Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   gengcixi@gmail.com
To:     gregkh@linuxfoundation.org, jirislaby@kernel.org,
        oberpar@linux.ibm.com, linux-serial@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     orsonzhai@gmail.com, zhang.lyra@gmail.com,
        Cixi Geng <cixi.geng1@unisoc.com>
Subject: [PATCH V8] GCOV: Add config to check the preqequisites situation
Date:   Wed, 28 Oct 2020 21:15:05 +0800
Message-Id: <20201028131505.482037-1-gengcixi@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Cixi Geng <cixi.geng1@unisoc.com>

Introduce new configuration option GCOV_PROFILE_PREREQS that can be
used to check whether the prerequisites for enabling gcov profiling
for specific files and directories are met.

Only add SERIAL_GCOV for an example.

Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
---
 drivers/tty/serial/Kconfig  | 7 +++++++
 drivers/tty/serial/Makefile | 1 +
 kernel/gcov/Kconfig         | 9 +++++++++
 3 files changed, 17 insertions(+)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1044fc387691..fa33710c8435 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1586,3 +1586,10 @@ endmenu
 
 config SERIAL_MCTRL_GPIO
 	tristate
+
+config SERIAL_GCOV
+	bool "Enable profile gcov for serial directory"
+	depends on GCOV_PROFILE_PREREQS
+	help
+	  The SERIAL_GCOV will add Gcov profiling flags when kernel compiles.
+	  Say 'Y' here if you want the gcov data for the serial directory,
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index caf167f0c10a..4a4934622c3f 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -3,6 +3,7 @@
 # Makefile for the kernel serial device drivers.
 #
 
+GCOV_PROFILE := $(CONFIG_SERIAL_GCOV)
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 
 obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 3110c77230c7..ce9b8ce4e63b 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -51,4 +51,13 @@ config GCOV_PROFILE_ALL
 	larger and run slower. Also be sure to exclude files from profiling
 	which are not linked to the kernel image to prevent linker errors.
 
+config GCOV_PROFILE_PREREQS
+	bool "Profile Kernel for prereqs"
+	def_bool y if GCOV_KERNEL && !COMPILE_TEST
+	help
+	  This options activates profiling for the specified kernel modules.
+	  When some modules need Gcov data, enable this config, then configure
+	  with gcov on the corresponding modules,The directories or files of
+	  these modules will be added profiling flags after kernel compile.
+
 endmenu
-- 
2.25.1