Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: nguyenb=codeaurora.org@mg.codeaurora.org
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Mon, 26 Oct 2020 13:48:41 -0700
From:   nguyenb@codeaurora.org
To:     cang@codeaurora.org, asutoshd@codeaurora.org,
        martin.petersen@oracle.com, linux-scsi@vger.kernel.org
Cc:     linux-arm-msm@vger.kernel.org,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Avri Altman <avri.altman@wdc.com>,
        "James E.J. Bottomley" <jejb@linux.ibm.com>,
        Stanley Chu <stanley.chu@mediatek.com>,
        Bean Huo <beanhuo@micron.com>,
        Bart Van Assche <bvanassche@acm.org>,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/1] scsi: ufshcd: Properly set the device Icc Level
In-Reply-To: <5c9d6f76303bbe5188bf839b2ea5e5bf530e7281.1598923023.git.nguyenb@codeaurora.org>
References: <5c9d6f76303bbe5188bf839b2ea5e5bf530e7281.1598923023.git.nguyenb@codeaurora.org>
Message-ID: <ed90f20f8deb0e322b7961a4b0a65681@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Precedence: bulk

On 2020-08-31 18:19, Bao D. Nguyen wrote:
> UFS version 3.0 and later devices require Vcc and Vccq power supplies
> with Vccq2 being optional. While earlier UFS version 2.0 and 2.1
> devices, the Vcc and Vccq2 are required with Vccq being optional.
> Check the required power supplies used by the device
> and set the device's supported Icc level properly.
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
> ---
>  drivers/scsi/ufs/ufshcd.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 06e2439..fdd1d3e 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6845,8 +6845,9 @@ static u32
> ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,
>  {
>  	u32 icc_level = 0;
> 
> -	if (!hba->vreg_info.vcc || !hba->vreg_info.vccq ||
> -						!hba->vreg_info.vccq2) {
> +	if (!hba->vreg_info.vcc ||
> +		(!hba->vreg_info.vccq && hba->dev_info.wspecversion >= 0x300) ||
> +		(!hba->vreg_info.vccq2 && hba->dev_info.wspecversion < 0x300)) {
>  		dev_err(hba->dev,
>  			"%s: Regulator capability was not set, actvIccLevel=%d",
>  							__func__, icc_level);
Hello,
Could you please help review?
Thank you.