.168.0.1/00:0E:9B:91:ED:72 netconsole: local port 6665 netconsole: local IP 192.163.0.3 netconsole: interface eth0 netconsole: remote port 6666 netconsole: remote IP 192.168.0.1 netconsole: remote ethernet address 00:0e:9b:91:ed:72 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01407000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096 memory used by lock dependency info: 904 kB per task-struct memory footprint: 1200 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514020k/524208k available (1613k kernel code, 9564k reserved, 1194k data, 160k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB) lowmem : 0xc0000000 - 0xdffec000 ( 511 MB) .init : 0xc03c2000 - 0xc03ea000 ( 160 kB) .data : 0xc029374e - 0xc03be1f8 (1194 kB) .text : 0xc0100000 - 0xc029374e (1613 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2824.46 BogoMIPS (lpj=5648933) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 1600+ stepping 02 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0005) - 356 Objects with 38 Devices 115 Methods 24 Regions ACPI Namespace successfully loaded at root c0572630 ACPI: setting ELCR to 0200 (from 0c20) evxfevnt-0089 [02] enable : Transition to ACPI mode successful checking if image is initramfs... it is Freeing initrd memory: 398k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 Setting up standard PCI resources evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................................... Initialized 23/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 41 objects) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region e200-e27f claimed by vt82c686 HW-mon PCI quirk: region e800-e80f claimed by vt82c686 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFEA [20060707] ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFEA [20060707] ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFEA [20060707] PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: c6000000-c7efffff PREFETCH window: c7f00000-cfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 7, 655360 bytes) TCP bind hash table entries: 8192 (order: 6, 360448 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x3a set to 0x1 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 16 throttling states) RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL-8029 found at 0xa400, IRQ 10, 00:40:95:46:6E:2D. netconsole: device eth0 not up yet, forcing it netconsole: carrier detect appears untrustworthy, waiting 4 seconds ================================= [ INFO: inconsistent lock state ] 2.6.18-rc4-mm1 #91 --------------------------------- inconsistent {in-softirq-W} -> {softirq-on-W} usage. swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes: (&dev->_xmit_lock){-+..}, at: [] netpoll_send_skb+0x6b/0xdb {in-softirq-W} state was registered at: [] __lock_acquire+0x3e1/0x9aa [] lock_acquire+0x60/0x80 [] _spin_lock+0x19/0x28 [] dev_watchdog+0x11/0xaf [] run_timer_softirq+0xed/0x145 [] __do_softirq+0x46/0x9c [] do_softirq+0x2a/0x42 [] irq_exit+0x31/0x33 [] do_IRQ+0x97/0xa6 [] common_interrupt+0x25/0x2c [] cpu_idle+0x3c/0x51 [] rest_init+0x1e/0x23 [] start_kernel+0x2e2/0x2e4 [] 0xc0100199 [] 0xffffffff irq event stamp: 623920 hardirqs last enabled at (623919): [] _spin_unlock_irqrestore+0x36/0x3c hardirqs last disabled at (623920): [] _spin_lock_irqsave+0xf/0x32 softirqs last enabled at (623880): [] dev_mc_upload+0x36/0x3a softirqs last disabled at (623876): [] _spin_lock_bh+0xb/0x2d other info that might help us debug this: 1 lock held by swapper/1: #0: (&dev->_xmit_lock){-+..}, at: [] netpoll_send_skb+0x6b/0xdb stack backtrace: [] show_trace_log_lvl+0x12/0x25 [] show_trace+0xd/0x10 [] dump_stack+0x19/0x1b [] print_usage_bug+0x1d1/0x1de [] mark_lock+0x22d/0x349 [] mark_held_locks+0x47/0x65 [] trace_hardirqs_on+0xef/0x119 [] ei_start_xmit+0x258/0x27e [] netpoll_send_skb+0x89/0xdb [] netpoll_send_udp+0x1fd/0x208 [] write_msg+0x42/0x6a [] __call_console_drivers+0x3b/0x48 [] _call_console_drivers+0x54/0x58 [] release_console_sem+0x122/0x1ed [] register_console+0x190/0x197 [] init_netconsole+0x4e/0x62 [] init+0x88/0x209 [] kernel_thread_helper+0x5/0xb ======================= netconsole: network logging started Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 160k freed Write protecting the kernel read-only data: 712k Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. SCSI subsystem initialized libata version 2.00 loaded. pata_via 0000:00:04.1: version 0.1.13 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xD800 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xD808 irq 15 scsi0 : pata_via input: AT Translated Set 2 keyboard as /class/input/input0 ata1.00: ATA-5, max UDMA/100, 78165360 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA/133, 160086528 sectors: LBA ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 scsi1 : pata_via input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 ata2.00: failed to IDENTIFY (device reports illegal type, err_mask=0x0) ata2.01: ATAPI, max MWDMA2, CDB intr ata2.01: configured for MWDMA2 scsi 0:0:0:0: Direct access ATA ST340016A 3.75 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD/DVD E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5 SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 > sd 0:0:1:0: Attached scsi disk sdb sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 device-mapper: ioctl: 4.8.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.2: irq 5, io base 0x0000d400 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18-rc4-mm1 uhci_hcd usb usb1: SerialNumber: 0000:00:04.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected warning: process `sleep' used the obsolete sysctl system call ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.3: irq 5, io base 0x0000d000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18-rc4-mm1 uhci_hcd usb usb2: SerialNumber: 0000:00:04.3 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 usb 1-2: new low speed USB device using uhci_hcd and address 2 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[c5800000-c58007ff] Max Packet=[2048] IR/IT contexts=[8/8] usb 1-2: new device found, idVendor=044f, idProduct=b303 usb 1-2: new device strings: Mfr=4, Product=30, SerialNumber=0 usb 1-2: Product: FireStorm Dual Analog 2 usb 1-2: Manufacturer: THRUSTMASTER usb 1-2: configuration #1 chosen from 1 choice ohci1394: fw-host0: Running dma failed because Node ID is not valid input: THRUSTMASTER FireStorm Dual Analog 2 as /class/input/input2 input: USB HID v1.10 Gamepad [THRUSTMASTER FireStorm Dual Analog 2] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver warning: process `date' used the obsolete sysctl system call ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... input: PC Speaker as /class/input/input3 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport0: Printer, HEWLETT-PACKARD DESKJET 710C parport_pc: VIA parallel port: io=0x378, irq=7 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca] lp0: using parport0 (interrupt-driven). Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: AGP aperture is 256M @ 0xd0000000 Using specific hotkey driver EXT3 FS on dm-4, internal journal Adding 64220k swap on /dev/sda5. Priority:2 extents:1 across:64220k ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names ReiserFS: dm-6: found reiserfs format "3.6" with standard journal ReiserFS: dm-6: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-6: checking transaction log (dm-6) ReiserFS: dm-6: Using r5 hash to sort names Loading Reiser4. See www.namesys.com for a description of Reiser4. ps_hash_table: 32 buckets d_cursor_hash_table: 256 buckets z_hash_table: 8192 buckets z_hash_table: 8192 buckets j_hash_table: 16384 buckets loading reiser4 bitmap......done (34 jiffies) d_cursor_hash_table: 256 buckets z_hash_table: 8192 buckets z_hash_table: 8192 buckets j_hash_table: 16384 buckets loading reiser4 bitmap......done (33 jiffies) ReiserFS: sda7: found reiserfs format "3.6" with standard journal ReiserFS: sda7: using ordered data mode reiserfs: using flush barriers ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda7: checking transaction log (sda7) ReiserFS: sda7: Using r5 hash to sort names ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: loaded (max 8 devices) warning: process `ls' used the obsolete sysctl system call warning: process `prcsys' used the obsolete sysctl system call warning: process `prcsys' used the obsolete sysctl system call Using specific hotkey driver ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 NET: Registered protocol family 17 ReiserFS: dm-5: found reiserfs format "3.6" with standard journal ReiserFS: dm-5: using ordered data mode reiserfs: using flush barriers ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-5: checking transaction log (dm-5) ReiserFS: dm-5: Using r5 hash to sort names UDF-fs: No VRS found attempt to access beyond end of device sda3: rw=0, want=68, limit=2 attempt to access beyond end of device sda3: rw=0, want=1252, limit=2 attempt to access beyond end of device sda3: rw=0, want=1028, limit=2 UDF-fs: No partition found (1) FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sda3. UDF-fs: No partition found (1) FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sda6. UDF-fs: No VRS found attempt to access beyond end of device sdb2: rw=0, want=68, limit=2 attempt to access beyond end of device sdb2: rw=0, want=1252, limit=2 attempt to access beyond end of device sdb2: rw=0, want=1028, limit=2 UDF-fs: No partition found (1) FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdb2. UDF-fs: No VRS found attempt to access beyond end of device sdb2: rw=0, want=68, limit=2 attempt to access beyond end of device sdb2: rw=0, want=1252, limit=2 attempt to access beyond end of device sdb2: rw=0, want=1028, limit=2 UDF-fs: No partition found (1) FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdb2. UDF-fs: No VRS found UDF-fs: No VRS found FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdb6. UDF-fs: No VRS found FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdb7. UDF-fs: No partition found (1) FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sdb8. --------------040105050702050201090907-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/