Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: Arvind Sankar <niveditas98@gmail.com>
From:   Arvind Sankar <nivedita@alum.mit.edu>
Date:   Sat, 24 Oct 2020 22:20:03 -0400
To:     Arvind Sankar <nivedita@alum.mit.edu>
Cc:     x86@kernel.org, linux-kernel@vger.kernel.org,
        "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
        Kees Cook <keescook@chromium.org>,
        Joerg Roedel <jroedel@suse.de>
Subject: Re: RFC x86/boot/64: BOOT_PGT_SIZE definition for compressed kernel
Message-ID: <20201025022003.GA971914@rani.riverdale.lan>
References: <20201025004158.GA767345@rani.riverdale.lan>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20201025004158.GA767345@rani.riverdale.lan>
Precedence: bulk

On Sat, Oct 24, 2020 at 08:41:58PM -0400, Arvind Sankar wrote:
> Hi, I think the definition of BOOT_PGT_SIZE in
> arch/x86/include/asm/boot.h is insufficient, especially after
>   ca0e22d4f011 ("x86/boot/compressed/64: Always switch to own page table")
> 
> Currently, it allocates 6 pages if KASLR is disabled, and either 17 or
> 19 pages depending on X86_VERBOSE_BOOTUP if KASLR is enabled.
> 
> - The X86_VERBOSE_BOOTUP test shouldn't be done: that only disables
>   debug messages, but warnings/errors are always output to VGA memory,
>   so the two extra pages for mapping video RAM are always needed.
> 
> - The calculation wasn't updated for X86_5LEVEL, which requires at least
>   one more page for the P4D level, and in theory could require two extra
>   pages for each of the 4 mappings (compressed kernel, output kernel,
>   boot_params and command line), though that would require a system with
>   truly ginormous amounts of RAM.
> 
> - If KASLR is disabled, there are only 6 pages, but now that we're
>   always setting up our own page table, we need 1+(2+2)*3 (one PGD, and
>   two PUD and two PMD pages for kernel, boot_params and command line),
>   and 2 more pages for the video RAM, and more for 5-level. Even for
>   !RELOCATABLE, 13 pages might be needed.
> 
> - SEV-ES needs one more page because it needs to do a PTE-level mapping
>   for the GHCB page.
> 
> - The static calculation is also busted because
>   boot/compressed/{kaslr.c,acpi.c} can scan the setup data, EFI
>   configuration tables and the EFI memmap, and none of these are
>   accounted for. They used to be scanned while still on the
>   firmware/bootloader page tables, but now our page tables have to cover
>   them as well. Trying to add up the worst case for all of these, and
>   anything else the compressed kernel might potentially access seems
>   like a lost cause.
> 
> We could do something similar to what the main kernel does with
> early_dynamic_pgts: map the compressed kernel at a fixed virtual
> address (in negative address space, say); recycle all the other mappings
> until we're done with decompression, and then map the output,
> boot_params and command line. The number of pages needed for this can be
> statically calculated, for 4-level paging we'd need 2 pages for the
> fixed mapping, 12 pages for the other three, and one PGD page.
> 
> Thoughts?

Or just bump BOOT_PGT_SIZE to some largeish number?