Received: by 2002:a05:6a10:9e8c:0:0:0:0 with SMTP id y12csp296789pxx; Thu, 29 Oct 2020 02:56:03 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxJDCmY4yjoSn2zPSdaH46PSQh6pi3kLaQl5juDNLxzzHQYDiUQa+oMYLyiGprFpzcZ5kfd X-Received: by 2002:aa7:dad6:: with SMTP id x22mr3249399eds.136.1603965363021; Thu, 29 Oct 2020 02:56:03 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1603965363; cv=none; d=google.com; s=arc-20160816; b=xHIM+uYsx/f2xynHWSqslNU/0ojecZR6V8zlnlzyWLBCvU3fWB/cpvgRqVxZ2nvFuv p1LyplMz/8AlGFo2ZdMlvKYRaTKRHo0BVA9Tlx+kMXp9Is6+Qg52umGWA2UgHIss85RS Pw94ekyIztHdLWg8fP1sa3/xTBjpZi4WBBM5l3p4K+25OSdK6646fa7hJV9yBvaTUxXp u8t8XH3g83ay4p/QF9dsykyiXd/ADh4m0amv8tm5vRkDHGYPe3bk4F8eK8Otakt9oVM9 sGv3kpeDsYP8z0BUHyzK87cfYrDtOQkEYRfaPrV/MjEjg5jtkuP/XXIWAAeuoMpelpZ7 LWEw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=iGF/rGHwTe3SoJUtDfLYfB5whZbQ0pMkjVpD0rC6IEk=; b=zJUSnPTyegk+lrXFplrofoiEkZrEEn6WE1Ha6GqNtxyoApF5PcGZ5y7HOGmjdwVVOd FKaBAAr5j1YhZU7jx/gWd3/TIRy71OB+PDNHUJRYYMnxHht5vSyV2h4l8KSBABTN1WdN 3mWjFxSpmld7gVg7iWF93R4cXXC6yHvaiQyYxcfejyhdA3EfdUjGS8OEjMGuI7y8QAyu QUyjC46ee8KsDm5j25Zl9nl/WVjtBo/+c1qH/Ij6ZkHMivbw6+lKdqAZi5FF/TcXrozj sckGZrvLkG62urOahTGjZI5N9Ps1IcRKJfyx16sK6DVHQcuSYwf2GHM0vnYAxxBVSMdF ieVg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=X6zGr5sh; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id i2si1472067ejx.87.2020.10.29.02.55.40; Thu, 29 Oct 2020 02:56:02 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=X6zGr5sh; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731894AbgJ1WSI (ORCPT + 99 others); Wed, 28 Oct 2020 18:18:08 -0400 Received: from mail.kernel.org ([198.145.29.99]:60512 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731659AbgJ1WRm (ORCPT ); Wed, 28 Oct 2020 18:17:42 -0400 Received: from mail.kernel.org (ip5f5ad5b2.dynamic.kabel-deutschland.de [95.90.213.178]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 53F9D247A6; Wed, 28 Oct 2020 14:23:36 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1603895016; bh=2h1em4MKg/z2IEKdQjvRnCIKR9rh1a2kR/O2PwYBlqc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=X6zGr5shoBQH7QRrAxUmIwVMrC1hzHTK8IePZqHJDWWvHcet8KUQ1wMbt/H6RSTp4 +Y+HcyyQPbDPvfkkdnIL1wjddkT4XSGTO7+6ge3lDwOfMWDUlRYrspgQbv+YqrbtIT /BgohNLiASJQmz5OxM5jn123tKKuagXo1s7/55pU= Received: from mchehab by mail.kernel.org with local (Exim 4.94) (envelope-from ) id 1kXmMP-003hlx-HF; Wed, 28 Oct 2020 15:23:33 +0100 From: Mauro Carvalho Chehab To: Linux Doc Mailing List , Greg Kroah-Hartman Cc: Mauro Carvalho Chehab , "Jonathan Corbet" , "Rafael J. Wysocki" , Akira Shimahara , Andrew Donnellan , Andy Shevchenko , Bart Van Assche , Bartlomiej Zolnierkiewicz , Chanwoo Choi , Christian Gromm , Danil Kipnis , Darren Hart , Evgeniy Polyakov , Frederic Barrat , Gregory CLEMENT , Ivan Zaentsev , Jack Wang , Jason Gunthorpe , Jens Axboe , Jithu Joseph , Jolly Shah , Kamil Konieczny , Lukasz Luba , Luwei Kang , Marek Behun , Michael Ellerman , Michal Simek , Philippe Bergheaud , Rajan Vaja , Richard Gong , Sebastian Reichel , Srinivas Pandruvada , Tejas Patel , Vadim Pasternak , Wu Hao , Xu Yilun , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, platform-driver-x86@vger.kernel.org Subject: [PATCH 27/33] docs: ABI: fix syntax to be parsed using ReST notation Date: Wed, 28 Oct 2020 15:23:25 +0100 Message-Id: <96879fd4fb55f395cb82fdccf5032f92d649451c.1603893146.git.mchehab+huawei@kernel.org> X-Mailer: git-send-email 2.26.2 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: Mauro Carvalho Chehab Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Signed-off-by: Mauro Carvalho Chehab --- .../ABI/stable/sysfs-driver-firmware-zynqmp | 62 ++++++++----- Documentation/ABI/testing/debugfs-moxtet | 28 ++++-- .../ABI/testing/debugfs-turris-mox-rwtm | 6 +- .../sysfs-bus-event_source-devices-dfl_fme | 14 +-- Documentation/ABI/testing/sysfs-bus-most | 6 +- Documentation/ABI/testing/sysfs-class-devfreq | 6 +- Documentation/ABI/testing/sysfs-class-ocxl | 14 +-- .../ABI/testing/sysfs-class-power-wilco | 18 ++-- .../ABI/testing/sysfs-class-rnbd-client | 93 ++++++++++--------- .../ABI/testing/sysfs-class-rtrs-client | 23 +++-- .../sysfs-devices-platform-stratix10-rsu | 10 ++ .../ABI/testing/sysfs-driver-w1_therm | 75 ++++++++++----- .../ABI/testing/sysfs-platform-dfl-fme | 14 ++- Documentation/ABI/testing/sysfs-platform-dptf | 11 ++- .../sysfs-platform-intel-wmi-sbl-fw-update | 1 + .../testing/sysfs-platform-mellanox-bootctl | 50 ++++++---- .../ABI/testing/sysfs-platform-wilco-ec | 1 + 17 files changed, 271 insertions(+), 161 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp index 00fa04c76ff3..f5724bb5b462 100644 --- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp +++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp @@ -12,13 +12,15 @@ Description: resets. Three registers are used by the FSBL and other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}. - Usage: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 - # echo > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + Usage:: - Example: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 - # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 Users: Xilinx @@ -39,13 +41,15 @@ Description: software products: PERS_GLOB_GEN_STORAGE{4:7}. Register is reset only by a POR reset. - Usage: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 - # echo > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + Usage:: - Example: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 - # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 Users: Xilinx @@ -61,23 +65,28 @@ Description: Following are available shutdown scopes(subtypes): - subsystem: Only the APU along with all of its peripherals + subsystem: + Only the APU along with all of its peripherals not used by other processing units will be shut down. This may result in the FPD power domain being shut down provided that no other processing unit uses FPD peripherals or DRAM. - ps_only: The complete PS will be shut down, including the + ps_only: + The complete PS will be shut down, including the RPU, PMU, etc. Only the PL domain (FPGA) remains untouched. - system: The complete system/device is shut down. + system: + The complete system/device is shut down. - Usage: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope - # echo > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + Usage:: - Example: - # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope - # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope Users: Xilinx @@ -94,10 +103,13 @@ Description: system restart. Usage: - Set healthy bit - # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status - Unset healthy bit - # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + Set healthy bit:: + + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + + Unset healthy bit:: + + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status Users: Xilinx diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet index 67b1717794d8..15dfaecb2892 100644 --- a/Documentation/ABI/testing/debugfs-moxtet +++ b/Documentation/ABI/testing/debugfs-moxtet @@ -5,10 +5,16 @@ Contact: Marek Behún Description: (R) Read input from the shift registers, in hexadecimal. Returns N+1 bytes, where N is the number of Moxtet connected modules. The first byte is from the CPU board itself. - Example: 101214 - 10: CPU board with SD card - 12: 2 = PCIe module, 1 = IRQ not active - 14: 4 = Peridot module, 1 = IRQ not active + + Example:: + + 101214 + + == ======================================= + 10 CPU board with SD card + 12 2 = PCIe module, 1 = IRQ not active + 14 4 = Peridot module, 1 = IRQ not active + == ======================================= What: /sys/kernel/debug/moxtet/output Date: March 2019 @@ -17,7 +23,13 @@ Contact: Marek Behún Description: (RW) Read last written value to the shift registers, in hexadecimal, or write values to the shift registers, also in hexadecimal. - Example: 0102 - 01: 01 was last written, or is to be written, to the - first module's shift register - 02: the same for second module + + Example:: + + 0102 + + == ================================================ + 01 01 was last written, or is to be written, to the + first module's shift register + 02 the same for second module + == ================================================ diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm index 2b3255ee68fd..c8f7dadd591c 100644 --- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm @@ -2,8 +2,10 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign Date: Jun 2020 KernelVersion: 5.8 Contact: Marek Behún -Description: (W) Message to sign with the ECDSA private key stored in +Description: (W) + Message to sign with the ECDSA private key stored in device's OTP. The message must be exactly 64 bytes (since this is intended for SHA-512 hashes). - (R) The resulting signature, 136 bytes. This contains the R and + (R) + The resulting signature, 136 bytes. This contains the R and S values of the ECDSA signature, both in big-endian format. diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme index c9278a3b3df1..63a32ddcb95e 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme @@ -8,13 +8,13 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: event = "config:0-11" - event ID evtype = "config:12-15" - event type portid = "config:16-23" - event source - For example, + For example:: fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff" @@ -40,11 +40,11 @@ Description: Read-only. Attribute group to describe performance monitoring All supported performance monitoring events are listed below. - Basic events (evtype=0x00) + Basic events (evtype=0x00):: clock = "event=0x00,evtype=0x00,portid=0xff" - Cache events (evtype=0x01) + Cache events (evtype=0x01):: cache_read_hit = "event=0x00,evtype=0x01,portid=0xff" cache_read_miss = "event=0x01,evtype=0x01,portid=0xff" @@ -59,7 +59,7 @@ Description: Read-only. Attribute group to describe performance monitoring cache_rx_req_stall = "event=0x09,evtype=0x01,portid=0xff" cache_eviction = "event=0x0a,evtype=0x01,portid=0xff" - Fabric events (evtype=0x02) + Fabric events (evtype=0x02):: fab_pcie0_read = "event=0x00,evtype=0x02,portid=0xff" fab_pcie0_write = "event=0x01,evtype=0x02,portid=0xff" @@ -78,7 +78,7 @@ Description: Read-only. Attribute group to describe performance monitoring fab_port_mmio_read = "event=0x06,evtype=0x02,portid=?" fab_port_mmio_write = "event=0x07,evtype=0x02,portid=?" - VTD events (evtype=0x03) + VTD events (evtype=0x03):: vtd_port_read_transaction = "event=0x00,evtype=0x03,portid=?" vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?" @@ -88,7 +88,7 @@ Description: Read-only. Attribute group to describe performance monitoring vtd_port_devtlb_2m_fill = "event=0x05,evtype=0x03,portid=?" vtd_port_devtlb_1g_fill = "event=0x06,evtype=0x03,portid=?" - VTD SIP events (evtype=0x04) + VTD SIP events (evtype=0x04):: vtd_sip_iotlb_4k_hit = "event=0x00,evtype=0x04,portid=0xff" vtd_sip_iotlb_2m_hit = "event=0x01,evtype=0x04,portid=0xff" diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most index ec0a603d804b..38cc03e408e7 100644 --- a/Documentation/ABI/testing/sysfs-bus-most +++ b/Documentation/ABI/testing/sysfs-bus-most @@ -235,7 +235,8 @@ KernelVersion: 4.15 Contact: Christian Gromm Description: This is to read back the configured direction of the channel. - The following strings will be accepted: + The following strings will be accepted:: + 'tx', 'rx' Users: @@ -246,7 +247,8 @@ KernelVersion: 4.15 Contact: Christian Gromm Description: This is to read back the configured data type of the channel. - The following strings will be accepted: + The following strings will be accepted:: + 'control', 'async', 'sync', diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index deefffb3bbe4..b8ebff4b1c4c 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -62,7 +62,8 @@ Description: driver should provide the list of available frequencies with its profile. If need to reset the statistics of devfreq behavior on a specific device, enter 0(zero) to 'trans_stat' - as following: + as following:: + echo 0 > /sys/class/devfreq/.../trans_stat What: /sys/class/devfreq/.../userspace/set_freq @@ -117,6 +118,7 @@ Description: This work timer is used by devfreq workqueue in order to monitor the device status such as utilization. The user can change the work timer on runtime according to their demand - as following: + as following:: + echo deferrable > /sys/class/devfreq/.../timer echo delayed > /sys/class/devfreq/.../timer diff --git a/Documentation/ABI/testing/sysfs-class-ocxl b/Documentation/ABI/testing/sysfs-class-ocxl index bf33f4fda58f..847a7edc3113 100644 --- a/Documentation/ABI/testing/sysfs-class-ocxl +++ b/Documentation/ABI/testing/sysfs-class-ocxl @@ -13,8 +13,8 @@ Description: read only where: ==== =============================================== - n: number of currently active contexts, for debug - max: maximum number of contexts supported by the AFU + n number of currently active contexts, for debug + max maximum number of contexts supported by the AFU ==== =============================================== What: /sys/class/ocxl//pp_mmio_size @@ -43,7 +43,9 @@ Contact: linuxppc-dev@lists.ozlabs.org Description: read/write Control whether the FPGA is reloaded on a link reset. Enabled through a vendor-specific logic block on the FPGA. - 0 Do not reload FPGA image from flash - 1 Reload FPGA image from flash - unavailable - The device does not support this capability + + =========== =========================================== + 0 Do not reload FPGA image from flash + 1 Reload FPGA image from flash + unavailable The device does not support this capability + =========== =========================================== diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco index 84fde1d0ada0..82af180fcaab 100644 --- a/Documentation/ABI/testing/sysfs-class-power-wilco +++ b/Documentation/ABI/testing/sysfs-class-power-wilco @@ -4,17 +4,23 @@ KernelVersion: 5.2 Description: What charging algorithm to use: - Standard: Fully charges battery at a standard rate. - Adaptive: Battery settings adaptively optimized based on + Standard: + Fully charges battery at a standard rate. + Adaptive: + Battery settings adaptively optimized based on typical battery usage pattern. - Fast: Battery charges over a shorter period. - Trickle: Extends battery lifespan, intended for users who + Fast: + Battery charges over a shorter period. + Trickle: + Extends battery lifespan, intended for users who primarily use their Chromebook while connected to AC. - Custom: A low and high threshold percentage is specified. + Custom: + A low and high threshold percentage is specified. Charging begins when level drops below charge_control_start_threshold, and ceases when level is above charge_control_end_threshold. - Long Life: Customized charge rate for last longer battery life. + Long Life: + Customized charge rate for last longer battery life. On Wilco device this mode is pre-configured in the factory through EC's private PID. Swiching to a different mode will be denied by Wilco EC when Long Life mode is enabled. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client index c084f203b41e..00c0286733d4 100644 --- a/Documentation/ABI/testing/sysfs-class-rnbd-client +++ b/Documentation/ABI/testing/sysfs-class-rnbd-client @@ -5,62 +5,70 @@ Contact: Jack Wang Danil Kipnis Usage: echo "sessname= path=<[srcaddr,]dstaddr> - > [path=<[srcaddr,]dstaddr>] device_path= - > [access_mode=] > map_device - > - > addr ::= [ ip: | ip: | gid: ] + # cat /sys/class/rnbd-client/ctl/map_device + + > Usage: echo "sessname= path=<[srcaddr,]dstaddr> + > [path=<[srcaddr,]dstaddr>] device_path= + > [access_mode=] > map_device + > + > addr ::= [ ip: | ip: | gid: ] What: /sys/class/rnbd-client/ctl/map_device Date: Feb 2020 KernelVersion: 5.7 Contact: Jack Wang Danil Kipnis -Description: Expected format is the following: +Description: Expected format is the following:: - sessname= - path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] - device_path= - [access_mode=] + sessname= + path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] + device_path= + [access_mode=] Where: - sessname: accepts a string not bigger than 256 chars, which identifies - a given session on the client and on the server. - I.e. "clt_hostname-srv_hostname" could be a natural choice. + sessname: + accepts a string not bigger than 256 chars, which identifies + a given session on the client and on the server. + I.e. "clt_hostname-srv_hostname" could be a natural choice. - path: describes a connection between the client and the server by - specifying destination and, when required, the source address. - The addresses are to be provided in the following format: + path: + describes a connection between the client and the server by + specifying destination and, when required, the source address. + The addresses are to be provided in the following format:: - ip: - ip: - gid: + ip: + ip: + gid: - for example: + for example:: + + path=ip:10.0.0.66 - path=ip:10.0.0.66 The single addr is treated as the destination. The connection will be established to this server from any client IP address. - path=ip:10.0.0.66,ip:10.0.1.66 + :: + + path=ip:10.0.0.66,ip:10.0.1.66 + First addr is the source address and the second is the destination. If multiple "path=" options are specified multiple connection will be established and data will be sent according to the selected multipath policy (see RTRS mp_policy sysfs entry description). - device_path: Path to the block device on the server side. Path is specified - relative to the directory on server side configured in the - 'dev_search_path' module parameter of the rnbd_server. - The rnbd_server prepends the received from client - with and tries to open the - / block device. On success, - a /dev/rnbd device file, a /sys/block/rnbd_client/rnbd/ - directory and an entry in /sys/class/rnbd-client/ctl/devices - will be created. + device_path: + Path to the block device on the server side. Path is specified + relative to the directory on server side configured in the + 'dev_search_path' module parameter of the rnbd_server. + The rnbd_server prepends the received from client + with and tries to open the + / block device. On success, + a /dev/rnbd device file, a /sys/block/rnbd_client/rnbd/ + directory and an entry in /sys/class/rnbd-client/ctl/devices + will be created. If 'dev_search_path' contains '%SESSNAME%', then each session can have different devices namespace, e.g. server was configured with @@ -68,11 +76,12 @@ Description: Expected format is the following: client has this string "sessname=blya device_path=sda", then server will try to open: /run/rnbd-devs/blya/sda. - access_mode: the access_mode parameter specifies if the device is to be - mapped as "ro" read-only or "rw" read-write. The server allows - a device to be exported in rw mode only once. The "migration" - access mode has to be specified if a second mapping in read-write - mode is desired. + access_mode: + the access_mode parameter specifies if the device is to be + mapped as "ro" read-only or "rw" read-write. The server allows + a device to be exported in rw mode only once. The "migration" + access mode has to be specified if a second mapping in read-write + mode is desired. By default "rw" is used. @@ -91,7 +100,7 @@ Description: Expected format is the following: is the same as the device name. By extracting the last part of the path the path to the device /dev/ can be build. - o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices//dev) + * /dev/block/$(cat /sys/class/rnbd-client/ctl/devices//dev) How to find the of the device is described on the next section. @@ -106,6 +115,6 @@ Description: For each device mapped on the client a new symbolic link is created The of each device is created as follows: - If the 'device_path' provided during mapping contains slashes ("/"), - they are replaced by exclamation mark ("!") and used as as the - . Otherwise, the will be the same as the - "device_path" provided. + they are replaced by exclamation mark ("!") and used as as the + . Otherwise, the will be the same as the + "device_path" provided. diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client index e7e718db8941..0f7165aab251 100644 --- a/Documentation/ABI/testing/sysfs-class-rtrs-client +++ b/Documentation/ABI/testing/sysfs-class-rtrs-client @@ -10,10 +10,10 @@ Date: Feb 2020 KernelVersion: 5.7 Contact: Jack Wang Danil Kipnis Description: RW, adds a new path (connection) to an existing session. Expected format is the - following: + following:: - <[source addr,]destination addr> - *addr ::= [ ip: | gid: ] + <[source addr,]destination addr> + *addr ::= [ ip: | gid: ] What: /sys/class/rtrs-client//max_reconnect_attempts Date: Feb 2020 @@ -29,10 +29,10 @@ Contact: Jack Wang Danil Kipnis /paths/ Date: Feb 2020 @@ -109,8 +109,11 @@ Description: RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's not the case, the processing of an I/O response could be processed on a different CPU than where it was originally submitted. This file shows how many interrupts where generated on a non expected CPU. - "from:" is the CPU on which the IRQ was expected, but not generated. - "to:" is the CPU on which the IRQ was generated, but not expected. + + "from:" + is the CPU on which the IRQ was expected, but not generated. + "to:" + is the CPU on which the IRQ was generated, but not expected. What: /sys/class/rtrs-client//paths//stats/reconnects Date: Feb 2020 @@ -125,7 +128,7 @@ Date: Feb 2020 KernelVersion: 5.7 Contact: Jack Wang Danil Kipnis Description: Contains statistics regarding rdma operations and inflight operations. - The output consists of 6 values: + The output consists of 6 values:: - \ - + \ + diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu index a8daceb4a956..ee253b033280 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu @@ -102,6 +102,8 @@ Description: b[15:0] inform firmware the current software execution stage. + + == =========================================== 0 the first stage bootloader didn't run or didn't reach the point of launching second stage bootloader. @@ -111,21 +113,29 @@ Description: 2 both first and second stage bootloader ran and the operating system launch was attempted. + == =========================================== b[16] + == =========================================== 1 firmware to reset current image retry counter. 0 no action. + == =========================================== b[17] + == =========================================== 1 firmware to clear RSU log 0 no action. + == =========================================== b[18] this is negative logic + + == =========================================== 1 no action 0 firmware record the notify code defined in b[15:0]. + == =========================================== What: /sys/devices/platform/stratix10-rsu.0/dcmf0 Date: June 2020 diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm index 8873bbb075cb..6a37dc33ffdb 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_therm +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm @@ -22,8 +22,10 @@ Description: device data to its embedded EEPROM, either restore data embedded in device EEPROM. Be aware that devices support limited EEPROM writing cycles (typical 50k) + * 'save': save device RAM to EEPROM * 'restore': restore EEPROM data in device RAM + Users: any user space application which wants to communicate with w1_term device @@ -33,9 +35,11 @@ Date: May 2020 Contact: Akira Shimahara Description: (RO) return the power status by asking the device + * '0': device parasite powered * '1': device externally powered * '-xx': xx is kernel error when reading power status + Users: any user space application which wants to communicate with w1_term device @@ -49,10 +53,12 @@ Description: will be changed only in device RAM, so it will be cleared when power is lost. Trigger a 'save' to EEPROM command to keep values after power-on. Read or write are : + * '9..14': device resolution in bit - or resolution to set in bit + or resolution to set in bit * '-xx': xx is kernel error when reading the resolution * Anything else: do nothing + Some DS18B20 clones are fixed in 12-bit resolution, so the actual resolution is read back from the chip and verified. Error is reported if the results differ. @@ -65,16 +71,18 @@ Date: May 2020 Contact: Akira Shimahara Description: (RO) return the temperature in 1/1000 degC. + * If a bulk read has been triggered, it will directly - return the temperature computed when the bulk read - occurred, if available. If not yet available, nothing - is returned (a debug kernel message is sent), you - should retry later on. + return the temperature computed when the bulk read + occurred, if available. If not yet available, nothing + is returned (a debug kernel message is sent), you + should retry later on. * If no bulk read has been triggered, it will trigger - a conversion and send the result. Note that the - conversion duration depend on the resolution (if - device support this feature). It takes 94ms in 9bits - resolution, 750ms for 12bits. + a conversion and send the result. Note that the + conversion duration depend on the resolution (if + device support this feature). It takes 94ms in 9bits + resolution, 750ms for 12bits. + Users: any user space application which wants to communicate with w1_term device @@ -86,12 +94,14 @@ Description: (RW) return the temperature in 1/1000 degC. *read*: return 2 lines with the hexa output data sent on the bus, return the CRC check and temperature in 1/1000 degC - *write* : + *write*: + * '0' : save the 2 or 3 bytes to the device EEPROM - (i.e. TH, TL and config register) + (i.e. TH, TL and config register) * '9..14' : set the device resolution in RAM - (if supported) + (if supported) * Anything else: do nothing + refer to Documentation/w1/slaves/w1_therm.rst for detailed information. Users: any user space application which wants to communicate with @@ -103,14 +113,21 @@ Date: May 2020 Contact: Akira Shimahara Description: (RW) trigger a bulk read conversion. read the status + *read*: - * '-1': conversion in progress on at least 1 sensor - * '1' : conversion complete but at least one sensor + * '-1': + conversion in progress on at least 1 sensor + * '1' : + conversion complete but at least one sensor value has not been read yet - * '0' : no bulk operation. Reading temperature will + * '0' : + no bulk operation. Reading temperature will trigger a conversion on each device - *write*: 'trigger': trigger a bulk read on all supporting + + *write*: + 'trigger': trigger a bulk read on all supporting devices on the bus + Note that if a bulk read is sent but one sensor is not read immediately, the next access to temperature on this device will return the temperature measured at the time of issue @@ -128,14 +145,19 @@ Description: reset to default (datasheet) conversion time for a new resolution. - *read*: Actual conversion time in milliseconds. *write*: - '0': Set the default conversion time from the datasheet. - '1': Measure and set the conversion time. Make a single + *read*: + Actual conversion time in milliseconds. + + *write*: + * '0': + Set the default conversion time from the datasheet. + * '1': + Measure and set the conversion time. Make a single temperature conversion, measure an actual value. Increase it by 20% for temperature range. A new conversion time can be obtained by reading this same attribute. - other positive value: + * other positive value: Set the conversion time in milliseconds. Users: An application using the w1_term device @@ -148,16 +170,21 @@ Description: (RW) Control optional driver settings. Bit masks to read/write (bitwise OR): - 1: Enable check for conversion success. If byte 6 of + == ============================================================ + 1 Enable check for conversion success. If byte 6 of scratchpad memory is 0xC after conversion, and temperature reads 85.00 (powerup value) or 127.94 (insufficient power) - return a conversion error. - 2: Enable poll for conversion completion. Generate read cycles + 2 Enable poll for conversion completion. Generate read cycles after the conversion start and wait for 1's. In parasite power mode this feature is not available. + == ============================================================ - *read*: Currently selected features. - *write*: Select features. + *read*: + Currently selected features. + + *write*: + Select features. Users: An application using the w1_term device diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme index 3683cb1cdc3d..d6ab34e81b9b 100644 --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme @@ -113,8 +113,11 @@ KernelVersion: 5.5 Contact: Wu Hao Description: Read-Only. Read this file to get the name of hwmon device, it supports values: - 'dfl_fme_thermal' - thermal hwmon device name - 'dfl_fme_power' - power hwmon device name + + ================= ========================= + 'dfl_fme_thermal' thermal hwmon device name + 'dfl_fme_power' power hwmon device name + ================= ========================= What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input Date: October 2019 @@ -169,8 +172,11 @@ KernelVersion: 5.5 Contact: Wu Hao Description: Read-Only. Read this file to get the policy of hardware threshold1 (see 'temp1_max'). It only supports two values (policies): - 0 - AP2 state (90% throttling) - 1 - AP1 state (50% throttling) + + == ========================== + 0 AP2 state (90% throttling) + 1 AP1 state (50% throttling) + == ========================== What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input Date: October 2019 diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf index 2cbc660d163b..141834342a4d 100644 --- a/Documentation/ABI/testing/sysfs-platform-dptf +++ b/Documentation/ABI/testing/sysfs-platform-dptf @@ -27,12 +27,15 @@ KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Display the platform power source + + ========= ============================ bits[3:0] Current power source - 0x00 = DC - 0x01 = AC - 0x02 = USB - 0x03 = Wireless Charger + - 0x00 = DC + - 0x01 = AC + - 0x02 = USB + - 0x03 = Wireless Charger bits[7:4] Power source sequence number + ========= ============================ What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power Date: Jul, 2016 diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update index 5aa618987cad..02ae1e9bbfc8 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update @@ -8,5 +8,6 @@ Description: of 0 and userspace can signal SBL to update firmware, on next reboot, by writing a value of 1. There are two available states: + * 0 -> Skip firmware update while rebooting * 1 -> Attempt firmware update on next reboot diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index 401d202f478b..e79ca22e2f45 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -5,10 +5,13 @@ Contact: "Liming Sun " Description: The Life-cycle state of the SoC, which could be one of the following values. - Production - Production state and can be updated to secure - GA Secured - Secure chip and not able to change state - GA Non-Secured - Non-Secure chip and not able to change state - RMA - Return Merchandise Authorization + + ============== ============================================= + Production Production state and can be updated to secure + GA Secured Secure chip and not able to change state + GA Non-Secured Non-Secure chip and not able to change state + RMA Return Merchandise Authorization + ============== ============================================= What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog Date: Oct 2019 @@ -25,10 +28,13 @@ KernelVersion: 5.5 Contact: "Liming Sun " Description: The source of the boot stream for the next reset. It could be - one of the following values. - external - boot from external source (USB or PCIe) - emmc - boot from the onchip eMMC - emmc_legacy - boot from the onchip eMMC in legacy (slow) mode + one of the following values: + + =========== =============================================== + external boot from external source (USB or PCIe) + emmc boot from the onchip eMMC + emmc_legacy boot from the onchip eMMC in legacy (slow) mode + =========== =============================================== What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action Date: Oct 2019 @@ -38,11 +44,14 @@ Description: Update the source of the boot stream after next reset. It could be one of the following values and will be applied after next reset. - external - boot from external source (USB or PCIe) - emmc - boot from the onchip eMMC - emmc_legacy - boot from the onchip eMMC in legacy (slow) mode - swap_emmc - swap the primary / secondary boot partition - none - cancel the action + + =========== =============================================== + external boot from external source (USB or PCIe) + emmc boot from the onchip eMMC + emmc_legacy boot from the onchip eMMC in legacy (slow) mode + swap_emmc swap the primary / secondary boot partition + none cancel the action + =========== =============================================== What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state Date: Oct 2019 @@ -50,9 +59,12 @@ KernelVersion: 5.5 Contact: "Liming Sun " Description: The state of eFuse versions with the following values. - InUse - burnt, valid and currently in use - Used - burnt and valid - Free - not burnt and free to use - Skipped - not burnt but not free (skipped) - Wasted - burnt and invalid - Invalid - not burnt but marked as valid (error state). + + ======= =============================================== + InUse burnt, valid and currently in use + Used burnt and valid + Free not burnt and free to use + Skipped not burnt but not free (skipped) + Wasted burnt and invalid + Invalid not burnt but marked as valid (error state). + ======= =============================================== diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec index 5f60b184a5a5..4439d0644091 100644 --- a/Documentation/ABI/testing/sysfs-platform-wilco-ec +++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec @@ -39,6 +39,7 @@ Description: which affects charging via the special USB PowerShare port (marked with a small lightning bolt or battery icon) when in low power states: + - In S0, the port will always provide power. - In S0ix, if usb_charge is enabled, then power will be supplied to the port when on AC or if battery is > 50%. -- 2.26.2