Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Matteo Scordino <matteo.scordino@gmail.com>
To:     mripard@kernel.org, wens@csie.org, robh+dt@kernel.org,
        linux-arm-kernel@lists.infradead.org
Cc:     linux-kernel@vger.kernel.org,
        Matteo Scordino <matteo.scordino@gmail.com>
Subject: [PATCH 0/5] Elimo Impetus and Initium support
Date:   Thu, 29 Oct 2020 02:19:55 +0000
Message-Id: <20201029022000.601913-1-matteo.scordino@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Elimo Impetus is an Open Source Hardware System-on-Module based on the 
SoChip S3 SoC.
It is meant for integration into carrier boards or, more generally, larger 
designs, and uses an M2 connector to facilitate that.
The Elimo Initium is a carrier board for the Impetus, together they provide a 
fully open source SBC.

This patch set adds support for both. It it based off the sunxi/dt-for-5.11
branch of the https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
tree.

Matteo Scordino (5):
  dt-bindings: vendors: add Elimo Engineering vendor prefix
  ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi
  ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM
  dt-bindings: arm: sunxi: add Elimo bindings
  ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC

 .../devicetree/bindings/arm/sunxi.yaml        | 10 ++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 51 +++++++++++++++++++
 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts  | 27 ++++++++++
 arch/arm/boot/dts/sun8i-v3.dtsi               |  5 ++
 6 files changed, 96 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts

-- 
2.20.1