Received: by 2002:a05:6a10:9e8c:0:0:0:0 with SMTP id y12csp1068897pxx; Fri, 30 Oct 2020 00:43:33 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxUfIEbYyZzibjwz4wZRnXoUgmiM7gT/B77G38WVymTMHkfVS9GtzCPdjdrsjDLluINXEXq X-Received: by 2002:aa7:cd90:: with SMTP id x16mr918259edv.302.1604043813351; Fri, 30 Oct 2020 00:43:33 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1604043813; cv=none; d=google.com; s=arc-20160816; b=uT1zvoWShaaVzOk2gNMAVusV2D021P31Ywm89/M22df7jBhD9eHrNWLnewim2epbmb 2IJqOlsM75u58Xj27HH14ekvaXP6FezfHjb7qehvYyLrgl1Q6FZjafLk2U3dr3g7g/Vs x0aT204dQ0aIApp4yzVQQUX95B/mcBREHVK54exBBbVSrshgtsvLLQnSPmoVVsQ1SStf XdQVWFdWSxUzBSoN/5Po2tIpBrT0hquWwVLY5aqjy461hX/lqmFV0oRAeSA0DORHd6lq /N0b4skzoxtoalXwe0Htl4iTGe99B1cReSpfDwU1dNnEh+PFxDKHQWxrt1Kw/lyk+88r I4Tw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=Hwo54jq0H6HUsj6Z3zjfhpgtVPWVm+31l/dLuYI37OM=; b=RzJCk0xM1lt7xLBtWd8N4Fc0xbtKKXri0vb/JuZH7gPEIl0mRxp05BSQ5fNkPpBEAd fo1Mu7keESZKG2j4/LUfRVhtYwOSM0HO4wA5PT2Gkkk6rJSOh4ItXjDalZHIn4GkTHc3 GGQHgWWiSo4KGvyBEKUL6mresOaLpfqASHhpUwzniehuiCJpftnTajfG2RkS8IXrMvfH 9iNGcE7OA1fMg5F77Mn/JQH/ptV++wni/0BOM23x7X8JgCL3KEI6/QVXdlJSpuHKNAzU PEDRob26g7V8LQyXSaqjeEm6plDA8klFJjYfheCVtc0bkE288zyq9Q76dWsXqprUp/gl WPoQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=FxoQ9Nkc; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id g27si3560753ejd.639.2020.10.30.00.43.09; Fri, 30 Oct 2020 00:43:33 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=FxoQ9Nkc; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726198AbgJ3HlZ (ORCPT + 99 others); Fri, 30 Oct 2020 03:41:25 -0400 Received: from mail.kernel.org ([198.145.29.99]:51962 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726133AbgJ3HlT (ORCPT ); Fri, 30 Oct 2020 03:41:19 -0400 Received: from mail.kernel.org (ip5f5ad5bb.dynamic.kabel-deutschland.de [95.90.213.187]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 1C37522228; Fri, 30 Oct 2020 07:41:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1604043667; bh=aIKjlDhXRJaKOVxLaJI9RrJCRC/fqtfPsnVsn2Qk648=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=FxoQ9NkcseV7SvoQHxhHnHHXSz61xdEUJSR1cbi50jq0nSEIbzBkrCK68mJ4qGAOu YKNDwfXYW522np/mGbzeQKigQDzpemzQc9iqf9UulqP9KeWhN/wyXotimYddtngS1D j4KWYSJmNPSLhLVAuzYNz9XceAs+zvmgT6+VMvUw= Received: from mchehab by mail.kernel.org with local (Exim 4.94) (envelope-from ) id 1kYP1x-004Ogg-Ku; Fri, 30 Oct 2020 08:41:01 +0100 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , "Gautham R. Shenoy" , "Jonathan Corbet" , =?UTF-8?q?Marek=20Beh=C3=BAn?= , =?UTF-8?q?Marek=20Marczykowski-G=C3=B3recki?= , =?UTF-8?q?Pali=20Roh=C3=A1r?= , "Peter Zijlstra (Intel)" , "Rafael J. Wysocki" , =?UTF-8?q?Roger=20Pau=20Monn=C3=A9?= , Alexander Antonov , Alexander Shishkin , Alexandre Torgue , Andreas Klinger , Andrew Donnellan , Andrew Lunn , Andy Shevchenko , Anton Vorontsov , Asutosh Das , Bart Van Assche , Bartosz Golaszewski , Bjorn Andersson , Bjorn Helgaas , Boris Brezillon , Boris Ostrovsky , Cezary Rojewski , Chao Yu , Christian Gromm , Colin Cross , Dan Murphy , Dan Williams , Daniel Thompson , Danil Kipnis , David Sterba , Dmitry Torokhov , Dongsheng Yang , Enric Balletbo i Serra , Florian Fainelli , Frederic Barrat , Greg Kroah-Hartman , Guenter Roeck , Hanjun Guo , Hans Verkuil , Heiner Kallweit , Ilya Dryomov , Jack Wang , Jaegeuk Kim , Jarkko Sakkinen , Jason Gunthorpe , Jens Axboe , Jerry Snitselaar , Jingoo Han , Johan Hovold , Jonas Meurer , Jonathan Cameron , Kajol Jain , Kees Cook , Konstantin Khlebnikov , Kranthi Kuntala , Lars-Peter Clausen , Lee Jones , Len Brown , Linus Walleij , Mario Limonciello , Mark Gross , Mathieu Poirier , Maxime Coquelin , Michael Ellerman , Michael Hennerich , Mika Westerberg , Mike Leach , Oded Gabbay , Ohad Ben-Cohen , Oleh Kravchenko , Pavel Machek , Pawan Gupta , Peter Chen , Peter Meerwald-Stadler , PrasannaKumar Muralidharan , Rasmus Villemoes , Roman Sudarikov , Russell King , Samuel Thibault , Saravana Kannan , Sebastian Reichel , Srinivas Kandagatla , Stefan Achatz , Suzuki K Poulose , Thomas Gleixner , Tom Rix , Tony Luck , Vaibhav Jain , Vineela Tummalapalli , Wu Hao , ceph-devel@vger.kernel.org, coresight@lists.linaro.org, dri-devel@lists.freedesktop.org, linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-f2fs-devel@lists.sourceforge.net, linux-fpga@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i3c@lists.infradead.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-pm@vger.kernel.org, linux-remoteproc@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linuxppc-dev@lists.ozlabs.org, netdev@vger.kernel.org, Jonathan Cameron Subject: [PATCH v2 31/39] docs: ABI: cleanup several ABI documents Date: Fri, 30 Oct 2020 08:40:50 +0100 Message-Id: <5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org> X-Mailer: git-send-email 2.26.2 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: Mauro Carvalho Chehab Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Acked-by: Jonathan Cameron #for IIO Reviewed-by: Tom Rix # for fpga-manager Reviewed-By: Kajol Jain # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Oded Gabbay # for Habanalabs Acked-by: Vaibhav Jain # for sysfs-bus-papr-pmem Signed-off-by: Mauro Carvalho Chehab --- Documentation/ABI/obsolete/sysfs-class-dax | 8 +- .../ABI/obsolete/sysfs-driver-hid-roccat-pyra | 3 + Documentation/ABI/removed/devfs | 1 + Documentation/ABI/removed/raw1394 | 1 + Documentation/ABI/removed/sysfs-class-rfkill | 2 +- Documentation/ABI/removed/video1394 | 1 + Documentation/ABI/stable/firewire-cdev | 63 ++--- Documentation/ABI/stable/sysfs-acpi-pmprofile | 4 +- Documentation/ABI/stable/sysfs-bus-w1 | 1 + Documentation/ABI/stable/sysfs-class-tpm | 4 +- Documentation/ABI/stable/sysfs-driver-speakup | 4 + Documentation/ABI/testing/configfs-most | 135 +++++++---- .../ABI/testing/configfs-usb-gadget-ecm | 12 +- .../ABI/testing/configfs-usb-gadget-eem | 10 +- .../ABI/testing/configfs-usb-gadget-loopback | 6 +- .../testing/configfs-usb-gadget-mass-storage | 18 +- .../ABI/testing/configfs-usb-gadget-midi | 14 +- .../ABI/testing/configfs-usb-gadget-printer | 6 +- .../testing/configfs-usb-gadget-sourcesink | 18 +- .../ABI/testing/configfs-usb-gadget-subset | 10 +- .../ABI/testing/configfs-usb-gadget-uac2 | 14 +- .../ABI/testing/configfs-usb-gadget-uvc | 2 +- .../ABI/testing/debugfs-cec-error-inj | 2 +- .../ABI/testing/debugfs-driver-habanalabs | 12 +- .../ABI/testing/debugfs-pfo-nx-crypto | 28 +-- Documentation/ABI/testing/debugfs-pktcdvd | 2 +- .../ABI/testing/debugfs-turris-mox-rwtm | 10 +- Documentation/ABI/testing/debugfs-wilco-ec | 21 +- Documentation/ABI/testing/dell-smbios-wmi | 32 +-- Documentation/ABI/testing/gpio-cdev | 13 +- Documentation/ABI/testing/procfs-diskstats | 6 +- Documentation/ABI/testing/procfs-smaps_rollup | 48 ++-- Documentation/ABI/testing/pstore | 19 +- Documentation/ABI/testing/sysfs-block-rnbd | 4 +- Documentation/ABI/testing/sysfs-bus-acpi | 1 + .../testing/sysfs-bus-coresight-devices-etb10 | 5 +- Documentation/ABI/testing/sysfs-bus-css | 3 + Documentation/ABI/testing/sysfs-bus-dfl | 2 + .../sysfs-bus-event_source-devices-hv_24x7 | 6 +- .../sysfs-bus-event_source-devices-hv_gpci | 7 +- Documentation/ABI/testing/sysfs-bus-fcoe | 68 ++++-- Documentation/ABI/testing/sysfs-bus-fsl-mc | 12 +- .../ABI/testing/sysfs-bus-i2c-devices-fsa9480 | 26 +- Documentation/ABI/testing/sysfs-bus-i3c | 2 + Documentation/ABI/testing/sysfs-bus-iio | 19 +- .../ABI/testing/sysfs-bus-iio-adc-hi8435 | 5 + .../ABI/testing/sysfs-bus-iio-adc-stm32 | 3 + .../ABI/testing/sysfs-bus-iio-distance-srf08 | 7 +- .../testing/sysfs-bus-iio-frequency-ad9523 | 2 + .../testing/sysfs-bus-iio-frequency-adf4371 | 10 +- .../ABI/testing/sysfs-bus-iio-health-afe440x | 12 +- .../ABI/testing/sysfs-bus-iio-light-isl29018 | 6 +- .../testing/sysfs-bus-intel_th-devices-gth | 11 +- Documentation/ABI/testing/sysfs-bus-papr-pmem | 23 +- Documentation/ABI/testing/sysfs-bus-pci | 22 +- .../ABI/testing/sysfs-bus-pci-devices-catpt | 1 + .../testing/sysfs-bus-pci-drivers-ehci_hcd | 4 +- Documentation/ABI/testing/sysfs-bus-rbd | 37 ++- Documentation/ABI/testing/sysfs-bus-siox | 3 + .../ABI/testing/sysfs-bus-thunderbolt | 18 +- Documentation/ABI/testing/sysfs-bus-usb | 2 + .../sysfs-class-backlight-driver-lm3533 | 26 +- Documentation/ABI/testing/sysfs-class-bdi | 1 - .../ABI/testing/sysfs-class-chromeos | 15 +- Documentation/ABI/testing/sysfs-class-cxl | 8 +- Documentation/ABI/testing/sysfs-class-devlink | 30 ++- Documentation/ABI/testing/sysfs-class-extcon | 34 +-- .../ABI/testing/sysfs-class-fpga-manager | 5 +- Documentation/ABI/testing/sysfs-class-gnss | 2 + Documentation/ABI/testing/sysfs-class-led | 1 + .../testing/sysfs-class-led-driver-el15203000 | 30 +-- .../ABI/testing/sysfs-class-led-driver-lm3533 | 44 ++-- .../ABI/testing/sysfs-class-led-flash | 27 ++- .../testing/sysfs-class-led-trigger-netdev | 7 + .../testing/sysfs-class-led-trigger-usbport | 1 + .../ABI/testing/sysfs-class-leds-gt683r | 8 +- Documentation/ABI/testing/sysfs-class-net | 61 +++-- .../ABI/testing/sysfs-class-net-cdc_ncm | 6 +- .../ABI/testing/sysfs-class-net-phydev | 2 + Documentation/ABI/testing/sysfs-class-pktcdvd | 36 +-- Documentation/ABI/testing/sysfs-class-power | 12 +- .../ABI/testing/sysfs-class-power-mp2629 | 1 + .../ABI/testing/sysfs-class-power-twl4030 | 4 +- Documentation/ABI/testing/sysfs-class-rapidio | 46 ++-- .../ABI/testing/sysfs-class-regulator | 36 +-- .../ABI/testing/sysfs-class-remoteproc | 14 +- ...ysfs-class-rtc-rtc0-device-rtc_calibration | 1 + Documentation/ABI/testing/sysfs-class-uwb_rc | 13 +- .../ABI/testing/sysfs-class-watchdog | 7 +- Documentation/ABI/testing/sysfs-dev | 7 +- .../ABI/testing/sysfs-devices-mapping | 41 ++-- .../ABI/testing/sysfs-devices-memory | 15 +- .../sysfs-devices-platform-_UDC_-gadget | 10 +- .../ABI/testing/sysfs-devices-platform-ipmi | 52 ++-- .../ABI/testing/sysfs-devices-system-cpu | 4 +- .../ABI/testing/sysfs-driver-hid-lenovo | 10 + .../ABI/testing/sysfs-driver-hid-ntrig | 13 +- .../ABI/testing/sysfs-driver-hid-roccat-kone | 19 ++ .../ABI/testing/sysfs-driver-hid-wiimote | 1 + .../ABI/testing/sysfs-driver-input-exc3000 | 2 + .../ABI/testing/sysfs-driver-jz4780-efuse | 6 +- .../ABI/testing/sysfs-driver-pciback | 6 +- Documentation/ABI/testing/sysfs-driver-ufs | 228 ++++++++++++++---- .../ABI/testing/sysfs-driver-w1_ds28e17 | 3 + Documentation/ABI/testing/sysfs-firmware-acpi | 16 +- .../ABI/testing/sysfs-firmware-efi-esrt | 28 ++- .../testing/sysfs-firmware-efi-runtime-map | 14 +- .../ABI/testing/sysfs-firmware-qemu_fw_cfg | 20 +- Documentation/ABI/testing/sysfs-firmware-sfi | 6 +- .../ABI/testing/sysfs-firmware-sgi_uv | 6 +- Documentation/ABI/testing/sysfs-fs-f2fs | 48 ++-- Documentation/ABI/testing/sysfs-kernel-mm-ksm | 5 +- Documentation/ABI/testing/sysfs-kernel-slab | 3 + Documentation/ABI/testing/sysfs-module | 17 +- .../ABI/testing/sysfs-platform-dell-laptop | 10 +- .../ABI/testing/sysfs-platform-dell-smbios | 4 +- .../testing/sysfs-platform-i2c-demux-pinctrl | 4 +- Documentation/ABI/testing/sysfs-platform-kim | 1 + .../testing/sysfs-platform-phy-rcar-gen3-usb2 | 10 +- .../ABI/testing/sysfs-platform-renesas_usb3 | 10 +- Documentation/ABI/testing/sysfs-power | 21 +- Documentation/ABI/testing/sysfs-profiling | 2 +- Documentation/ABI/testing/sysfs-wusb_cbaf | 3 +- Documentation/ABI/testing/usb-charger-uevent | 82 ++++--- Documentation/ABI/testing/usb-uevent | 32 +-- scripts/get_abi.pl | 2 - 126 files changed, 1323 insertions(+), 767 deletions(-) diff --git a/Documentation/ABI/obsolete/sysfs-class-dax b/Documentation/ABI/obsolete/sysfs-class-dax index 2cb9fc5e8bd1..0faf1354cd05 100644 --- a/Documentation/ABI/obsolete/sysfs-class-dax +++ b/Documentation/ABI/obsolete/sysfs-class-dax @@ -8,11 +8,11 @@ Description: Device DAX is the device-centric analogue of Filesystem system. Device DAX is strict, precise and predictable. Specifically this interface: - 1/ Guarantees fault granularity with respect to a given - page size (pte, pmd, or pud) set at configuration time. + 1. Guarantees fault granularity with respect to a given + page size (pte, pmd, or pud) set at configuration time. - 2/ Enforces deterministic behavior by being strict about - what fault scenarios are supported. + 2. Enforces deterministic behavior by being strict about + what fault scenarios are supported. The /sys/class/dax/ interface enumerates all the device-dax instances in the system. The ABI is diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra index 5d41ebadf15e..66545c587a64 100644 --- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra @@ -7,10 +7,13 @@ Description: It is possible to switch the cpi setting of the mouse with the setting reported by the mouse. This number has to be further processed to receive the real dpi value: + ===== ==== VALUE DPI + ===== ==== 1 400 2 800 4 1600 + ===== ==== This file is readonly. Has never been used. If bookkeeping is done, it's done in userland tools. diff --git a/Documentation/ABI/removed/devfs b/Documentation/ABI/removed/devfs index 0020c49933c4..24fb35adf277 100644 --- a/Documentation/ABI/removed/devfs +++ b/Documentation/ABI/removed/devfs @@ -5,6 +5,7 @@ Description: devfs has been unmaintained for a number of years, has unfixable races, contains a naming policy within the kernel that is against the LSB, and can be replaced by using udev. + The files fs/devfs/*, include/linux/devfs_fs*.h were removed, along with the assorted devfs function calls throughout the kernel tree. diff --git a/Documentation/ABI/removed/raw1394 b/Documentation/ABI/removed/raw1394 index ec333e676322..9ec7ec493920 100644 --- a/Documentation/ABI/removed/raw1394 +++ b/Documentation/ABI/removed/raw1394 @@ -7,6 +7,7 @@ Description: to implement sensible device security policies, and its low level of abstraction that required userspace clients to duplicate much of the kernel's ieee1394 core functionality. + Replaced by /dev/fw*, i.e. the ABI of firewire-core. diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill index 9c08c7f98ffb..f25174eafd55 100644 --- a/Documentation/ABI/removed/sysfs-class-rfkill +++ b/Documentation/ABI/removed/sysfs-class-rfkill @@ -10,4 +10,4 @@ Description: This file was deprecated because there no longer was a way to claim just control over a single rfkill instance. This file was scheduled to be removed in 2012, and was removed in 2016. -Values: 0: Kernel handles events +Values: 0: Kernel handles events diff --git a/Documentation/ABI/removed/video1394 b/Documentation/ABI/removed/video1394 index c39c25aee77b..1905d35a6619 100644 --- a/Documentation/ABI/removed/video1394 +++ b/Documentation/ABI/removed/video1394 @@ -8,6 +8,7 @@ Description: performance issues in its first generation. Any video1394 user had to use raw1394 + libraw1394 too because video1394 did not provide asynchronous I/O for device discovery and configuration. + Replaced by /dev/fw*, i.e. the ABI of firewire-core. diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev index c9e8ff026154..261f85b13154 100644 --- a/Documentation/ABI/stable/firewire-cdev +++ b/Documentation/ABI/stable/firewire-cdev @@ -16,6 +16,7 @@ Description: different scope: - The 1394 node which is associated with the file: + - Asynchronous request transmission - Get the Configuration ROM - Query node ID @@ -23,6 +24,7 @@ Description: and local node - The 1394 bus (i.e. "card") to which the node is attached to: + - Isochronous stream transmission and reception - Asynchronous stream transmission and reception - Asynchronous broadcast request transmission @@ -35,6 +37,7 @@ Description: - Bus reset initiation, bus reset event reception - All 1394 buses: + - Allocation of IEEE 1212 address ranges on the local link layers, reception of inbound requests to such an address range, asynchronous response transmission @@ -59,50 +62,50 @@ Description: The following file operations are supported: open(2) - Currently the only useful flags are O_RDWR. + Currently the only useful flags are O_RDWR. ioctl(2) - Initiate various actions. Some take immediate effect, others - are performed asynchronously while or after the ioctl returns. - See the inline documentation in for - descriptions of all ioctls. + Initiate various actions. Some take immediate effect, others + are performed asynchronously while or after the ioctl returns. + See the inline documentation in for + descriptions of all ioctls. poll(2), select(2), epoll_wait(2) etc. - Watch for events to become available to be read. + Watch for events to become available to be read. read(2) - Receive various events. There are solicited events like - outbound asynchronous transaction completion or isochronous - buffer completion, and unsolicited events such as bus resets, - request reception, or PHY packet reception. Always use a read - buffer which is large enough to receive the largest event that - could ever arrive. See for descriptions - of all event types and for which ioctls affect reception of - events. + Receive various events. There are solicited events like + outbound asynchronous transaction completion or isochronous + buffer completion, and unsolicited events such as bus resets, + request reception, or PHY packet reception. Always use a read + buffer which is large enough to receive the largest event that + could ever arrive. See for descriptions + of all event types and for which ioctls affect reception of + events. mmap(2) - Allocate a DMA buffer for isochronous reception or transmission - and map it into the process address space. The arguments should - be used as follows: addr = NULL, length = the desired buffer - size, i.e. number of packets times size of largest packet, - prot = at least PROT_READ for reception and at least PROT_WRITE - for transmission, flags = MAP_SHARED, fd = the handle to the - /dev/fw*, offset = 0. + Allocate a DMA buffer for isochronous reception or transmission + and map it into the process address space. The arguments should + be used as follows: addr = NULL, length = the desired buffer + size, i.e. number of packets times size of largest packet, + prot = at least PROT_READ for reception and at least PROT_WRITE + for transmission, flags = MAP_SHARED, fd = the handle to the + /dev/fw*, offset = 0. Isochronous reception works in packet-per-buffer fashion except for multichannel reception which works in buffer-fill mode. munmap(2) - Unmap the isochronous I/O buffer from the process address space. + Unmap the isochronous I/O buffer from the process address space. close(2) - Besides stopping and freeing I/O contexts that were associated - with the file descriptor, back out any changes to the local - nodes' Configuration ROM. Deallocate isochronous channels and - bandwidth at the IRM that were marked for kernel-assisted - re- and deallocation. + Besides stopping and freeing I/O contexts that were associated + with the file descriptor, back out any changes to the local + nodes' Configuration ROM. Deallocate isochronous channels and + bandwidth at the IRM that were marked for kernel-assisted + re- and deallocation. -Users: libraw1394 - libdc1394 - libhinawa +Users: libraw1394; + libdc1394; + libhinawa; tools like linux-firewire-utils, fwhack, ... diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile index fd97d22b677f..2d6314f0e4e4 100644 --- a/Documentation/ABI/stable/sysfs-acpi-pmprofile +++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile @@ -1,8 +1,8 @@ -What: /sys/firmware/acpi/pm_profile +What: /sys/firmware/acpi/pm_profile Date: 03-Nov-2011 KernelVersion: v3.2 Contact: linux-acpi@vger.kernel.org -Description: The ACPI pm_profile sysfs interface exports the platform +Description: The ACPI pm_profile sysfs interface exports the platform power management (and performance) requirement expectations as provided by BIOS. The integer value is directly passed as retrieved from the FADT ACPI table. diff --git a/Documentation/ABI/stable/sysfs-bus-w1 b/Documentation/ABI/stable/sysfs-bus-w1 index 992dfb183ed0..5cd5e872bcae 100644 --- a/Documentation/ABI/stable/sysfs-bus-w1 +++ b/Documentation/ABI/stable/sysfs-bus-w1 @@ -6,6 +6,7 @@ Description: Bus scanning interval, microseconds component. control systems are attached/generate presence for as short as 100 ms - hence the tens-to-hundreds milliseconds scan intervals are required. + see Documentation/w1/w1-generic.rst for detailed information. Users: any user space application which wants to know bus scanning interval diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm index ec464cf7861a..91ca63ec7581 100644 --- a/Documentation/ABI/stable/sysfs-class-tpm +++ b/Documentation/ABI/stable/sysfs-class-tpm @@ -191,6 +191,6 @@ Contact: linux-integrity@vger.kernel.org Description: The "tpm_version_major" property shows the TCG spec major version implemented by the TPM device. - Example output: + Example output:: - 2 + 2 diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup index c6a32c434ce9..792f58ba327d 100644 --- a/Documentation/ABI/stable/sysfs-driver-speakup +++ b/Documentation/ABI/stable/sysfs-driver-speakup @@ -69,6 +69,7 @@ Description: Controls if typing interrupts output from speakup. With speakup if for example the say screen command is used before the entire screen is read. + With no_interrupt set to one, if the say screen command is used, and one then types on the keyboard, speakup will continue to say the whole screen regardless until @@ -215,8 +216,10 @@ Description: This file contains names for key states. Again, these are part of the help system. For instance, if you had pressed speakup + keypad 3, you would hear: "speakup keypad 3 is go to bottom edge." + The speakup key is depressed, so the name of the key state is speakup. + This part of the message comes from the states collection. What: /sys/accessibility/speakup/i18n/characters @@ -297,6 +300,7 @@ KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Controls if punctuation is spoken by speakup, or by the synthesizer. + For example, speakup speaks ">" as "greater", while the espeak synthesizer used by the soft driver speaks "greater than". Zero lets speakup speak the punctuation. One lets the diff --git a/Documentation/ABI/testing/configfs-most b/Documentation/ABI/testing/configfs-most index ed67a4d9f6d6..bc6b8bd18da4 100644 --- a/Documentation/ABI/testing/configfs-most +++ b/Documentation/ABI/testing/configfs-most @@ -15,22 +15,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -39,18 +45,23 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_video/ @@ -59,22 +70,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -83,18 +100,23 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_net/ @@ -103,22 +125,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -127,18 +155,23 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link What: /sys/kernel/config/most_sound/ @@ -147,7 +180,8 @@ KernelVersion: 5.2 Description: The attributes: - create_card write '1' to this attribute to trigger the + create_card + write '1' to this attribute to trigger the registration of the sound card with the ALSA subsystem. @@ -157,22 +191,28 @@ KernelVersion: 5.2 Description: The attributes: - buffer_size configure the buffer size for this channel + buffer_size + configure the buffer size for this channel - subbuffer_size configure the sub-buffer size for this channel + subbuffer_size + configure the sub-buffer size for this channel (needed for synchronous and isochrnous data) - num_buffers configure number of buffers used for this + num_buffers + configure number of buffers used for this channel - datatype configure type of data that will travel over + datatype + configure type of data that will travel over this channel - direction configure whether this link will be an input + direction + configure whether this link will be an input or output - dbr_size configure DBR data buffer size (this is used + dbr_size + configure DBR data buffer size (this is used for MediaLB communication only) packets_per_xact @@ -181,16 +221,21 @@ Description: transmitted via USB (this is used for USB communication only) - device name of the device the link is to be attached to + device + name of the device the link is to be attached to - channel name of the channel the link is to be attached to + channel + name of the channel the link is to be attached to - comp_params pass parameters needed by some components + comp_params + pass parameters needed by some components - create_link write '1' to this attribute to trigger the + create_link + write '1' to this attribute to trigger the creation of the link. In case of speculative configuration, the creation is post-poned until a physical device is being attached to the bus. - destroy_link write '1' to this attribute to destroy an + destroy_link + write '1' to this attribute to destroy an active link diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ecm b/Documentation/ABI/testing/configfs-usb-gadget-ecm index 0addf7704b4c..272bc1e4ce2e 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-ecm +++ b/Documentation/ABI/testing/configfs-usb-gadget-ecm @@ -4,13 +4,17 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ifname + - network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult + - queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr + - MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr + - MAC address of device's end of this Ethernet over USB link diff --git a/Documentation/ABI/testing/configfs-usb-gadget-eem b/Documentation/ABI/testing/configfs-usb-gadget-eem index a4c57158fcde..178c3d5fb647 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-eem +++ b/Documentation/ABI/testing/configfs-usb-gadget-eem @@ -4,11 +4,13 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========== ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link + ========== ============================================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback index 06beefbcf061..e6c6ba5ac7ff 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-loopback +++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback @@ -4,5 +4,7 @@ KernelVersion: 3.13 Description: The attributes: - qlen - depth of loopback queue - buflen - buffer length + ======= ======================= + qlen depth of loopback queue + buflen buffer length + ======= ======================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage index 9931fb0d63ba..c86b63a7bb43 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage +++ b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage @@ -4,12 +4,14 @@ KernelVersion: 3.13 Description: The attributes: - stall - Set to permit function to halt bulk endpoints. + =========== ============================================== + stall Set to permit function to halt bulk endpoints. Disabled on some USB devices known not to work correctly. You should set it to true. - num_buffers - Number of pipeline buffers. Valid numbers + num_buffers Number of pipeline buffers. Valid numbers are 2..4. Available only if CONFIG_USB_GADGET_DEBUG_FILES is set. + =========== ============================================== What: /config/usb-gadget/gadget/functions/mass_storage.name/lun.name Date: Oct 2013 @@ -17,15 +19,17 @@ KernelVersion: 3.13 Description: The attributes: - file - The path to the backing file for the LUN. + =========== ============================================== + file The path to the backing file for the LUN. Required if LUN is not marked as removable. - ro - Flag specifying access to the LUN shall be + ro Flag specifying access to the LUN shall be read-only. This is implied if CD-ROM emulation is enabled as well as when it was impossible to open "filename" in R/W mode. - removable - Flag specifying that LUN shall be indicated as + removable Flag specifying that LUN shall be indicated as being removable. - cdrom - Flag specifying that LUN shall be reported as + cdrom Flag specifying that LUN shall be reported as being a CD-ROM. - nofua - Flag specifying that FUA flag + nofua Flag specifying that FUA flag in SCSI WRITE(10,12) + =========== ============================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-midi b/Documentation/ABI/testing/configfs-usb-gadget-midi index 6b341df7249c..07389cddd51a 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-midi +++ b/Documentation/ABI/testing/configfs-usb-gadget-midi @@ -4,9 +4,11 @@ KernelVersion: 3.19 Description: The attributes: - index - index value for the USB MIDI adapter - id - ID string for the USB MIDI adapter - buflen - MIDI buffer length - qlen - USB read request queue length - in_ports - number of MIDI input ports - out_ports - number of MIDI output ports + ========== ==================================== + index index value for the USB MIDI adapter + id ID string for the USB MIDI adapter + buflen MIDI buffer length + qlen USB read request queue length + in_ports number of MIDI input ports + out_ports number of MIDI output ports + ========== ==================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-printer b/Documentation/ABI/testing/configfs-usb-gadget-printer index 6b0714e3c605..7aa731bac2da 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-printer +++ b/Documentation/ABI/testing/configfs-usb-gadget-printer @@ -4,6 +4,8 @@ KernelVersion: 4.1 Description: The attributes: - pnp_string - Data to be passed to the host in pnp string - q_len - Number of requests per endpoint + ========== =========================================== + pnp_string Data to be passed to the host in pnp string + q_len Number of requests per endpoint + ========== =========================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink index f56335af2d88..1f3d31b607b7 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink @@ -4,11 +4,13 @@ KernelVersion: 3.13 Description: The attributes: - pattern - 0 (all zeros), 1 (mod63), 2 (none) - isoc_interval - 1..16 - isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss) - isoc_mult - 0..2 (hs/ss only) - isoc_maxburst - 0..15 (ss only) - buflen - buffer length - bulk_qlen - depth of queue for bulk - iso_qlen - depth of queue for iso + ============== ================================== + pattern 0 (all zeros), 1 (mod63), 2 (none) + isoc_interval 1..16 + isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss) + isoc_mult 0..2 (hs/ss only) + isoc_maxburst 0..15 (ss only) + buflen buffer length + bulk_qlen depth of queue for bulk + iso_qlen depth of queue for iso + ============== ================================== diff --git a/Documentation/ABI/testing/configfs-usb-gadget-subset b/Documentation/ABI/testing/configfs-usb-gadget-subset index 9373e2c51ea4..0061b864351f 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-subset +++ b/Documentation/ABI/testing/configfs-usb-gadget-subset @@ -4,11 +4,13 @@ KernelVersion: 3.11 Description: The attributes: - ifname - network device interface name associated with + ========== ============================================= + ifname network device interface name associated with this function instance - qmult - queue length multiplier for high and + qmult queue length multiplier for high and super speed - host_addr - MAC address of host's end of this + host_addr MAC address of host's end of this Ethernet over USB link - dev_addr - MAC address of device's end of this + dev_addr MAC address of device's end of this Ethernet over USB link + ========== ============================================= diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2 index 2bfdd4efa9bd..d4356c8b8cd6 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uac2 +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2 @@ -4,9 +4,11 @@ KernelVersion: 3.18 Description: The attributes: - c_chmask - capture channel mask - c_srate - capture sampling rate - c_ssize - capture sample size (bytes) - p_chmask - playback channel mask - p_srate - playback sampling rate - p_ssize - playback sample size (bytes) + ========= ============================ + c_chmask capture channel mask + c_srate capture sampling rate + c_ssize capture sample size (bytes) + p_chmask playback channel mask + p_srate playback sampling rate + p_ssize playback sample size (bytes) + ========= ============================ diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc index cee81b0347bb..ac5e11af79a8 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc @@ -55,7 +55,7 @@ Description: Default output terminal descriptors ============== ============================================= iTerminal index of string descriptor - bSourceID id of the terminal to which this terminal + bSourceID id of the terminal to which this terminal is connected bAssocTerminal id of the input terminal to which this output terminal is associated diff --git a/Documentation/ABI/testing/debugfs-cec-error-inj b/Documentation/ABI/testing/debugfs-cec-error-inj index 5afcd78fbdb7..8debcb08a3b5 100644 --- a/Documentation/ABI/testing/debugfs-cec-error-inj +++ b/Documentation/ABI/testing/debugfs-cec-error-inj @@ -23,7 +23,7 @@ error injections without having to know the details of the driver-specific commands. Note that the output of 'error-inj' shall be valid as input to 'error-inj'. -So this must work: +So this must work:: $ cat error-inj >einj.txt $ cat einj.txt >error-inj diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index 2e9ae311e02d..c5d678d39144 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -20,9 +20,13 @@ Description: Allow the root user to disable/enable in runtime the clock The user can supply a bitmask value, each bit represents a different engine to disable/enable its clock gating feature. The bitmask is composed of 20 bits: - 0 - 7 : DMA channels - 8 - 11 : MME engines - 12 - 19 : TPC engines + + ======= ============ + 0 - 7 DMA channels + 8 - 11 MME engines + 12 - 19 TPC engines + ======= ============ + The bit's location of a specific engine can be determined using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values are defined in uapi habanalabs.h file in enum gaudi_engine_id @@ -59,6 +63,7 @@ Description: Allows the root user to read or write directly through the the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory @@ -73,6 +78,7 @@ Description: Allows the root user to read or write 64 bit data directly the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory diff --git a/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/Documentation/ABI/testing/debugfs-pfo-nx-crypto index 685d5a448423..f75a655c1531 100644 --- a/Documentation/ABI/testing/debugfs-pfo-nx-crypto +++ b/Documentation/ABI/testing/debugfs-pfo-nx-crypto @@ -4,42 +4,42 @@ KernelVersion: 3.4 Contact: Kent Yoder Description: - These debugfs interfaces are built by the nx-crypto driver, built in +These debugfs interfaces are built by the nx-crypto driver, built in arch/powerpc/crypto/nx. Error Detection =============== errors: -- A u32 providing a total count of errors since the driver was loaded. The -only errors counted here are those returned from the hcall, H_COP_OP. + A u32 providing a total count of errors since the driver was loaded. The + only errors counted here are those returned from the hcall, H_COP_OP. last_error: -- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not -recorded here (the hcall will retry until -EBUSY goes away). + The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not + recorded here (the hcall will retry until -EBUSY goes away). last_error_pid: -- The process ID of the process who received the most recent error from the -hcall. + The process ID of the process who received the most recent error from the + hcall. Device Use ========== aes_bytes: -- The total number of bytes encrypted using AES in any of the driver's -supported modes. + The total number of bytes encrypted using AES in any of the driver's + supported modes. aes_ops: -- The total number of AES operations submitted to the hardware. + The total number of AES operations submitted to the hardware. sha256_bytes: -- The total number of bytes hashed by the hardware using SHA-256. + The total number of bytes hashed by the hardware using SHA-256. sha256_ops: -- The total number of SHA-256 operations submitted to the hardware. + The total number of SHA-256 operations submitted to the hardware. sha512_bytes: -- The total number of bytes hashed by the hardware using SHA-512. + The total number of bytes hashed by the hardware using SHA-512. sha512_ops: -- The total number of SHA-512 operations submitted to the hardware. + The total number of SHA-512 operations submitted to the hardware. diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd index 787907d70462..f6f65a4faea0 100644 --- a/Documentation/ABI/testing/debugfs-pktcdvd +++ b/Documentation/ABI/testing/debugfs-pktcdvd @@ -10,7 +10,7 @@ these files in debugfs: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/ ==== ====== ==================================== - info (0444) Lots of driver statistics and infos. + info 0444 Lots of driver statistics and infos. ==== ====== ==================================== Example:: diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm index c8f7dadd591c..ad08f535af3b 100644 --- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm @@ -2,10 +2,12 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign Date: Jun 2020 KernelVersion: 5.8 Contact: Marek Behún -Description: (W) - Message to sign with the ECDSA private key stored in +Description: + + === =========================================================== + (W) Message to sign with the ECDSA private key stored in device's OTP. The message must be exactly 64 bytes (since this is intended for SHA-512 hashes). - (R) - The resulting signature, 136 bytes. This contains the R and + (R) The resulting signature, 136 bytes. This contains the R and S values of the ECDSA signature, both in big-endian format. + === =========================================================== diff --git a/Documentation/ABI/testing/debugfs-wilco-ec b/Documentation/ABI/testing/debugfs-wilco-ec index 9d8d9d2def5b..682e3c09ef4d 100644 --- a/Documentation/ABI/testing/debugfs-wilco-ec +++ b/Documentation/ABI/testing/debugfs-wilco-ec @@ -27,16 +27,17 @@ Description: for writing, two for the type and at least a single byte of data. - Example: - // Request EC info type 3 (EC firmware build date) - // Corresponds with sending type 0x00f0 with - // MBOX = [38, 00, 03, 00] - $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw - // View the result. The decoded ASCII result "12/21/18" is - // included after the raw hex. - // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] - $ cat /sys/kernel/debug/wilco_ec/raw - 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... + Example:: + + // Request EC info type 3 (EC firmware build date) + // Corresponds with sending type 0x00f0 with + // MBOX = [38, 00, 03, 00] + $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw + // View the result. The decoded ASCII result "12/21/18" is + // included after the raw hex. + // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] + $ cat /sys/kernel/debug/wilco_ec/raw + 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... Note that the first 16 bytes of the received MBOX[] will be printed, even if some of the data is junk, and skipping bytes diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi index fc919ce16008..5f3a0dc67050 100644 --- a/Documentation/ABI/testing/dell-smbios-wmi +++ b/Documentation/ABI/testing/dell-smbios-wmi @@ -10,29 +10,29 @@ Description: 1) To perform an SMBIOS call from userspace, you'll need to - first determine the minimum size of the calling interface - buffer for your machine. - Platforms that contain larger buffers can return larger - objects from the system firmware. - Commonly this size is either 4k or 32k. + first determine the minimum size of the calling interface + buffer for your machine. + Platforms that contain larger buffers can return larger + objects from the system firmware. + Commonly this size is either 4k or 32k. - To determine the size of the buffer read() a u64 dword from - the WMI character device /dev/wmi/dell-smbios. + To determine the size of the buffer read() a u64 dword from + the WMI character device /dev/wmi/dell-smbios. 2) After you've determined the minimum size of the calling - interface buffer, you can allocate a structure that represents - the structure documented above. + interface buffer, you can allocate a structure that represents + the structure documented above. 3) In the 'length' object store the size of the buffer you - determined above and allocated. + determined above and allocated. 4) In this buffer object, prepare as necessary for the SMBIOS - call you're interested in. Typically SMBIOS buffers have - "class", "select", and "input" defined to values that coincide - with the data you are interested in. - Documenting class/select/input values is outside of the scope - of this documentation. Check with the libsmbios project for - further documentation on these values. + call you're interested in. Typically SMBIOS buffers have + "class", "select", and "input" defined to values that coincide + with the data you are interested in. + Documenting class/select/input values is outside of the scope + of this documentation. Check with the libsmbios project for + further documentation on these values. 6) Run the call by using ioctl() as described in the header. diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev index 7b265fbb47e3..66bdcd188b6c 100644 --- a/Documentation/ABI/testing/gpio-cdev +++ b/Documentation/ABI/testing/gpio-cdev @@ -12,15 +12,16 @@ Description: The following file operations are supported: open(2) - Currently the only useful flags are O_RDWR. + Currently the only useful flags are O_RDWR. ioctl(2) - Initiate various actions. - See the inline documentation in [include/uapi] - for descriptions of all ioctls. + Initiate various actions. + + See the inline documentation in [include/uapi] + for descriptions of all ioctls. close(2) - Stops and free up the I/O contexts that was associated - with the file descriptor. + Stops and free up the I/O contexts that was associated + with the file descriptor. Users: TBD diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats index df5a3a8c1edf..e58d641443d3 100644 --- a/Documentation/ABI/testing/procfs-diskstats +++ b/Documentation/ABI/testing/procfs-diskstats @@ -35,7 +35,9 @@ Description: Kernel 5.5+ appends two more fields for flush requests: - 19 - flush requests completed successfully - 20 - time spent flushing + == ===================================== + 19 flush requests completed successfully + 20 time spent flushing + == ===================================== For more details refer to Documentation/admin-guide/iostats.rst diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup index 046978193368..a4e31c465194 100644 --- a/Documentation/ABI/testing/procfs-smaps_rollup +++ b/Documentation/ABI/testing/procfs-smaps_rollup @@ -14,28 +14,28 @@ Description: For more details, see Documentation/filesystems/proc.rst and the procfs man page. - Typical output looks like this: + Typical output looks like this:: - 00100000-ff709000 ---p 00000000 00:00 0 [rollup] - Size: 1192 kB - KernelPageSize: 4 kB - MMUPageSize: 4 kB - Rss: 884 kB - Pss: 385 kB - Pss_Anon: 301 kB - Pss_File: 80 kB - Pss_Shmem: 4 kB - Shared_Clean: 696 kB - Shared_Dirty: 0 kB - Private_Clean: 120 kB - Private_Dirty: 68 kB - Referenced: 884 kB - Anonymous: 68 kB - LazyFree: 0 kB - AnonHugePages: 0 kB - ShmemPmdMapped: 0 kB - Shared_Hugetlb: 0 kB - Private_Hugetlb: 0 kB - Swap: 0 kB - SwapPss: 0 kB - Locked: 385 kB + 00100000-ff709000 ---p 00000000 00:00 0 [rollup] + Size: 1192 kB + KernelPageSize: 4 kB + MMUPageSize: 4 kB + Rss: 884 kB + Pss: 385 kB + Pss_Anon: 301 kB + Pss_File: 80 kB + Pss_Shmem: 4 kB + Shared_Clean: 696 kB + Shared_Dirty: 0 kB + Private_Clean: 120 kB + Private_Dirty: 68 kB + Referenced: 884 kB + Anonymous: 68 kB + LazyFree: 0 kB + AnonHugePages: 0 kB + ShmemPmdMapped: 0 kB + Shared_Hugetlb: 0 kB + Private_Hugetlb: 0 kB + Swap: 0 kB + SwapPss: 0 kB + Locked: 385 kB diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore index d45209abdb1b..5b02540781a2 100644 --- a/Documentation/ABI/testing/pstore +++ b/Documentation/ABI/testing/pstore @@ -9,25 +9,25 @@ Description: Generic interface to platform dependent persistent storage. provide a generic interface to show records captured in the dying moments. In the case of a panic the last part of the console log is captured, but other interesting - data can also be saved. + data can also be saved:: - # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore + # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore - $ ls -l /sys/fs/pstore/ - total 0 - -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 + $ ls -l /sys/fs/pstore/ + total 0 + -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 Different users of this interface will result in different filename prefixes. Currently two are defined: - "dmesg" - saved console log - "mce" - architecture dependent data from fatal h/w error + - "dmesg" - saved console log + - "mce" - architecture dependent data from fatal h/w error Once the information in a file has been read, removing the file will signal to the underlying persistent storage - device that it can reclaim the space for later re-use. + device that it can reclaim the space for later re-use:: - $ rm /sys/fs/pstore/dmesg-erst-1 + $ rm /sys/fs/pstore/dmesg-erst-1 The expectation is that all files in /sys/fs/pstore/ will be saved elsewhere and erased from persistent store @@ -44,4 +44,3 @@ Description: Generic interface to platform dependent persistent storage. backends are available, the preferred backend may be set by passing the pstore.backend= argument to the kernel at boot time. - diff --git a/Documentation/ABI/testing/sysfs-block-rnbd b/Documentation/ABI/testing/sysfs-block-rnbd index 8f070b47f361..14a6fe9422b3 100644 --- a/Documentation/ABI/testing/sysfs-block-rnbd +++ b/Documentation/ABI/testing/sysfs-block-rnbd @@ -9,9 +9,9 @@ Description: To unmap a volume, "normal" or "force" has to be written to: is using the device. When "force" is used, the device is also unmapped when device is in use. All I/Os that are in progress will fail. - Example: + Example:: - # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device + # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device What: /sys/block/rnbd/rnbd/state Date: Feb 2020 diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi index c78603497b97..58abacf59b2a 100644 --- a/Documentation/ABI/testing/sysfs-bus-acpi +++ b/Documentation/ABI/testing/sysfs-bus-acpi @@ -5,6 +5,7 @@ Description: This attribute indicates the full path of ACPI namespace object associated with the device object. For example, \_SB_.PCI0. + This file is not present for device objects representing fixed ACPI hardware features (like power and sleep buttons). diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 index b5f526081711..3e92cbd3fd83 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 @@ -4,7 +4,10 @@ KernelVersion: 3.19 Contact: Mathieu Poirier Description: (RW) Add/remove a sink from a trace path. There can be multiple source for a single sink. - ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink + + ex:: + + echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink What: /sys/bus/coresight/devices/.etb/trigger_cntr Date: November 2014 diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css index 966f8504bd7b..12a733fe357f 100644 --- a/Documentation/ABI/testing/sysfs-bus-css +++ b/Documentation/ABI/testing/sysfs-bus-css @@ -20,6 +20,7 @@ Contact: Cornelia Huck Description: Contains the ids of the channel paths used by this subchannel, as reported by the channel subsystem during subchannel recognition. + Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL @@ -31,6 +32,7 @@ Description: Contains the PIM/PAM/POM values, as reported by the channel subsystem when last queried by the common I/O layer (this implies that this attribute is not necessarily in sync with the values current in the channel subsystem). + Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL @@ -53,6 +55,7 @@ Description: This file allows the driver for a device to be specified. When opt-out of driver binding using a driver_override name such as "none". Only a single driver may be specified in the override, there is no support for parsing delimiters. + Note that unlike the mechanism of the same name for pci, this file does not allow to override basic matching rules. I.e., the driver must still match the subchannel type of the device. diff --git a/Documentation/ABI/testing/sysfs-bus-dfl b/Documentation/ABI/testing/sysfs-bus-dfl index 23543be904f2..b0265ab17200 100644 --- a/Documentation/ABI/testing/sysfs-bus-dfl +++ b/Documentation/ABI/testing/sysfs-bus-dfl @@ -4,6 +4,7 @@ KernelVersion: 5.10 Contact: Xu Yilun Description: Read-only. It returns type of DFL FIU of the device. Now DFL supports 2 FIU types, 0 for FME, 1 for PORT. + Format: 0x%x What: /sys/bus/dfl/devices/dfl_dev.X/feature_id @@ -12,4 +13,5 @@ KernelVersion: 5.10 Contact: Xu Yilun Description: Read-only. It returns feature identifier local to its DFL FIU type. + Format: 0x%x diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index 2273627df190..de390a010af8 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: chip = "config:16-31" core = "config:16-31" @@ -16,9 +16,9 @@ Description: Read-only. Attribute group to describe the magic bits offset = "config:32-63" vcpu = "config:16-31" - For example, + For example:: - PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" + PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0" In this event, '?' after chip specifies that this value will be provided by user while running this event. diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci index 6a023b42486c..12e2bf92783f 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci @@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits Each attribute under this group defines a bit range of the perf_event_attr.config. All supported attributes are listed - below. + below:: counter_info_version = "config:16-23" length = "config:24-31" @@ -20,9 +20,9 @@ Description: Read-only. Attribute group to describe the magic bits secondary_index = "config:0-15" starting_index = "config:32-63" - For example, + For example:: - processor_core_utilization_instructions_completed = "request=0x94, + processor_core_utilization_instructions_completed = "request=0x94, phys_processor_idx=?,counter_info_version=0x8, length=8,offset=0x18" @@ -36,6 +36,7 @@ Description: '0' if the hypervisor is configured to forbid access to event counters being accumulated by other guests and to physical domain event counters. + '1' if that access is allowed. What: /sys/bus/event_source/devices/hv_gpci/interface/ga diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe index 657df13b100d..8fe787cc4ab7 100644 --- a/Documentation/ABI/testing/sysfs-bus-fcoe +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -3,16 +3,19 @@ Date: August 2012 KernelVersion: TBD Contact: Robert Love , devel@open-fcoe.org Description: The FCoE bus. Attributes in this directory are control interfaces. + Attributes: - ctlr_create: 'FCoE Controller' instance creation interface. Writing an + ctlr_create: + 'FCoE Controller' instance creation interface. Writing an to this file will allocate and populate sysfs with a fcoe_ctlr_device (ctlr_X). The user can then configure any per-port settings and finally write to the fcoe_ctlr_device's 'start' attribute to begin the kernel's discovery and login process. - ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a + ctlr_destroy: + 'FCoE Controller' instance removal interface. Writing a fcoe_ctlr_device's sysfs name to this file will log the fcoe_ctlr_device out of the fabric or otherwise connected FCoE devices. It will also free all kernel memory allocated @@ -32,11 +35,13 @@ Description: 'FCoE Controller' instances on the fcoe bus. Attributes: - fcf_dev_loss_tmo: Device loss timeout period (see below). Changing + fcf_dev_loss_tmo: + Device loss timeout period (see below). Changing this value will change the dev_loss_tmo for all FCFs discovered by this controller. - mode: Display or change the FCoE Controller's mode. Possible + mode: + Display or change the FCoE Controller's mode. Possible modes are 'Fabric' and 'VN2VN'. If a FCoE Controller is started in 'Fabric' mode then FIP FCF discovery is initiated and ultimately a fabric login is attempted. @@ -44,23 +49,30 @@ Attributes: FIP VN2VN discovery and login is performed. A FCoE Controller only supports one mode at a time. - enabled: Whether an FCoE controller is enabled or disabled. + enabled: + Whether an FCoE controller is enabled or disabled. 0 if disabled, 1 if enabled. Writing either 0 or 1 to this file will enable or disable the FCoE controller. - lesb/link_fail: Link Error Status Block (LESB) link failure count. + lesb/link_fail: + Link Error Status Block (LESB) link failure count. - lesb/vlink_fail: Link Error Status Block (LESB) virtual link + lesb/vlink_fail: + Link Error Status Block (LESB) virtual link failure count. - lesb/miss_fka: Link Error Status Block (LESB) missed FCoE + lesb/miss_fka: + Link Error Status Block (LESB) missed FCoE Initialization Protocol (FIP) Keep-Alives (FKA). - lesb/symb_err: Link Error Status Block (LESB) symbolic error count. + lesb/symb_err: + Link Error Status Block (LESB) symbolic error count. - lesb/err_block: Link Error Status Block (LESB) block error count. + lesb/err_block: + Link Error Status Block (LESB) block error count. - lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel + lesb/fcs_error: + Link Error Status Block (LESB) Fibre Channel Services error count. Notes: ctlr_X (global increment starting at 0) @@ -75,31 +87,41 @@ Description: 'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel Fibre Channel frames into a FC fabric. It can also take outbound FC frames and pack them in Ethernet packets to be sent to their destination on the Ethernet segment. + Attributes: - fabric_name: Identifies the fabric that the FCF services. + fabric_name: + Identifies the fabric that the FCF services. - switch_name: Identifies the FCF. + switch_name: + Identifies the FCF. - priority: The switch's priority amongst other FCFs on the same + priority: + The switch's priority amongst other FCFs on the same fabric. - selected: 1 indicates that the switch has been selected for use; + selected: + 1 indicates that the switch has been selected for use; 0 indicates that the switch will not be used. - fc_map: The Fibre Channel MAP + fc_map: + The Fibre Channel MAP - vfid: The Virtual Fabric ID + vfid: + The Virtual Fabric ID - mac: The FCF's MAC address + mac: + The FCF's MAC address - fka_period: The FIP Keep-Alive period + fka_period: + The FIP Keep-Alive period fabric_state: The internal kernel state - "Unknown" - Initialization value - "Disconnected" - No link to the FCF/fabric - "Connected" - Host is connected to the FCF - "Deleted" - FCF is being removed from the system + + - "Unknown" - Initialization value + - "Disconnected" - No link to the FCF/fabric + - "Connected" - Host is connected to the FCF + - "Deleted" - FCF is being removed from the system dev_loss_tmo: The device loss timeout period for this FCF. diff --git a/Documentation/ABI/testing/sysfs-bus-fsl-mc b/Documentation/ABI/testing/sysfs-bus-fsl-mc index 80256b8b4f26..bf3c6af6ad89 100644 --- a/Documentation/ABI/testing/sysfs-bus-fsl-mc +++ b/Documentation/ABI/testing/sysfs-bus-fsl-mc @@ -6,8 +6,10 @@ Description: the driver to attempt to bind to the device found at this location. The format for the location is Object.Id and is the same as found in /sys/bus/fsl-mc/devices/. - For example: - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind + + For example:: + + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind What: /sys/bus/fsl-mc/drivers/.../unbind Date: December 2016 @@ -17,5 +19,7 @@ Description: driver to attempt to unbind from the device found at this location. The format for the location is Object.Id and is the same as found in /sys/bus/fsl-mc/devices/. - For example: - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind + + For example:: + + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 index 9de269bb0ae5..42dfc9399d2d 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 @@ -3,19 +3,25 @@ Date: February 2011 Contact: Minkyu Kang Description: show what device is attached - NONE - no device - USB - USB device is attached - UART - UART is attached - CHARGER - Charger is attaced - JIG - JIG is attached + + ======= ====================== + NONE no device + USB USB device is attached + UART UART is attached + CHARGER Charger is attaced + JIG JIG is attached + ======= ====================== What: /sys/bus/i2c/devices/.../switch Date: February 2011 Contact: Minkyu Kang Description: show or set the state of manual switch - VAUDIO - switch to VAUDIO path - UART - switch to UART path - AUDIO - switch to AUDIO path - DHOST - switch to DHOST path - AUTO - switch automatically by device + + ======= ============================== + VAUDIO switch to VAUDIO path + UART switch to UART path + AUDIO switch to AUDIO path + DHOST switch to DHOST path + AUTO switch automatically by device + ======= ============================== diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c index 2f332ec36f82..1f4a2662335b 100644 --- a/Documentation/ABI/testing/sysfs-bus-i3c +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -84,6 +84,7 @@ Description: by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". See the I3C specification for more details about these HDR modes. + This entry describes the HDRCAP of the master controller driving the bus. @@ -135,6 +136,7 @@ Description: Expose the HDR (High Data Rate) capabilities of a device. Returns a list of supported HDR mode, each element is separated by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR modes. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index e3df71987eff..df42bed09f25 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -15,6 +15,7 @@ Description: based on hardware generated events (e.g. data ready) or provided by a separate driver for other hardware (e.g. periodic timer, GPIO or high resolution timer). + Contains trigger type specific elements. These do not generalize well and hence are not documented in this file. X is the IIO index of the trigger. @@ -666,6 +667,7 @@ Description: [Y][_name]__thresh_falling_value may take different values, but the device can only enable both thresholds or neither. + Note the driver will assume the last p events requested are to be enabled where p is how many it supports (which may vary depending on the exact set requested. So if you want to be @@ -720,6 +722,7 @@ Description: [Y][_name]__roc_falling_value may take different values, but the device can only enable both rate of change thresholds or neither. + Note the driver will assume the last p events requested are to be enabled where p is however many it supports (which may vary depending on the exact set requested. So if you want to be @@ -775,9 +778,11 @@ Description: Specifies the value of threshold that the device is comparing against for the events enabled by Y[_name]_thresh[_rising|falling]_en. + If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. + The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). @@ -860,6 +865,7 @@ Description: If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single hysteresis value applies to both directions. + For falling events the hysteresis is added to the _value attribute for this event to get the upper threshold for when the event goes back to normal, for rising events the hysteresis is subtracted from the _value @@ -906,6 +912,7 @@ Description: Specifies the value of rate of change threshold that the device is comparing against for the events enabled by [Y][_name]_roc[_rising|falling]_en. + If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. @@ -1305,6 +1312,7 @@ Description: Proximity measurement indicating that some object is near the sensor, usually by observing reflectivity of infrared or ultrasound emitted. + Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements indicate closer objects, and vice versa. Units after @@ -1450,9 +1458,12 @@ Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the maximum number of scan elements to wait for. + Poll will block until the watermark is reached. + Blocking read will wait until the minimum between the requested read amount or the low water mark is available. + Non-blocking read will retrieve the available samples from the buffer even if there are less samples then watermark level. This allows the application to block on poll with a timeout and read @@ -1481,11 +1492,13 @@ Description: device settings allows it (e.g. if a trigger is set that samples data differently that the hardware fifo does then hardware fifo will not enabled). + If the hardware fifo is enabled and the level of the hardware fifo reaches the hardware fifo watermark level the device will flush its hardware fifo to the device buffer. Doing a non blocking read on the device when no samples are present in the device buffer will also force a flush. + When the hardware fifo is enabled there is no need to use a trigger to use buffer mode since the watermark settings guarantees that the hardware fifo is flushed to the device @@ -1523,6 +1536,7 @@ Description: A single positive integer specifying the minimum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. + If the user sets buffer/watermark to a value less than this one, then the hardware watermark will remain unset. @@ -1533,6 +1547,7 @@ Description: A single positive integer specifying the maximum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. + If the user sets buffer/watermark to a value greater than this one, then the hardware watermark will be capped at this value. @@ -1544,6 +1559,7 @@ Description: levels for the hardware fifo. This entry is optional and if it is not present it means that all the values between hwfifo_watermark_min and hwfifo_watermark_max are supported. + If the user sets buffer/watermark to a value greater than hwfifo_watermak_min but not equal to any of the values in this list, the driver will chose an appropriate value for the @@ -1605,7 +1621,8 @@ KernelVersion: 4.1.0 Contact: linux-iio@vger.kernel.org Description: '1' (enable) or '0' (disable) specifying the enable - of heater function. Same reading values apply + of heater function. Same reading values apply. + This ABI is especially applicable for humidity sensors to heatup the device and get rid of any condensation in some humidity environment diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 index f30b4c424fb6..4b01150af397 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 @@ -19,9 +19,11 @@ Description: is separately set for "GND-Open" and "Supply-Open" modes. Channels 0..31 have common low threshold values, but could have different sensing_modes. + The low voltage threshold range is between 2..21V. Hysteresis between low and high thresholds can not be lower then 2 and can not be odd. + If falling threshold results hysteresis to odd value then rising threshold is automatically subtracted by one. @@ -34,10 +36,13 @@ Description: this value then the threshold rising event is pushed. Depending on in_voltageY_sensing_mode the high voltage threshold is separately set for "GND-Open" and "Supply-Open" modes. + Channels 0..31 have common high threshold values, but could have different sensing_modes. + The high voltage threshold range is between 3..22V. Hysteresis between low and high thresholds can not be lower then 2 and can not be odd. + If rising threshold results hysteresis to odd value then falling threshold is automatically appended by one. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 index efe4c85e3c8b..1975c7a1af34 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 @@ -5,10 +5,13 @@ Description: The STM32 ADC can be configured to use external trigger sources (e.g. timers, pwm or exti gpio). Then, it can be tuned to start conversions on external trigger by either: + - "rising-edge" - "falling-edge" - "both-edges". + Reading returns current trigger polarity. + Writing value before enabling conversions sets trigger polarity. What: /sys/bus/iio/devices/triggerX/trigger_polarity_available diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 index a133fd8d081a..40df5c9fef99 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 @@ -15,8 +15,11 @@ Description: first object echoed in meters. Default value is 6.020. This setting limits the time the driver is waiting for a echo. + Showing the range of available values is represented as the minimum value, the step and the maximum value, all enclosed in square brackets. - Example: - [0.043 0.043 11.008] + + Example:: + + [0.043 0.043 11.008] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 index a91aeabe7b24..d065cda7dd96 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 @@ -8,7 +8,9 @@ KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Reading returns either '1' or '0'. + '1' means that the clock in question is present. + '0' means that the clock is missing. What: /sys/bus/iio/devices/iio:deviceX/pllY_locked diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 index 302de64cb424..544548ee794c 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 @@ -27,12 +27,12 @@ What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name KernelVersion: Contact: linux-iio@vger.kernel.org Description: - Reading returns the datasheet name for channel Y: + Reading returns the datasheet name for channel Y:: - out_altvoltage0_name: RF8x - out_altvoltage1_name: RFAUX8x - out_altvoltage2_name: RF16x - out_altvoltage3_name: RF32x + out_altvoltage0_name: RF8x + out_altvoltage1_name: RFAUX8x + out_altvoltage2_name: RF16x + out_altvoltage3_name: RF32x What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown KernelVersion: diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x index 6adba9058b22..66b621f10223 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x @@ -6,10 +6,14 @@ Description: Get measured values from the ADC for these stages. Y is the specific stage number corresponding to datasheet stage names as follows: - 1 -> LED2 - 2 -> ALED2/LED3 - 3 -> LED1 - 4 -> ALED1/LED4 + + == ========== + 1 LED2 + 2 ALED2/LED3 + 3 LED1 + 4 ALED1/LED4 + == ========== + Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 respectively which simply helper channels containing the calculated difference in the value of stage 1 - 2 and 3 - 4. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 index f0ce0a0476ea..220206a20d98 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 @@ -15,5 +15,7 @@ Description: Scheme 0 has wider dynamic range, Scheme 1 proximity detection is less affected by the ambient IR noise variation. - 0 Sensing IR from LED and ambient - 1 Sensing IR from LED with ambient IR rejection + == ============================================= + 0 Sensing IR from LED and ambient + 1 Sensing IR from LED with ambient IR rejection + == ============================================= diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth index 22d0843849a8..b7b2278fe042 100644 --- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth @@ -10,10 +10,13 @@ Date: June 2015 KernelVersion: 4.3 Contact: Alexander Shishkin Description: (RO) Output port type: - 0: not present, - 1: MSU (Memory Storage Unit) - 2: CTP (Common Trace Port) - 4: PTI (MIPI PTI). + + == ========================= + 0 not present, + 1 MSU (Memory Storage Unit) + 2 CTP (Common Trace Port) + 4 PTI (MIPI PTI). + == ========================= What: /sys/bus/intel_th/devices/-gth/outputs/[0-7]_drop Date: June 2015 diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem index c1a67275c43f..8316c33862a0 100644 --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem @@ -11,19 +11,26 @@ Description: at 'Documentation/powerpc/papr_hcalls.rst' . Below are the flags reported in this sysfs file: - * "not_armed" : Indicates that NVDIMM contents will not + * "not_armed" + Indicates that NVDIMM contents will not survive a power cycle. - * "flush_fail" : Indicates that NVDIMM contents + * "flush_fail" + Indicates that NVDIMM contents couldn't be flushed during last shut-down event. - * "restore_fail": Indicates that NVDIMM contents + * "restore_fail" + Indicates that NVDIMM contents couldn't be restored during NVDIMM initialization. - * "encrypted" : NVDIMM contents are encrypted. - * "smart_notify": There is health event for the NVDIMM. - * "scrubbed" : Indicating that contents of the + * "encrypted" + NVDIMM contents are encrypted. + * "smart_notify" + There is health event for the NVDIMM. + * "scrubbed" + Indicating that contents of the NVDIMM have been scrubbed. - * "locked" : Indicating that NVDIMM contents cant + * "locked" + Indicating that NVDIMM contents cant be modified until next power cycle. What: /sys/bus/nd/devices/nmemX/papr/perf_stats @@ -51,4 +58,4 @@ Description: * "MedWDur " : Media Write Duration * "CchRHCnt" : Cache Read Hit Count * "CchWHCnt" : Cache Write Hit Count - * "FastWCnt" : Fast Write Count \ No newline at end of file + * "FastWCnt" : Fast Write Count diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 450296cc7948..77ad9ec3c801 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -7,8 +7,10 @@ Description: this location. This is useful for overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as - found in /sys/bus/pci/devices/. For example: - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + found in /sys/bus/pci/devices/. For example:: + + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../unbind @@ -20,8 +22,10 @@ Description: this location. This may be useful when overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as - found in /sys/bus/pci/devices/. For example: - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + found in /sys/bus/pci/devices/. For example:: + + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../new_id @@ -38,8 +42,9 @@ Description: Class, Class Mask, and Private Driver Data. The Vendor ID and Device ID fields are required, the rest are optional. Upon successfully adding an ID, the driver will probe - for the device and attempt to bind to it. For example: - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + for the device and attempt to bind to it. For example:: + + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id What: /sys/bus/pci/drivers/.../remove_id Date: February 2009 @@ -54,8 +59,9 @@ Description: required, the rest are optional. After successfully removing an ID, the driver will no longer support the device. This is useful to ensure auto probing won't - match the driver to the device. For example: - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id + match the driver to the device. For example:: + + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id What: /sys/bus/pci/rescan Date: January 2009 diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt index 8a200f4eefbd..f85db86d63e8 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt @@ -4,6 +4,7 @@ Contact: Cezary Rojewski Description: Version of AudioDSP firmware ASoC catpt driver is communicating with. + Format: %d.%d.%d.%d, type:major:minor:build. What: /sys/devices/pci0000:00//fw_info diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd index 60c60fa624b2..c90d97a80855 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd +++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd @@ -21,11 +21,11 @@ Description: number returns the port to normal operation. For example: To force the high-speed device attached to - port 4 on bus 2 to run at full speed: + port 4 on bus 2 to run at full speed:: echo 4 >/sys/bus/usb/devices/usb2/../companion - To return the port to high-speed operation: + To return the port to high-speed operation:: echo -4 >/sys/bus/usb/devices/usb2/../companion diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index cc30bee8b5f4..417a2fe21be1 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -7,6 +7,8 @@ Description: Usage: [] + Example:: + $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add The snapshot name can be "-" or omitted to map the image @@ -23,6 +25,8 @@ Description: Usage: [force] + Example:: + $ echo 2 > /sys/bus/rbd/remove Optional "force" argument which when passed will wait for @@ -80,26 +84,29 @@ Date: Oct, 2010 KernelVersion: v2.6.37 Contact: Sage Weil Description: - size: (RO) The size (in bytes) of the mapped block + + ============== ================================================ + size (RO) The size (in bytes) of the mapped block device. - major: (RO) The block device major number. + major (RO) The block device major number. - client_id: (RO) The ceph unique client id that was assigned + client_id (RO) The ceph unique client id that was assigned for this specific session. - pool: (RO) The name of the storage pool where this rbd + pool (RO) The name of the storage pool where this rbd image resides. An rbd image name is unique within its pool. - name: (RO) The name of the rbd image. + name (RO) The name of the rbd image. - refresh: (WO) Writing to this file will reread the image + refresh (WO) Writing to this file will reread the image header data and set all relevant data structures accordingly. - current_snap: (RO) The current snapshot for which the device + current_snap (RO) The current snapshot for which the device is mapped. + ============== ================================================ What: /sys/bus/rbd/devices//pool_id @@ -117,11 +124,13 @@ Date: Oct, 2012 KernelVersion: v3.7 Contact: Sage Weil Description: - image_id: (RO) The unique id for the rbd image. (For rbd + ========= =============================================== + image_id (RO) The unique id for the rbd image. (For rbd image format 1 this is empty.) - features: (RO) A hexadecimal encoding of the feature bits + features (RO) A hexadecimal encoding of the feature bits for this image. + ========= =============================================== What: /sys/bus/rbd/devices//parent @@ -149,14 +158,16 @@ Date: Aug, 2016 KernelVersion: v4.9 Contact: Sage Weil Description: - snap_id: (RO) The current snapshot's id. + ============ ================================================ + snap_id (RO) The current snapshot's id. - config_info: (RO) The string written into + config_info (RO) The string written into /sys/bus/rbd/add{,_single_major}. - cluster_fsid: (RO) The ceph cluster UUID. + cluster_fsid (RO) The ceph cluster UUID. - client_addr: (RO) The ceph unique client + client_addr (RO) The ceph unique client entity_addr_t (address + nonce). The format is
:/: '1.2.3.4:1234/5678' or '[1:2:3:4:5:6:7:8]:1234/5678'. + ============ ================================================ diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox index c2a403f20b90..50e80238f30d 100644 --- a/Documentation/ABI/testing/sysfs-bus-siox +++ b/Documentation/ABI/testing/sysfs-bus-siox @@ -8,6 +8,7 @@ Description: When the file contains a "1" the bus is operated and periodically does a push-pull cycle to write and read data from the connected devices. + When writing a "0" or "1" the bus moves to the described state. What: /sys/bus/siox/devices/siox-X/device_add @@ -21,8 +22,10 @@ Description: to add a new device dynamically. is the name that is used to match to a driver (similar to the platform bus). and define the length of the input and output shift register in bytes respectively. + defines the 4 bit device type that is check to identify connection problems. + The new device is added to the end of the existing chain. What: /sys/bus/siox/devices/siox-X/device_remove diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 171127294674..0b4ab9e4b8f4 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -193,10 +193,11 @@ Description: When new NVM image is written to the non-active NVM verification fails an error code is returned instead. This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage - area and authenticate the image in one action. + area and authenticate the image in one action. - Writing "2" will run some basic validation on the image - and flush it to the storage area. + and flush it to the storage area. When read holds status of the last authentication operation if an error occurred during the process. This @@ -213,9 +214,11 @@ Description: This contains name of the property directory the XDomain question. Following directories are already reserved by the Apple XDomain specification: - network: IP/ethernet over Thunderbolt - targetdm: Target disk mode protocol over Thunderbolt - extdisp: External display mode protocol over Thunderbolt + ======== =============================================== + network IP/ethernet over Thunderbolt + targetdm Target disk mode protocol over Thunderbolt + extdisp External display mode protocol over Thunderbolt + ======== =============================================== What: /sys/bus/thunderbolt/devices/./modalias Date: Jan 2018 @@ -293,7 +296,8 @@ Description: For supported devices, automatically authenticate the new Thunderbo image when the device is disconnected from the host system. This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage - area and prepare the device for authentication on disconnect. + area and prepare the device for authentication on disconnect. - Writing "2" will run some basic validation on the image - and flush it to the storage area. + and flush it to the storage area. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index e449b8374f6a..bf2c1968525f 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -9,6 +9,7 @@ Description: by writing INTERFACE to /sys/bus/usb/drivers_probe This allows to avoid side-effects with drivers that need multiple interfaces. + A deauthorized interface cannot be probed or claimed. What: /sys/bus/usb/devices/usbX/interface_authorized_default @@ -216,6 +217,7 @@ Description: - Bit 0 of this field selects the "old" enumeration scheme, as it is considerably faster (it only causes one USB reset instead of 2). + The old enumeration scheme can also be selected globally using /sys/module/usbcore/parameters/old_scheme_first, but it is often not desirable as the new scheme was introduced to diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 index c0e0a9ae7b3d..8251e78abc49 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 @@ -6,8 +6,10 @@ Description: Get the ALS output channel used as input in ALS-current-control mode (0, 1), where: - 0 - out_current0 (backlight 0) - 1 - out_current1 (backlight 1) + == ========================== + 0 out_current0 (backlight 0) + 1 out_current1 (backlight 1) + == ========================== What: /sys/class/backlight//als_en Date: May 2012 @@ -30,8 +32,10 @@ Contact: Johan Hovold Description: Set the brightness-mapping mode (0, 1), where: - 0 - exponential mode - 1 - linear mode + == ================ + 0 exponential mode + 1 linear mode + == ================ What: /sys/class/backlight//pwm Date: April 2012 @@ -40,9 +44,11 @@ Contact: Johan Hovold Description: Set the PWM-input control mask (5 bits), where: - bit 5 - PWM-input enabled in Zone 4 - bit 4 - PWM-input enabled in Zone 3 - bit 3 - PWM-input enabled in Zone 2 - bit 2 - PWM-input enabled in Zone 1 - bit 1 - PWM-input enabled in Zone 0 - bit 0 - PWM-input enabled + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== =========================== diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi index d773d5697cf5..5402bd74ba43 100644 --- a/Documentation/ABI/testing/sysfs-class-bdi +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -24,7 +24,6 @@ default filesystems which do not provide their own BDI. Files under /sys/class/bdi// ---------------------------------- read_ahead_kb (read-write) diff --git a/Documentation/ABI/testing/sysfs-class-chromeos b/Documentation/ABI/testing/sysfs-class-chromeos index 5819699d66ec..74ece942722e 100644 --- a/Documentation/ABI/testing/sysfs-class-chromeos +++ b/Documentation/ABI/testing/sysfs-class-chromeos @@ -17,13 +17,14 @@ Date: August 2015 KernelVersion: 4.2 Description: Tell the EC to reboot in various ways. Options are: - "cancel": Cancel a pending reboot. - "ro": Jump to RO without rebooting. - "rw": Jump to RW without rebooting. - "cold": Cold reboot. - "disable-jump": Disable jump until next reboot. - "hibernate": Hibernate the EC. - "at-shutdown": Reboot after an AP shutdown. + + - "cancel": Cancel a pending reboot. + - "ro": Jump to RO without rebooting. + - "rw": Jump to RW without rebooting. + - "cold": Cold reboot. + - "disable-jump": Disable jump until next reboot. + - "hibernate": Hibernate the EC. + - "at-shutdown": Reboot after an AP shutdown. What: /sys/class/chromeos//version Date: August 2015 diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index a6f51a104c44..818f55970efb 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -217,6 +217,7 @@ Description: read/write card. A power cycle is required to load the image. "none" could be useful for debugging because the trace arrays are preserved. + "user" and "factory" means PERST will cause either the user or user or factory image to be loaded. Default is to reload on PERST whichever image the card has @@ -240,8 +241,11 @@ Contact: linuxppc-dev@lists.ozlabs.org Description: read/write Trust that when an image is reloaded via PERST, it will not have changed. - 0 = don't trust, the image may be different (default) - 1 = trust that the image will not change. + + == ================================================= + 0 don't trust, the image may be different (default) + 1 trust that the image will not change. + == ================================================= Users: https://github.com/ibm-capi/libcxl What: /sys/class/cxl//psl_timebase_synced diff --git a/Documentation/ABI/testing/sysfs-class-devlink b/Documentation/ABI/testing/sysfs-class-devlink index 64791b65c9a3..b662f747c83e 100644 --- a/Documentation/ABI/testing/sysfs-class-devlink +++ b/Documentation/ABI/testing/sysfs-class-devlink @@ -18,9 +18,9 @@ Description: This will be one of the following strings: - 'consumer unbind' - 'supplier unbind' - 'never' + - 'consumer unbind' + - 'supplier unbind' + - 'never' 'consumer unbind' means the device link will be removed when the consumer's driver is unbound from the consumer device. @@ -49,8 +49,10 @@ Description: This will be one of the following strings: - '0' - Does not affect runtime power management - '1' - Affects runtime power management + === ======================================== + '0' Does not affect runtime power management + '1' Affects runtime power management + === ======================================== What: /sys/class/devlink/.../status Date: May 2020 @@ -68,13 +70,13 @@ Description: This will be one of the following strings: - 'not tracked' - 'dormant' - 'available' - 'consumer probing' - 'active' - 'supplier unbinding' - 'unknown' + - 'not tracked' + - 'dormant' + - 'available' + - 'consumer probing' + - 'active' + - 'supplier unbinding' + - 'unknown' 'not tracked' means this device link does not track the status and has no impact on the binding, unbinding and syncing the @@ -114,8 +116,10 @@ Description: This will be one of the following strings: + === ================================ '0' - '1' - Affects runtime power management + '1' Affects runtime power management + === ================================ '0' means the device link can affect other device behaviors like binding/unbinding, suspend/resume, runtime power diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon index 57a726232912..fde0fecd5de9 100644 --- a/Documentation/ABI/testing/sysfs-class-extcon +++ b/Documentation/ABI/testing/sysfs-class-extcon @@ -39,19 +39,22 @@ Description: callback. If the default callback for showing function is used, the - format is like this: - # cat state - USB_OTG=1 - HDMI=0 - TA=1 - EAR_JACK=0 - # + format is like this:: + + # cat state + USB_OTG=1 + HDMI=0 + TA=1 + EAR_JACK=0 + # + In this example, the extcon device has USB_OTG and TA cables attached and HDMI and EAR_JACK cables detached. In order to update the state of an extcon device, enter a hex - state number starting with 0x: - # echo 0xHEX > state + state number starting with 0x:: + + # echo 0xHEX > state This updates the whole state of the extcon device. Inputs of all the methods are required to meet the @@ -84,12 +87,13 @@ Contact: MyungJoo Ham Description: Shows the relations of mutually exclusiveness. For example, if the mutually_exclusive array of extcon device is - {0x3, 0x5, 0xC, 0x0}, then the output is: - # ls mutually_exclusive/ - 0x3 - 0x5 - 0xc - # + {0x3, 0x5, 0xC, 0x0}, then the output is:: + + # ls mutually_exclusive/ + 0x3 + 0x5 + 0xc + # Note that mutually_exclusive is a sub-directory of the extcon device and the file names under the mutually_exclusive diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager index 5284fa33d4c5..d78689c357a5 100644 --- a/Documentation/ABI/testing/sysfs-class-fpga-manager +++ b/Documentation/ABI/testing/sysfs-class-fpga-manager @@ -28,8 +28,7 @@ Description: Read fpga manager state as a string. * firmware request = firmware class request in progress * firmware request error = firmware request failed * write init = preparing FPGA for programming - * write init error = Error while preparing FPGA for - programming + * write init error = Error while preparing FPGA for programming * write = FPGA ready to receive image data * write error = Error while programming * write complete = Doing post programming steps @@ -47,7 +46,7 @@ Description: Read fpga manager status as a string. programming errors to userspace. This is a list of strings for the supported status. - * reconfig operation error - invalid operations detected by + * reconfig operation error - invalid operations detected by reconfiguration hardware. e.g. start reconfiguration with errors not cleared diff --git a/Documentation/ABI/testing/sysfs-class-gnss b/Documentation/ABI/testing/sysfs-class-gnss index 2467b6900eae..c8553d972edd 100644 --- a/Documentation/ABI/testing/sysfs-class-gnss +++ b/Documentation/ABI/testing/sysfs-class-gnss @@ -6,9 +6,11 @@ Description: The GNSS receiver type. The currently identified types reflect the protocol(s) supported by the receiver: + ====== =========== "NMEA" NMEA 0183 "SiRF" SiRF Binary "UBX" UBX + ====== =========== Note that also non-"NMEA" type receivers typically support a subset of NMEA 0183 with vendor extensions (e.g. to allow diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index 65e040978f73..0ed5c2629c6f 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -47,6 +47,7 @@ Contact: Richard Purdie Description: Set the trigger for this LED. A trigger is a kernel based source of LED events. + You can change triggers in a similar manner to the way an IO scheduler is chosen. Trigger specific parameters can appear in /sys/class/leds/ once a given trigger is selected. For diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 index 69befe947d7e..da546e86deb5 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 +++ b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 @@ -27,23 +27,23 @@ Description: ^ | - 0 On -|----+ +----+ +--- + 0 On -|----+ +----+ +--- | | | | | Off-| +-------------------+ +-------------------+ | - 1 On -| +----+ +----+ + 1 On -| +----+ +----+ | | | | | Off |----+ +-------------------+ +------------------ | - 2 On -| +----+ +----+ + 2 On -| +----+ +----+ | | | | | Off-|---------+ +-------------------+ +------------- | - 3 On -| +----+ +----+ + 3 On -| +----+ +----+ | | | | | Off-|--------------+ +-------------------+ +-------- | - 4 On -| +----+ +----+ + 4 On -| +----+ +----+ | | | | | Off-|-------------------+ +-------------------+ +--- | @@ -55,23 +55,23 @@ Description: ^ | - 0 On -| +-------------------+ +-------------------+ + 0 On -| +-------------------+ +-------------------+ | | | | | Off-|----+ +----+ +--- | - 1 On -|----+ +-------------------+ +------------------ + 1 On -|----+ +-------------------+ +------------------ | | | | | Off | +----+ +----+ | - 2 On -|---------+ +-------------------+ +------------- + 2 On -|---------+ +-------------------+ +------------- | | | | | Off-| +----+ +----+ | - 3 On -|--------------+ +-------------------+ +-------- + 3 On -|--------------+ +-------------------+ +-------- | | | | | Off-| +----+ +----+ | - 4 On -|-------------------+ +-------------------+ +--- + 4 On -|-------------------+ +-------------------+ +--- | | | | | Off-| +----+ +----+ | @@ -83,23 +83,23 @@ Description: ^ | - 0 On -|----+ +-------- + 0 On -|----+ +-------- | | | Off-| +---------------------------------------+ | - 1 On -| +----+ +----+ + 1 On -| +----+ +----+ | | | | | Off |----+ +-----------------------------+ +-------- | - 2 On -| +----+ +----+ + 2 On -| +----+ +----+ | | | | | Off-|---------+ +-------------------+ +------------- | - 3 On -| +----+ +----+ + 3 On -| +----+ +----+ | | | | | Off-|--------------+ +---------+ +------------------ | - 4 On -| +---------+ + 4 On -| +---------+ | | | Off-|-------------------+ +----------------------- | diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 index e4c89b261546..e38a835d0a85 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 +++ b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 @@ -6,8 +6,10 @@ Description: Set the ALS output channel to use as input in ALS-current-control mode (1, 2), where: - 1 - out_current1 - 2 - out_current2 + == ============ + 1 out_current1 + 2 out_current2 + == ============ What: /sys/class/leds//als_en Date: May 2012 @@ -24,14 +26,16 @@ Contact: Johan Hovold Description: Set the pattern generator fall and rise times (0..7), where: - 0 - 2048 us - 1 - 262 ms - 2 - 524 ms - 3 - 1.049 s - 4 - 2.097 s - 5 - 4.194 s - 6 - 8.389 s - 7 - 16.78 s + == ======= + 0 2048 us + 1 262 ms + 2 524 ms + 3 1.049 s + 4 2.097 s + 5 4.194 s + 6 8.389 s + 7 16.78 s + == ======= What: /sys/class/leds//id Date: April 2012 @@ -47,8 +51,10 @@ Contact: Johan Hovold Description: Set the brightness-mapping mode (0, 1), where: - 0 - exponential mode - 1 - linear mode + == ================ + 0 exponential mode + 1 linear mode + == ================ What: /sys/class/leds//pwm Date: April 2012 @@ -57,9 +63,11 @@ Contact: Johan Hovold Description: Set the PWM-input control mask (5 bits), where: - bit 5 - PWM-input enabled in Zone 4 - bit 4 - PWM-input enabled in Zone 3 - bit 3 - PWM-input enabled in Zone 2 - bit 2 - PWM-input enabled in Zone 1 - bit 1 - PWM-input enabled in Zone 0 - bit 0 - PWM-input enabled + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== =========================== diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash index 220a0270b47b..11e5677c3672 100644 --- a/Documentation/ABI/testing/sysfs-class-led-flash +++ b/Documentation/ABI/testing/sysfs-class-led-flash @@ -55,26 +55,35 @@ Description: read only Flash faults are re-read after strobing the flash. Possible flash faults: - * led-over-voltage - flash controller voltage to the flash LED + * led-over-voltage + flash controller voltage to the flash LED has exceeded the limit specific to the flash controller - * flash-timeout-exceeded - the flash strobe was still on when + * flash-timeout-exceeded + the flash strobe was still on when the timeout set by the user has expired; not all flash controllers may set this in all such conditions - * controller-over-temperature - the flash controller has + * controller-over-temperature + the flash controller has overheated - * controller-short-circuit - the short circuit protection + * controller-short-circuit + the short circuit protection of the flash controller has been triggered - * led-power-supply-over-current - current in the LED power + * led-power-supply-over-current + current in the LED power supply has exceeded the limit specific to the flash controller - * indicator-led-fault - the flash controller has detected + * indicator-led-fault + the flash controller has detected a short or open circuit condition on the indicator LED - * led-under-voltage - flash controller voltage to the flash + * led-under-voltage + flash controller voltage to the flash LED has been below the minimum limit specific to the flash - * controller-under-voltage - the input voltage of the flash + * controller-under-voltage + the input voltage of the flash controller is below the limit under which strobing the flash at full current will not be possible; the condition persists until this flag is no longer set - * led-over-temperature - the temperature of the LED has exceeded + * led-over-temperature + the temperature of the LED has exceeded its allowed upper limit diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 451af6d6768c..646540950e38 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -19,18 +19,23 @@ KernelVersion: 4.16 Contact: linux-leds@vger.kernel.org Description: Signal the link state of the named network device. + If set to 0 (default), the LED's normal state is off. + If set to 1, the LED's normal state reflects the link state of the named network device. Setting this value also immediately changes the LED state. + What: /sys/class/leds//tx Date: Dec 2017 KernelVersion: 4.16 Contact: linux-leds@vger.kernel.org Description: Signal transmission of data on the named network device. + If set to 0 (default), the LED will not blink on transmission. + If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. @@ -40,6 +45,8 @@ KernelVersion: 4.16 Contact: linux-leds@vger.kernel.org Description: Signal reception of data on the named network device. + If set to 0 (default), the LED will not blink on reception. + If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport index f440e690daef..eb81152b8348 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport @@ -8,5 +8,6 @@ Description: selected for the USB port trigger. Selecting ports makes trigger observing them for any connected devices and lighting on LED if there are any. + Echoing "1" value selects USB port. Echoing "0" unselects it. Current state can be also read. diff --git a/Documentation/ABI/testing/sysfs-class-leds-gt683r b/Documentation/ABI/testing/sysfs-class-leds-gt683r index 6adab27f646e..b57ffb26e722 100644 --- a/Documentation/ABI/testing/sysfs-class-leds-gt683r +++ b/Documentation/ABI/testing/sysfs-class-leds-gt683r @@ -7,9 +7,11 @@ Description: of one LED will update the mode of its two sibling devices as well. Possible values are: - 0 - normal - 1 - audio - 2 - breathing + == ========= + 0 normal + 1 audio + 2 breathing + == ========= Normal: LEDs are fully on when enabled Audio: LEDs brightness depends on sound level diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index 3b404577f380..7670012ae9b6 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -4,10 +4,13 @@ KernelVersion: 3.17 Contact: netdev@vger.kernel.org Description: Indicates the name assignment type. Possible values are: - 1: enumerated by the kernel, possibly in an unpredictable way - 2: predictably named by the kernel - 3: named by userspace - 4: renamed + + == ========================================================== + 1 enumerated by the kernel, possibly in an unpredictable way + 2 predictably named by the kernel + 3 named by userspace + 4 renamed + == ========================================================== What: /sys/class/net//addr_assign_type Date: July 2010 @@ -15,10 +18,13 @@ KernelVersion: 3.2 Contact: netdev@vger.kernel.org Description: Indicates the address assignment type. Possible values are: - 0: permanent address - 1: randomly generated - 2: stolen from another device - 3: set using dev_set_mac_address + + == ============================= + 0 permanent address + 1 randomly generated + 2 stolen from another device + 3 set using dev_set_mac_address + == ============================= What: /sys/class/net//addr_len Date: April 2005 @@ -51,9 +57,12 @@ Description: Default value 0 does not forward any link local frames. Restricted bits: - 0: 01-80-C2-00-00-00 Bridge Group Address used for STP - 1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE - 2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad + + == ======================================================== + 0 01-80-C2-00-00-00 Bridge Group Address used for STP + 1 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE + 2 01-80-C2-00-00-02 (Link Aggregation) 802.3ad + == ======================================================== Any values not setting these bits can be used. Take special care when forwarding control frames e.g. 802.1X-PAE or LLDP. @@ -74,8 +83,11 @@ Contact: netdev@vger.kernel.org Description: Indicates the current physical link state of the interface. Posssible values are: - 0: physical link is down - 1: physical link is up + + == ===================== + 0 physical link is down + 1 physical link is up + == ===================== Note: some special devices, e.g: bonding and team drivers will allow this attribute to be written to force a link state for @@ -131,8 +143,11 @@ Contact: netdev@vger.kernel.org Description: Indicates whether the interface is under test. Possible values are: - 0: interface is not being tested - 1: interface is being tested + + == ============================= + 0 interface is not being tested + 1 interface is being tested + == ============================= When an interface is under test, it cannot be expected to pass packets as normal. @@ -144,8 +159,11 @@ Contact: netdev@vger.kernel.org Description: Indicates the interface latest or current duplex value. Possible values are: - half: half duplex - full: full duplex + + ==== =========== + half half duplex + full full duplex + ==== =========== Note: This attribute is only valid for interfaces that implement the ethtool get_link_ksettings method (mostly Ethernet). @@ -196,8 +214,11 @@ Description: Indicates the interface link mode, as a decimal number. This attribute should be used in conjunction with 'dormant' attribute to determine the interface usability. Possible values: - 0: default link mode - 1: dormant link mode + + == ================= + 0 default link mode + 1 dormant link mode + == ================= What: /sys/class/net//mtu Date: April 2005 @@ -226,7 +247,9 @@ KernelVersion: 2.6.17 Contact: netdev@vger.kernel.org Description: Indicates the interface RFC2863 operational state as a string. + Possible values are: + "unknown", "notpresent", "down", "lowerlayerdown", "testing", "dormant", "up". diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm index f7be0e88b139..06416d0e163d 100644 --- a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm +++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm @@ -91,9 +91,9 @@ Date: May 2014 KernelVersion: 3.16 Contact: Bjørn Mork Description: - Bit 0: 16-bit NTB supported (set to 1) - Bit 1: 32-bit NTB supported - Bits 2 – 15: reserved (reset to zero; must be ignored by host) + - Bit 0: 16-bit NTB supported (set to 1) + - Bit 1: 32-bit NTB supported + - Bits 2 – 15: reserved (reset to zero; must be ignored by host) What: /sys/class/net//cdc_ncm/dwNtbInMaxSize Date: May 2014 diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev index 206cbf538b59..40ced0ea4316 100644 --- a/Documentation/ABI/testing/sysfs-class-net-phydev +++ b/Documentation/ABI/testing/sysfs-class-net-phydev @@ -35,7 +35,9 @@ Description: Ethernet driver during bus enumeration, encoded in string. This interface mode is used to configure the Ethernet MAC with the appropriate mode for its data lines to the PHY hardware. + Possible values are: + (not available), mii, gmii, sgmii, tbi, rev-mii, rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui, diff --git a/Documentation/ABI/testing/sysfs-class-pktcdvd b/Documentation/ABI/testing/sysfs-class-pktcdvd index dde4f26d0780..ba1ce626591d 100644 --- a/Documentation/ABI/testing/sysfs-class-pktcdvd +++ b/Documentation/ABI/testing/sysfs-class-pktcdvd @@ -11,15 +11,17 @@ KernelVersion: 2.6.20 Contact: Thomas Maier Description: - add: (WO) Write a block device id (major:minor) to + ========== ============================================== + add (WO) Write a block device id (major:minor) to create a new pktcdvd device and map it to the block device. - remove: (WO) Write the pktcdvd device id (major:minor) + remove (WO) Write the pktcdvd device id (major:minor) to remove the pktcdvd device. - device_map: (RO) Shows the device mapping in format: + device_map (RO) Shows the device mapping in format: pktcdvd[0-7] + ========== ============================================== What: /sys/class/pktcdvd/pktcdvd[0-7]/dev @@ -65,29 +67,31 @@ Date: Oct. 2006 KernelVersion: 2.6.20 Contact: Thomas Maier Description: - size: (RO) Contains the size of the bio write queue. + ============== ================================================ + size (RO) Contains the size of the bio write queue. - congestion_off: (RW) If bio write queue size is below this mark, + congestion_off (RW) If bio write queue size is below this mark, accept new bio requests from the block layer. - congestion_on: (RW) If bio write queue size is higher as this + congestion_on (RW) If bio write queue size is higher as this mark, do no longer accept bio write requests from the block layer and wait till the pktcdvd device has processed enough bio's so that bio write queue size is below congestion off mark. A value of <= 0 disables congestion control. + ============== ================================================ Example: -------- -To use the pktcdvd sysfs interface directly, you can do: +To use the pktcdvd sysfs interface directly, you can do:: -# create a new pktcdvd device mapped to /dev/hdc -echo "22:0" >/sys/class/pktcdvd/add -cat /sys/class/pktcdvd/device_map -# assuming device pktcdvd0 was created, look at stat's -cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written -# print the device id of the mapped block device -fgrep pktcdvd0 /sys/class/pktcdvd/device_map -# remove device, using pktcdvd0 device id 253:0 -echo "253:0" >/sys/class/pktcdvd/remove + # create a new pktcdvd device mapped to /dev/hdc + echo "22:0" >/sys/class/pktcdvd/add + cat /sys/class/pktcdvd/device_map + # assuming device pktcdvd0 was created, look at stat's + cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written + # print the device id of the mapped block device + fgrep pktcdvd0 /sys/class/pktcdvd/device_map + # remove device, using pktcdvd0 device id 253:0 + echo "253:0" >/sys/class/pktcdvd/remove diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index d4319a04c302..d68ad528a8e5 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -43,7 +43,9 @@ Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Fine grain representation of battery capacity. + Access: Read + Valid values: 0 - 100 (percent) What: /sys/class/power_supply//capacity_alert_max @@ -58,6 +60,7 @@ Description: low). Access: Read, Write + Valid values: 0 - 100 (percent) What: /sys/class/power_supply//capacity_alert_min @@ -88,6 +91,7 @@ Description: completely useless. Access: Read + Valid values: 0 - 100 (percent) What: /sys/class/power_supply//capacity_level @@ -111,6 +115,7 @@ Description: which they average readings to smooth out the reported value. Access: Read + Valid values: Represented in microamps. Negative values are used for discharging batteries, positive values for charging batteries. @@ -131,6 +136,7 @@ Description: This value is not averaged/smoothed. Access: Read + Valid values: Represented in microamps. Negative values are used for discharging batteries, positive values for charging batteries. @@ -383,7 +389,7 @@ Description: **USB Properties** -What: /sys/class/power_supply//current_avg +What: /sys/class/power_supply//current_avg Date: May 2007 Contact: linux-pm@vger.kernel.org Description: @@ -449,6 +455,7 @@ Description: solved using power limit use input_voltage_limit. Access: Read, Write + Valid values: Represented in microvolts What: /sys/class/power_supply//input_power_limit @@ -462,6 +469,7 @@ Description: limit only for problems that can be solved using power limit. Access: Read, Write + Valid values: Represented in microwatts What: /sys/class/power_supply//online, @@ -747,6 +755,7 @@ Description: manufactured. Access: Read + Valid values: Reported as integer What: /sys/class/power_supply//manufacture_month @@ -756,6 +765,7 @@ Description: Reports the month when the device has been manufactured. Access: Read + Valid values: 1-12 What: /sys/class/power_supply//manufacture_day diff --git a/Documentation/ABI/testing/sysfs-class-power-mp2629 b/Documentation/ABI/testing/sysfs-class-power-mp2629 index 327a07e22805..914d67caac0d 100644 --- a/Documentation/ABI/testing/sysfs-class-power-mp2629 +++ b/Documentation/ABI/testing/sysfs-class-power-mp2629 @@ -5,4 +5,5 @@ Description: Represents a battery impedance compensation to accelerate charging. Access: Read, Write + Valid values: Represented in milli-ohms. Valid range is [0, 140]. diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030 index 7ac36dba87bc..b52f7023f8ba 100644 --- a/Documentation/ABI/testing/sysfs-class-power-twl4030 +++ b/Documentation/ABI/testing/sysfs-class-power-twl4030 @@ -6,9 +6,9 @@ Description: Possible values are: ============= =========================================== - "auto" draw power as appropriate for detected + "auto" draw power as appropriate for detected power source and battery status. - "off" do not draw any power. + "off" do not draw any power. "continuous" activate mode described as "linear" in TWL data sheets. This uses whatever current is available and doesn't switch off diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio index 8716beeb16c1..19aefb21b639 100644 --- a/Documentation/ABI/testing/sysfs-class-rapidio +++ b/Documentation/ABI/testing/sysfs-class-rapidio @@ -6,6 +6,7 @@ Description: The /sys/class/rapidio_port subdirectory contains individual subdirectories named as "rapidioN" where N = mport ID registered with RapidIO subsystem. + NOTE: An mport ID is not a RapidIO destination ID assigned to a given local mport device. @@ -16,7 +17,9 @@ Contact: Matt Porter , Alexandre Bounine Description: (RO) reports RapidIO common transport system size: + 0 = small (8-bit destination ID, max. 256 devices), + 1 = large (16-bit destination ID, max. 65536 devices). What: /sys/class/rapidio_port/rapidioN/port_destid @@ -25,31 +28,32 @@ KernelVersion: v3.15 Contact: Matt Porter , Alexandre Bounine Description: - (RO) reports RapidIO destination ID assigned to the given - RapidIO mport device. If value 0xFFFFFFFF is returned this means - that no valid destination ID have been assigned to the mport - (yet). Normally, before enumeration/discovery have been executed - only fabric enumerating mports have a valid destination ID - assigned to them using "hdid=..." rapidio module parameter. + +(RO) reports RapidIO destination ID assigned to the given +RapidIO mport device. If value 0xFFFFFFFF is returned this means +that no valid destination ID have been assigned to the mport +(yet). Normally, before enumeration/discovery have been executed +only fabric enumerating mports have a valid destination ID +assigned to them using "hdid=..." rapidio module parameter. After enumeration or discovery was performed for a given mport device, the corresponding subdirectory will also contain subdirectories for each child RapidIO device connected to the mport. The example below shows mport device subdirectory with several child RapidIO -devices attached to it. +devices attached to it:: -[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l -total 0 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 -lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 --r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid -drwxr-xr-x 2 root root 0 Feb 11 15:11 power -lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port --r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size --rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent + [rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l + total 0 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 + lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 + -r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid + drwxr-xr-x 2 root root 0 Feb 11 15:11 power + lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port + -r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size + -rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index bc578bc60628..8516f08806dd 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -35,13 +35,13 @@ Description: This will be one of the following strings: - off - on - error - fast - normal - idle - standby + - off + - on + - error + - fast + - normal + - idle + - standby "off" means the regulator is not supplying power to the system. @@ -74,9 +74,9 @@ Description: This will be one of the following strings: - 'voltage' - 'current' - 'unknown' + - 'voltage' + - 'current' + - 'unknown' 'voltage' means the regulator output voltage can be controlled by software. @@ -129,11 +129,11 @@ Description: The opmode value can be one of the following strings: - 'fast' - 'normal' - 'idle' - 'standby' - 'unknown' + - 'fast' + - 'normal' + - 'idle' + - 'standby' + - 'unknown' The modes are described in include/linux/regulator/consumer.h @@ -360,9 +360,9 @@ Description: This will be one of the following strings: - 'enabled' - 'disabled' - 'unknown' + - 'enabled' + - 'disabled' + - 'unknown' 'enabled' means the regulator is in bypass mode. diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc index 066b9b6f4924..0c9ee55098b8 100644 --- a/Documentation/ABI/testing/sysfs-class-remoteproc +++ b/Documentation/ABI/testing/sysfs-class-remoteproc @@ -16,11 +16,11 @@ Description: Remote processor state Reports the state of the remote processor, which will be one of: - "offline" - "suspended" - "running" - "crashed" - "invalid" + - "offline" + - "suspended" + - "running" + - "crashed" + - "invalid" "offline" means the remote processor is powered off. @@ -38,8 +38,8 @@ Description: Remote processor state Writing this file controls the state of the remote processor. The following states can be written: - "start" - "stop" + - "start" + - "stop" Writing "start" will attempt to start the processor running the firmware indicated by, or written to, diff --git a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration index ec950c93e5c6..ee8ed6494a01 100644 --- a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration +++ b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration @@ -7,6 +7,7 @@ Description: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock calibrate the AB8500.s 32KHz Real Time Clock. Every 60 seconds the AB8500 will correct the RTC's value by adding to it the value of this attribute. + The range of the attribute is -127 to +127 in units of 30.5 micro-seconds (half-parts-per-million of the 32KHz clock) Users: The /vendor/st-ericsson/base_utilities/core/rtc_calibration diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc index a0578751c1e3..6c5dcad21e19 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -66,11 +66,14 @@ Description: [] to start (or stop) scanning on a channel. is one of: - 0 - scan - 1 - scan outside BP - 2 - scan while inactive - 3 - scanning disabled - 4 - scan (with start time of ) + + == ======================================= + 0 scan + 1 scan outside BP + 2 scan while inactive + 3 scanning disabled + 4 scan (with start time of ) + == ======================================= What: /sys/class/uwb_rc/uwbN/mac_address Date: July 2008 diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog index 9860a8b2ba75..585caecda3a5 100644 --- a/Documentation/ABI/testing/sysfs-class-watchdog +++ b/Documentation/ABI/testing/sysfs-class-watchdog @@ -91,10 +91,13 @@ Description: h/w strapping (for WDT2 only). At alternate flash the 'access_cs0' sysfs node provides: - ast2400: a way to get access to the primary SPI flash + + ast2400: + a way to get access to the primary SPI flash chip at CS0 after booting from the alternate chip at CS1. - ast2500: a way to restore the normal address mapping + ast2500: + a way to restore the normal address mapping from (CS0->CS1, CS1->CS0) to (CS0->CS0, CS1->CS1). diff --git a/Documentation/ABI/testing/sysfs-dev b/Documentation/ABI/testing/sysfs-dev index a9f2b8b0530f..d1739063e762 100644 --- a/Documentation/ABI/testing/sysfs-dev +++ b/Documentation/ABI/testing/sysfs-dev @@ -9,9 +9,10 @@ Description: The /sys/dev tree provides a method to look up the sysfs the form ":". These links point to the corresponding sysfs path for the given device. - Example: - $ readlink /sys/dev/block/8:32 - ../../block/sdc + Example:: + + $ readlink /sys/dev/block/8:32 + ../../block/sdc Entries in /sys/dev/char and /sys/dev/block will be dynamically created and destroyed as devices enter and diff --git a/Documentation/ABI/testing/sysfs-devices-mapping b/Documentation/ABI/testing/sysfs-devices-mapping index 490ccfd67f12..8d202bac9394 100644 --- a/Documentation/ABI/testing/sysfs-devices-mapping +++ b/Documentation/ABI/testing/sysfs-devices-mapping @@ -8,26 +8,27 @@ Description: block. For example, on 4-die Xeon platform with up to 6 IIO stacks per die and, therefore, 6 IIO PMON blocks per die, the mapping of - IIO PMON block 0 exposes as the following: + IIO PMON block 0 exposes as the following:: - $ ls /sys/devices/uncore_iio_0/die* - -r--r--r-- /sys/devices/uncore_iio_0/die0 - -r--r--r-- /sys/devices/uncore_iio_0/die1 - -r--r--r-- /sys/devices/uncore_iio_0/die2 - -r--r--r-- /sys/devices/uncore_iio_0/die3 + $ ls /sys/devices/uncore_iio_0/die* + -r--r--r-- /sys/devices/uncore_iio_0/die0 + -r--r--r-- /sys/devices/uncore_iio_0/die1 + -r--r--r-- /sys/devices/uncore_iio_0/die2 + -r--r--r-- /sys/devices/uncore_iio_0/die3 - $ tail /sys/devices/uncore_iio_0/die* - ==> /sys/devices/uncore_iio_0/die0 <== - 0000:00 - ==> /sys/devices/uncore_iio_0/die1 <== - 0000:40 - ==> /sys/devices/uncore_iio_0/die2 <== - 0000:80 - ==> /sys/devices/uncore_iio_0/die3 <== - 0000:c0 + $ tail /sys/devices/uncore_iio_0/die* + ==> /sys/devices/uncore_iio_0/die0 <== + 0000:00 + ==> /sys/devices/uncore_iio_0/die1 <== + 0000:40 + ==> /sys/devices/uncore_iio_0/die2 <== + 0000:80 + ==> /sys/devices/uncore_iio_0/die3 <== + 0000:c0 - Which means: - IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000 - IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000 - IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000 - IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000 + Which means:: + + IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000 + IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000 + IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000 + IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000 diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index deef3b5723cf..2da2b1fba2c1 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -47,16 +47,19 @@ Description: online/offline state of the memory section. When written, root can toggle the the online/offline state of a removable memory section (see removable file description above) - using the following commands. - # echo online > /sys/devices/system/memory/memoryX/state - # echo offline > /sys/devices/system/memory/memoryX/state + using the following commands:: + + # echo online > /sys/devices/system/memory/memoryX/state + # echo offline > /sys/devices/system/memory/memoryX/state For example, if /sys/devices/system/memory/memory22/removable contains a value of 1 and /sys/devices/system/memory/memory22/state contains the string "online" the following command can be executed by - by root to offline that section. - # echo offline > /sys/devices/system/memory/memory22/state + by root to offline that section:: + + # echo offline > /sys/devices/system/memory/memory22/state + Users: hotplug memory remove tools http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils @@ -78,6 +81,7 @@ Description: For example, the following symbolic link is created for memory section 9 on node0: + /sys/devices/system/memory/memory9/node0 -> ../../node/node0 @@ -90,4 +94,5 @@ Description: points to the corresponding /sys/devices/system/memory/memoryY memory section directory. For example, the following symbolic link is created for memory section 9 on node0. + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget index d548eaac230a..40f29a01fd14 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget +++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget @@ -3,8 +3,9 @@ Date: April 2010 Contact: Fabien Chouteau Description: Show the suspend state of an USB composite gadget. - 1 -> suspended - 0 -> resumed + + - 1 -> suspended + - 0 -> resumed (_UDC_ is the name of the USB Device Controller driver) @@ -17,5 +18,6 @@ Description: Storage mode. Possible values are: - 1 -> ignore the FUA flag - 0 -> obey the FUA flag + + - 1 -> ignore the FUA flag + - 0 -> obey the FUA flag diff --git a/Documentation/ABI/testing/sysfs-devices-platform-ipmi b/Documentation/ABI/testing/sysfs-devices-platform-ipmi index afb5db856e1c..07df0ddc0b69 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-ipmi +++ b/Documentation/ABI/testing/sysfs-devices-platform-ipmi @@ -123,38 +123,40 @@ KernelVersion: v4.15 Contact: openipmi-developer@lists.sourceforge.net Description: - idles: (RO) Number of times the interface was + ====================== ======================================== + idles (RO) Number of times the interface was idle while being polled. - watchdog_pretimeouts: (RO) Number of watchdog pretimeouts. + watchdog_pretimeouts (RO) Number of watchdog pretimeouts. - complete_transactions: (RO) Number of completed messages. + complete_transactions (RO) Number of completed messages. - events: (RO) Number of IPMI events received from + events (RO) Number of IPMI events received from the hardware. - interrupts: (RO) Number of interrupts the driver + interrupts (RO) Number of interrupts the driver handled. - hosed_count: (RO) Number of times the hardware didn't + hosed_count (RO) Number of times the hardware didn't follow the state machine. - long_timeouts: (RO) Number of times the driver + long_timeouts (RO) Number of times the driver requested a timer while nothing was in progress. - flag_fetches: (RO) Number of times the driver + flag_fetches (RO) Number of times the driver requested flags from the hardware. - attentions: (RO) Number of time the driver got an + attentions (RO) Number of time the driver got an ATTN from the hardware. - incoming_messages: (RO) Number of asynchronous messages + incoming_messages (RO) Number of asynchronous messages received. - short_timeouts: (RO) Number of times the driver + short_timeouts (RO) Number of times the driver requested a timer while an operation was in progress. + ====================== ======================================== What: /sys/devices/platform/ipmi_si.*/interrupts_enabled @@ -201,38 +203,40 @@ Date: Sep, 2017 KernelVersion: v4.15 Contact: openipmi-developer@lists.sourceforge.net Description: - hosed: (RO) Number of times the hardware didn't + ====================== ======================================== + hosed (RO) Number of times the hardware didn't follow the state machine. - alerts: (RO) Number of alerts received. + alerts (RO) Number of alerts received. - sent_messages: (RO) Number of total messages sent. + sent_messages (RO) Number of total messages sent. - sent_message_parts: (RO) Number of message parts sent. + sent_message_parts (RO) Number of message parts sent. Messages may be broken into parts if they are long. - received_messages: (RO) Number of message responses + received_messages (RO) Number of message responses received. - received_message_parts: (RO) Number of message fragments + received_message_parts (RO) Number of message fragments received. - events: (RO) Number of received events. + events (RO) Number of received events. - watchdog_pretimeouts: (RO) Number of watchdog pretimeouts. + watchdog_pretimeouts (RO) Number of watchdog pretimeouts. - flag_fetches: (RO) Number of times a flag fetch was + flag_fetches (RO) Number of times a flag fetch was requested. - send_retries: (RO) Number of time a message was + send_retries (RO) Number of time a message was retried. - receive_retries: (RO) Number of times the receive of a + receive_retries (RO) Number of times the receive of a message was retried. - send_errors: (RO) Number of times the send of a + send_errors (RO) Number of times the send of a message failed. - receive_errors: (RO) Number of errors in receiving + receive_errors (RO) Number of errors in receiving messages. + ====================== ======================================== diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 274c337ec6a9..1a04ca8162ad 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -169,7 +169,7 @@ Description: observed CPU idle duration was too short for it (a count). - below: (RO) Number of times this state was entered, but the + below: (RO) Number of times this state was entered, but the observed CPU idle duration was too long for it (a count). ======== ==== ================================================= @@ -601,7 +601,7 @@ Description: Secure Virtual Machine Facility in POWER9 and newer processors. i.e., it is a Secure Virtual Machine. -What: /sys/devices/system/cpu/cpuX/purr +What: /sys/devices/system/cpu/cpuX/purr Date: Apr 2005 Contact: Linux for PowerPC mailing list Description: PURR ticks for this CPU since the system boot. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-lenovo b/Documentation/ABI/testing/sysfs-driver-hid-lenovo index 53a0725962e1..aee85ca1f6be 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-lenovo +++ b/Documentation/ABI/testing/sysfs-driver-hid-lenovo @@ -3,14 +3,18 @@ Date: July 2011 Contact: linux-input@vger.kernel.org Description: This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be is being controlled by press_speed. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./dragging Date: July 2011 Contact: linux-input@vger.kernel.org Description: If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./release_to_select @@ -25,7 +29,9 @@ Date: July 2011 Contact: linux-input@vger.kernel.org Description: This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate a left or right mouse button click. + Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./sensitivity @@ -39,12 +45,16 @@ What: /sys/bus/usb/devices/-:./-:./::./fn_lock Date: July 2014 Contact: linux-input@vger.kernel.org Description: This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1) + Values are 0 or 1 + Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-ntrig b/Documentation/ABI/testing/sysfs-driver-hid-ntrig index e574a5625efe..0e323a5cec6c 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-ntrig +++ b/Documentation/ABI/testing/sysfs-driver-hid-ntrig @@ -29,12 +29,13 @@ Contact: linux-input@vger.kernel.org Description: Threholds to override activation slack. - activation_width: (RW) Width threshold to immediately + ================= ===================================== + activation_width (RW) Width threshold to immediately start processing touch events. - activation_height: (RW) Height threshold to immediately + activation_height (RW) Height threshold to immediately start processing touch events. - + ================= ===================================== What: /sys/bus/hid/drivers/ntrig//min_width What: /sys/bus/hid/drivers/ntrig//min_height @@ -44,11 +45,13 @@ Contact: linux-input@vger.kernel.org Description: Minimum size contact accepted. - min_width: (RW) Minimum touch contact width to decide + ========== =========================================== + min_width (RW) Minimum touch contact width to decide activation and activity. - min_height: (RW) Minimum touch contact height to decide + min_height (RW) Minimum touch contact height to decide activation and activity. + ========== =========================================== What: /sys/bus/hid/drivers/ntrig//sensor_physical_width diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index 8f7982c70d72..11cd9bf0ad18 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -3,17 +3,21 @@ Date: March 2010 Contact: Stefan Achatz Description: It is possible to switch the dpi setting of the mouse with the press of a button. + When read, this file returns the raw number of the actual dpi setting reported by the mouse. This number has to be further processed to receive the real dpi value: + ===== ===== VALUE DPI + ===== ===== 1 800 2 1200 3 1600 4 2000 5 2400 6 3200 + ===== ===== This file is readonly. Users: http://roccat.sourceforge.net @@ -22,6 +26,7 @@ What: /sys/bus/usb/devices/-:./ Description: When read, this file returns the number of the actual profile. + This file is readonly. Users: http://roccat.sourceforge.net @@ -33,6 +38,7 @@ Description: When read, this file returns the raw integer version number of the further usage in other programs. To receive the real version number the decimal point has to be shifted 2 positions to the left. E.g. a returned value of 138 means 1.38 + This file is readonly. Users: http://roccat.sourceforge.net @@ -43,10 +49,13 @@ Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile holds information like button mappings, sensitivity, the colors of the 5 leds and light effects. + When read, these files return the respective profile. The returned data is 975 bytes in size. + When written, this file lets one write the respective profile data back to the mouse. The data has to be 975 bytes long. + The mouse will reject invalid data, whereas the profile number stored in the profile doesn't need to fit the number of the store. @@ -58,6 +67,7 @@ Contact: Stefan Achatz Description: When read, this file returns the settings stored in the mouse. The size of the data is 36 bytes and holds information like the startup_profile, tcu state and calibration_data. + When written, this file lets write settings back to the mouse. The data has to be 36 bytes long. The mouse will reject invalid data. @@ -67,8 +77,10 @@ What: /sys/bus/usb/devices/-:./ Description: The integer value of this attribute ranges from 1 to 5. + When read, this attribute returns the number of the profile that's active when the mouse is powered on. + When written, this file sets the number of the startup profile and the mouse activates this profile immediately. Users: http://roccat.sourceforge.net @@ -80,9 +92,12 @@ Description: The mouse has a "Tracking Control Unit" which lets the user calibrate the laser power to fit the mousepad surface. When read, this file returns the current state of the TCU, where 0 means off and 1 means on. + Writing 0 in this file will switch the TCU off. + Writing 1 in this file will start the calibration which takes around 6 seconds to complete and activates the TCU. + Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/-:./::./kone/roccatkone/weight @@ -93,14 +108,18 @@ Description: The mouse can be equipped with one of four supplied weights and its value can be read out. When read, this file returns the raw value returned by the mouse which eases further processing in other software. + The values map to the weights as follows: + ===== ====== VALUE WEIGHT + ===== ====== 0 none 1 5g 2 10g 3 15g 4 20g + ===== ====== This file is readonly. Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote index cd7b82a5c27d..3bf43d9dcdfe 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote +++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote @@ -20,6 +20,7 @@ Description: This file contains the currently connected and initialized the official Nintendo Nunchuck extension and classic is the Nintendo Classic Controller extension. The motionp extension can be combined with the other two. + Starting with kernel-version 3.11 Motion Plus hotplugging is supported and if detected, it's no longer reported as static extension. You will get uevent notifications for the motion-plus diff --git a/Documentation/ABI/testing/sysfs-driver-input-exc3000 b/Documentation/ABI/testing/sysfs-driver-input-exc3000 index 3d316d54f81c..cd7c578aef2c 100644 --- a/Documentation/ABI/testing/sysfs-driver-input-exc3000 +++ b/Documentation/ABI/testing/sysfs-driver-input-exc3000 @@ -4,6 +4,7 @@ Contact: linux-input@vger.kernel.org Description: Reports the firmware version provided by the touchscreen, for example "00_T6" on a EXC80H60 Access: Read + Valid values: Represented as string What: /sys/bus/i2c/devices/xxx/model @@ -12,4 +13,5 @@ Contact: linux-input@vger.kernel.org Description: Reports the model identification provided by the touchscreen, for example "Orion_1320" on a EXC80H60 Access: Read + Valid values: Represented as string diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse index bb6f5d6ceea0..4cf595d681e6 100644 --- a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse +++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse @@ -4,7 +4,9 @@ Contact: PrasannaKumar Muralidharan Description: read-only access to the efuse on the Ingenic JZ4780 SoC The SoC has a one time programmable 8K efuse that is split into segments. The driver supports read only. - The segments are + The segments are: + + ===== ======== ================= 0x000 64 bit Random Number 0x008 128 bit Ingenic Chip ID 0x018 128 bit Customer ID @@ -12,5 +14,7 @@ Description: read-only access to the efuse on the Ingenic JZ4780 SoC 0x1E0 8 bit Protect Segment 0x1E1 2296 bit HDMI Key 0x300 2048 bit Security boot key + ===== ======== ================= + Users: any user space application which wants to read the Chip and Customer ID diff --git a/Documentation/ABI/testing/sysfs-driver-pciback b/Documentation/ABI/testing/sysfs-driver-pciback index 73308c2b81b0..49f5fd0c8bbd 100644 --- a/Documentation/ABI/testing/sysfs-driver-pciback +++ b/Documentation/ABI/testing/sysfs-driver-pciback @@ -7,8 +7,10 @@ Description: the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest to write and read from the PCI device. That is Domain:Bus: Device.Function-Register:Size:Mask (Domain is optional). - For example: - #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks + For example:: + + #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks + will allow the guest to read and write to the configuration register 0x0E. diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index d1a352194d2e..adc0d0e91607 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -18,6 +18,7 @@ Contact: Stanislav Nijnikov Description: This file shows the device type. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class @@ -26,6 +27,7 @@ Contact: Stanislav Nijnikov Description: This file shows the device class. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class @@ -34,6 +36,7 @@ Contact: Stanislav Nijnikov Description: This file shows the UFS storage subclass. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol @@ -43,6 +46,7 @@ Description: This file shows the protocol supported by an UFS device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns @@ -51,6 +55,7 @@ Contact: Stanislav Nijnikov Description: This file shows number of logical units. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns @@ -60,6 +65,7 @@ Description: This file shows number of well known logical units. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable @@ -69,6 +75,7 @@ Description: This file shows value that indicates whether the device is enabled for boot. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable @@ -79,6 +86,7 @@ Description: This file shows value that indicates whether the device of the boot sequence. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode @@ -88,6 +96,7 @@ Description: This file shows value that defines the power mode after device initialization or hardware reset. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun @@ -96,6 +105,7 @@ Contact: Stanislav Nijnikov Description: This file shows the high priority lun. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type @@ -104,6 +114,7 @@ Contact: Stanislav Nijnikov Description: This file shows the secure removal type. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun @@ -113,6 +124,7 @@ Description: This file shows whether the security lun is supported. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency @@ -122,6 +134,7 @@ Description: This file shows the background operations termination latency. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level @@ -130,6 +143,7 @@ Contact: Stanislav Nijnikov Description: This file shows the initial active ICC level. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version @@ -138,6 +152,7 @@ Contact: Stanislav Nijnikov Description: This file shows the specification version. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date @@ -147,6 +162,7 @@ Description: This file shows the manufacturing date in BCD format. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id @@ -155,6 +171,7 @@ Contact: Stanislav Nijnikov Description: This file shows the manufacturee ID. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability @@ -164,6 +181,7 @@ Description: This file shows the maximum number of outstanding RTTs supported by the device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update @@ -173,6 +191,7 @@ Description: This file shows the frequency and method of the realtime clock update. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features @@ -182,6 +201,7 @@ Description: This file shows which features are supported by the device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout @@ -190,6 +210,7 @@ Contact: Stanislav Nijnikov Description: This file shows the FFU timeout. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth @@ -198,6 +219,7 @@ Contact: Stanislav Nijnikov Description: This file shows the device queue depth. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version @@ -206,6 +228,7 @@ Contact: Stanislav Nijnikov Description: This file shows the device version. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa @@ -215,6 +238,7 @@ Description: This file shows number of secure write protect areas supported by the device. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size @@ -225,6 +249,7 @@ Description: This file shows the maximum amount of data that may be This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout @@ -234,6 +259,7 @@ Description: This file shows the command maximum timeout for a change in PSA state. This is one of the UFS device descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -244,6 +270,7 @@ Description: This file shows the MIPI UniPro version number in BCD format. This is one of the UFS interconnect descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version @@ -253,6 +280,7 @@ Description: This file shows the MIPI M-PHY version number in BCD format. This is one of the UFS interconnect descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -264,6 +292,7 @@ Description: This file shows the total memory quantity available to of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns @@ -273,6 +302,7 @@ Description: This file shows the maximum number of logical units supported by the UFS device. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size @@ -281,6 +311,7 @@ Contact: Stanislav Nijnikov Description: This file shows the segment size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size @@ -289,6 +320,7 @@ Contact: Stanislav Nijnikov Description: This file shows the allocation unit size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size @@ -298,6 +330,7 @@ Description: This file shows the minimum addressable block size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size @@ -307,6 +340,7 @@ Description: This file shows the optimal read block size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size @@ -316,6 +350,7 @@ Description: This file shows the optimal write block size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size @@ -325,6 +360,7 @@ Description: This file shows the maximum data-in buffer size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size @@ -334,6 +370,7 @@ Description: This file shows the maximum data-out buffer size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size @@ -343,6 +380,7 @@ Description: This file shows the maximum number of RPMB frames allowed in Security Protocol In/Out. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy @@ -352,6 +390,7 @@ Description: This file shows the dynamic capacity resource policy. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering @@ -361,6 +400,7 @@ Description: This file shows support for out-of-order data transfer. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts @@ -370,6 +410,7 @@ Description: This file shows maximum available number of contexts which are supported by the device. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size @@ -378,6 +419,7 @@ Contact: Stanislav Nijnikov Description: This file shows system data tag unit size. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size @@ -388,6 +430,7 @@ Description: This file shows maximum storage area size allocated by This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types @@ -397,6 +440,7 @@ Description: This file shows supported secure removal types. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types @@ -406,6 +450,7 @@ Description: This file shows supported memory types. This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units @@ -416,6 +461,7 @@ Description: This file shows the maximum number of allocation units for enhanced type 1-4). This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor @@ -426,6 +472,7 @@ Description: This file shows the memory capacity adjustment factor for enhanced type 1-4). This is one of the UFS geometry descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -436,6 +483,7 @@ Description: This file shows preend of life information. This is one of the UFS health descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a @@ -445,6 +493,7 @@ Description: This file shows indication of the device life time (method a). This is one of the UFS health descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b @@ -454,6 +503,7 @@ Description: This file shows indication of the device life time (method b). This is one of the UFS health descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -464,6 +514,7 @@ Description: This file shows maximum VCC, VCCQ and VCCQ2 value for active ICC levels from 0 to 15. This is one of the UFS power descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -473,6 +524,7 @@ Contact: Stanislav Nijnikov Description: This file contains a device manufactureer name string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name @@ -480,6 +532,7 @@ Date: February 2018 Contact: Stanislav Nijnikov Description: This file contains a product name string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id @@ -487,6 +540,7 @@ Date: February 2018 Contact: Stanislav Nijnikov Description: This file contains a OEM ID string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number @@ -495,6 +549,7 @@ Contact: Stanislav Nijnikov Description: This file contains a device serial number string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision @@ -503,6 +558,7 @@ Contact: Stanislav Nijnikov Description: This file contains a product revision string. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -512,6 +568,7 @@ Contact: Stanislav Nijnikov Description: This file shows boot LUN information. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect @@ -520,6 +577,7 @@ Contact: Stanislav Nijnikov Description: This file shows LUN write protection status. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth @@ -528,6 +586,7 @@ Contact: Stanislav Nijnikov Description: This file shows LUN queue depth. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive @@ -536,6 +595,7 @@ Contact: Stanislav Nijnikov Description: This file shows PSA sensitivity. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type @@ -544,6 +604,7 @@ Contact: Stanislav Nijnikov Description: This file shows LUN memory type. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability @@ -553,6 +614,7 @@ Description: This file defines the device behavior when a power failure occurs during a write operation. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size @@ -562,6 +624,7 @@ Description: This file shows the size of addressable logical blocks (calculated as an exponent with base 2). This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count @@ -571,6 +634,7 @@ Description: This file shows total number of addressable logical blocks. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size @@ -579,6 +643,7 @@ Contact: Stanislav Nijnikov Description: This file shows the erase block size. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type @@ -587,6 +652,7 @@ Contact: Stanislav Nijnikov Description: This file shows the thin provisioning type. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count @@ -595,6 +661,7 @@ Contact: Stanislav Nijnikov Description: This file shows the total physical memory resources. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities @@ -603,6 +670,7 @@ Contact: Stanislav Nijnikov Description: This file shows the context capabilities. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity @@ -611,6 +679,7 @@ Contact: Stanislav Nijnikov Description: This file shows the granularity of the LUN. This is one of the UFS unit descriptor parameters. The full information about the descriptor could be found at UFS specifications 2.1. + The file is read only. @@ -619,6 +688,7 @@ Date: February 2018 Contact: Stanislav Nijnikov Description: This file shows the device init status. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe @@ -627,6 +697,7 @@ Contact: Stanislav Nijnikov Description: This file shows whether permanent write protection is enabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe @@ -636,6 +707,7 @@ Description: This file shows whether write protection is enabled on all logical units configured as power on write protected. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable @@ -644,6 +716,7 @@ Contact: Stanislav Nijnikov Description: This file shows whether the device background operations are enabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable @@ -652,6 +725,7 @@ Contact: Stanislav Nijnikov Description: This file shows whether the device life span mode is enabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal @@ -660,6 +734,7 @@ Contact: Stanislav Nijnikov Description: This file shows whether physical resource removal is enable. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc @@ -668,6 +743,7 @@ Contact: Stanislav Nijnikov Description: This file shows whether the device is executing internal operation related to real time clock. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update @@ -676,6 +752,7 @@ Contact: Stanislav Nijnikov Description: This file shows whether the device FW update is permanently disabled. The full information about the flag could be found at UFS specifications 2.1. + The file is read only. @@ -685,6 +762,7 @@ Contact: Stanislav Nijnikov Description: This file provides the boot lun enabled UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode @@ -693,6 +771,7 @@ Contact: Stanislav Nijnikov Description: This file provides the current power mode UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level @@ -701,6 +780,7 @@ Contact: Stanislav Nijnikov Description: This file provides the active icc level UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled @@ -709,6 +789,7 @@ Contact: Stanislav Nijnikov Description: This file provides the out of order data transfer enabled UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status @@ -717,6 +798,7 @@ Contact: Stanislav Nijnikov Description: This file provides the background operations status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status @@ -725,6 +807,7 @@ Contact: Stanislav Nijnikov Description: This file provides the purge operation status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size @@ -733,6 +816,7 @@ Contact: Stanislav Nijnikov Description: This file shows the maximum data size in a DATA IN UPIU. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size @@ -741,6 +825,7 @@ Contact: Stanislav Nijnikov Description: This file shows the maximum number of bytes that can be requested with a READY TO TRANSFER UPIU. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency @@ -749,6 +834,7 @@ Contact: Stanislav Nijnikov Description: This file provides the reference clock frequency UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock @@ -765,6 +851,7 @@ Description: This file provides the maximum current number of outstanding RTTs in device that is allowed. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control @@ -773,6 +860,7 @@ Contact: Stanislav Nijnikov Description: This file provides the exception event control UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status @@ -781,6 +869,7 @@ Contact: Stanislav Nijnikov Description: This file provides the exception event status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status @@ -789,6 +878,7 @@ Contact: Stanislav Nijnikov Description: This file provides the ffu status UFS device attribute. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state @@ -796,6 +886,7 @@ Date: February 2018 Contact: Stanislav Nijnikov Description: This file show the PSA feature status. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size @@ -805,6 +896,7 @@ Description: This file shows the amount of data that the host plans to load to all logical units in pre-soldering state. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. @@ -815,6 +907,7 @@ Description: This file shows the The amount of physical memory needed to be removed from the physical memory resources pool of the particular logical unit. The full information about the attribute could be found at UFS specifications 2.1. + The file is read only. @@ -824,24 +917,28 @@ Contact: Subhash Jadavani Description: This entry could be used to set or show the UFS device runtime power management level. The current driver implementation supports 6 levels with next target states: - 0 - an UFS device will stay active, an UIC link will - stay active - 1 - an UFS device will stay active, an UIC link will - hibernate - 2 - an UFS device will moved to sleep, an UIC link will - stay active - 3 - an UFS device will moved to sleep, an UIC link will - hibernate - 4 - an UFS device will be powered off, an UIC link will - hibernate - 5 - an UFS device will be powered off, an UIC link will - be powered off + + == ==================================================== + 0 an UFS device will stay active, an UIC link will + stay active + 1 an UFS device will stay active, an UIC link will + hibernate + 2 an UFS device will moved to sleep, an UIC link will + stay active + 3 an UFS device will moved to sleep, an UIC link will + hibernate + 4 an UFS device will be powered off, an UIC link will + hibernate + 5 an UFS device will be powered off, an UIC link will + be powered off + == ==================================================== What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state Date: February 2018 Contact: Subhash Jadavani Description: This entry shows the target power mode of an UFS device for the chosen runtime power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state @@ -849,6 +946,7 @@ Date: February 2018 Contact: Subhash Jadavani Description: This entry shows the target state of an UFS UIC link for the chosen runtime power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl @@ -857,24 +955,28 @@ Contact: Subhash Jadavani Description: This entry could be used to set or show the UFS device system power management level. The current driver implementation supports 6 levels with next target states: - 0 - an UFS device will stay active, an UIC link will - stay active - 1 - an UFS device will stay active, an UIC link will - hibernate - 2 - an UFS device will moved to sleep, an UIC link will - stay active - 3 - an UFS device will moved to sleep, an UIC link will - hibernate - 4 - an UFS device will be powered off, an UIC link will - hibernate - 5 - an UFS device will be powered off, an UIC link will - be powered off + + == ==================================================== + 0 an UFS device will stay active, an UIC link will + stay active + 1 an UFS device will stay active, an UIC link will + hibernate + 2 an UFS device will moved to sleep, an UIC link will + stay active + 3 an UFS device will moved to sleep, an UIC link will + hibernate + 4 an UFS device will be powered off, an UIC link will + hibernate + 5 an UFS device will be powered off, an UIC link will + be powered off + == ==================================================== What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state Date: February 2018 Contact: Subhash Jadavani Description: This entry shows the target power mode of an UFS device for the chosen system power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state @@ -882,18 +984,21 @@ Date: February 2018 Contact: Subhash Jadavani Description: This entry shows the target state of an UFS UIC link for the chosen system power management level. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en Date: June 2020 Contact: Asutosh Das Description: This entry shows if preserve user-space was configured + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units Date: June 2020 Contact: Asutosh Das Description: This entry shows the shared allocated units of WB buffer + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type @@ -901,6 +1006,7 @@ Date: June 2020 Contact: Asutosh Das Description: This entry shows the configured WB type. 0x1 for shared buffer mode. 0x0 for dedicated buffer mode. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj @@ -910,6 +1016,7 @@ Description: This entry shows the total user-space decrease in shared buffer mode. The value of this parameter is 3 for TLC NAND when SLC mode is used as WriteBooster Buffer. 2 for MLC NAND. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units @@ -917,6 +1024,7 @@ Date: June 2020 Contact: Asutosh Das Description: This entry shows the Maximum total WriteBooster Buffer size which is supported by the entire device. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns @@ -924,6 +1032,7 @@ Date: June 2020 Contact: Asutosh Das Description: This entry shows the maximum number of luns that can support WriteBooster. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type @@ -937,46 +1046,59 @@ Description: The supportability of user space reduction mode preserve user space type. 02h: Device can be configured in either user space reduction type or preserve user space type. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type Date: June 2020 Contact: Asutosh Das Description: The supportability of WriteBooster Buffer type. - 00h: LU based WriteBooster Buffer configuration - 01h: Single shared WriteBooster Buffer - configuration - 02h: Supporting both LU based WriteBooster - Buffer and Single shared WriteBooster Buffer - configuration + + === ========================================================== + 00h LU based WriteBooster Buffer configuration + 01h Single shared WriteBooster Buffer configuration + 02h Supporting both LU based WriteBooster. + Buffer and Single shared WriteBooster Buffer configuration + === ========================================================== + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable Date: June 2020 Contact: Asutosh Das Description: This entry shows the status of WriteBooster. - 0: WriteBooster is not enabled. - 1: WriteBooster is enabled + + == ============================ + 0 WriteBooster is not enabled. + 1 WriteBooster is enabled + == ============================ + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en Date: June 2020 Contact: Asutosh Das Description: This entry shows if flush is enabled. - 0: Flush operation is not performed. - 1: Flush operation is performed. + + == ================================= + 0 Flush operation is not performed. + 1 Flush operation is performed. + == ================================= + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8 Date: June 2020 Contact: Asutosh Das Description: Flush WriteBooster Buffer during hibernate state. - 0: Device is not allowed to flush the - WriteBooster Buffer during link hibernate - state. - 1: Device is allowed to flush the - WriteBooster Buffer during link hibernate - state + + == ================================================= + 0 Device is not allowed to flush the + WriteBooster Buffer during link hibernate state. + 1 Device is allowed to flush the + WriteBooster Buffer during link hibernate state. + == ================================================= + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf @@ -984,23 +1106,30 @@ Date: June 2020 Contact: Asutosh Das Description: This entry shows the amount of unused WriteBooster buffer available. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf Date: June 2020 Contact: Asutosh Das Description: This entry shows the amount of unused current buffer. + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status Date: June 2020 Contact: Asutosh Das Description: This entry shows the flush operation status. - 00h: idle - 01h: Flush operation in progress - 02h: Flush operation stopped prematurely. - 03h: Flush operation completed successfully - 04h: Flush operation general failure + + + === ====================================== + 00h idle + 01h Flush operation in progress + 02h Flush operation stopped prematurely. + 03h Flush operation completed successfully + 04h Flush operation general failure + === ====================================== + The file is read only. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est @@ -1008,9 +1137,13 @@ Date: June 2020 Contact: Asutosh Das Description: This entry shows an indication of the WriteBooster Buffer lifetime based on the amount of performed program/erase cycles - 01h: 0% - 10% WriteBooster Buffer life time used + + === ============================================= + 01h 0% - 10% WriteBooster Buffer life time used ... - 0Ah: 90% - 100% WriteBooster Buffer life time used + 0Ah 90% - 100% WriteBooster Buffer life time used + === ============================================= + The file is read only. What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units @@ -1018,4 +1151,5 @@ Date: June 2020 Contact: Asutosh Das Description: This entry shows the configured size of WriteBooster buffer. 0400h corresponds to 4GB. + The file is read only. diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 index d301e7017afe..e92aba4eb594 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 +++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 @@ -5,7 +5,9 @@ Contact: Jan Kandziora Description: When written, this file sets the I2C speed on the connected DS28E17 chip. When read, it reads the current setting from the DS28E17 chip. + Valid values: 100, 400, 900 [kBaud]. + Default 100, can be set by w1_ds28e17.speed= module parameter. Users: w1_ds28e17 driver @@ -17,5 +19,6 @@ Description: When written, this file sets the multiplier used to calculate the busy timeout for I2C operations on the connected DS28E17 chip. When read, returns the current setting. Valid values: 1 to 9. + Default 1, can be set by w1_ds28e17.stretch= module parameter. Users: w1_ds28e17 driver diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index e4afc2538210..b16d30a71709 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -81,11 +81,11 @@ Description: $ cd /sys/firmware/acpi/interrupts $ grep . * error: 0 - ff_gbl_lock: 0 enable - ff_pmtimer: 0 invalid - ff_pwr_btn: 0 enable - ff_rt_clk: 2 disable - ff_slp_btn: 0 invalid + ff_gbl_lock: 0 enable + ff_pmtimer: 0 invalid + ff_pwr_btn: 0 enable + ff_rt_clk: 2 disable + ff_slp_btn: 0 invalid gpe00: 0 invalid gpe01: 0 enable gpe02: 108 enable @@ -118,9 +118,9 @@ Description: gpe1D: 0 invalid gpe1E: 0 invalid gpe1F: 0 invalid - gpe_all: 1192 - sci: 1194 - sci_not: 0 + gpe_all: 1192 + sci: 1194 + sci_not: 0 =========== ================================================== sci The number of times the ACPI SCI diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-esrt b/Documentation/ABI/testing/sysfs-firmware-efi-esrt index 6e431d1a4e79..31b57676d4ad 100644 --- a/Documentation/ABI/testing/sysfs-firmware-efi-esrt +++ b/Documentation/ABI/testing/sysfs-firmware-efi-esrt @@ -35,10 +35,13 @@ What: /sys/firmware/efi/esrt/entries/entry$N/fw_type Date: February 2015 Contact: Peter Jones Description: What kind of firmware entry this is: - 0 - Unknown - 1 - System Firmware - 2 - Device Firmware - 3 - UEFI Driver + + == =============== + 0 Unknown + 1 System Firmware + 2 Device Firmware + 3 UEFI Driver + == =============== What: /sys/firmware/efi/esrt/entries/entry$N/fw_class Date: February 2015 @@ -71,11 +74,14 @@ Date: February 2015 Contact: Peter Jones Description: The result of the last firmware update attempt for the firmware resource entry. - 0 - Success - 1 - Insufficient resources - 2 - Incorrect version - 3 - Invalid format - 4 - Authentication error - 5 - AC power event - 6 - Battery power event + + == ====================== + 0 Success + 1 Insufficient resources + 2 Incorrect version + 3 Invalid format + 4 Authentication error + 5 AC power event + 6 Battery power event + == ====================== diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map index c61b9b348e99..9c4d581be396 100644 --- a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map +++ b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map @@ -14,7 +14,7 @@ Description: Switching efi runtime services to virtual mode requires /sys/firmware/efi/runtime-map/ is the directory the kernel exports that information in. - subdirectories are named with the number of the memory range: + subdirectories are named with the number of the memory range:: /sys/firmware/efi/runtime-map/0 /sys/firmware/efi/runtime-map/1 @@ -24,11 +24,13 @@ Description: Switching efi runtime services to virtual mode requires Each subdirectory contains five files: - attribute : The attributes of the memory range. - num_pages : The size of the memory range in pages. - phys_addr : The physical address of the memory range. - type : The type of the memory range. - virt_addr : The virtual address of the memory range. + ========= ========================================= + attribute The attributes of the memory range. + num_pages The size of the memory range in pages. + phys_addr The physical address of the memory range. + type The type of the memory range. + virt_addr The virtual address of the memory range. + ========= ========================================= Above values are all hexadecimal numbers with the '0x' prefix. Users: Kexec diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg index 011dda4f8e8a..ee0d6dbc810e 100644 --- a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg +++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg @@ -15,7 +15,7 @@ Description: to the fw_cfg device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. - === SysFS fw_cfg Interface === + **SysFS fw_cfg Interface** The fw_cfg sysfs interface described in this document is only intended to display discoverable blobs (i.e., those registered @@ -31,7 +31,7 @@ Description: /sys/firmware/qemu_fw_cfg/rev - --- Discoverable fw_cfg blobs by selector key --- + **Discoverable fw_cfg blobs by selector key** All discoverable blobs listed in the fw_cfg file directory are displayed as entries named after their unique selector key @@ -45,24 +45,26 @@ Description: Each such fw_cfg sysfs entry has the following values exported as attributes: - name : The 56-byte nul-terminated ASCII string used as the + ==== ==================================================== + name The 56-byte nul-terminated ASCII string used as the blob's 'file name' in the fw_cfg directory. - size : The length of the blob, as given in the fw_cfg + size The length of the blob, as given in the fw_cfg directory. - key : The value of the blob's selector key as given in the + key The value of the blob's selector key as given in the fw_cfg directory. This value is the same as used in the parent directory name. - raw : The raw bytes of the blob, obtained by selecting the + raw The raw bytes of the blob, obtained by selecting the entry via the control register, and reading a number of bytes equal to the blob size from the data register. + ==== ==================================================== - --- Listing fw_cfg blobs by file name --- + **Listing fw_cfg blobs by file name** While the fw_cfg device does not impose any specific naming convention on the blobs registered in the file directory, QEMU developers have traditionally used path name semantics - to give each blob a descriptive name. For example: + to give each blob a descriptive name. For example:: "bootorder" "genroms/kvmvapic.bin" @@ -81,7 +83,7 @@ Description: of directories matching the path name components of fw_cfg blob names, ending in symlinks to the by_key entry for each "basename", as illustrated below (assume current directory is - /sys/firmware): + /sys/firmware):: qemu_fw_cfg/by_name/bootorder -> ../by_key/38 qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35 diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi index 4be7d44aeacf..5210e0f06ddb 100644 --- a/Documentation/ABI/testing/sysfs-firmware-sfi +++ b/Documentation/ABI/testing/sysfs-firmware-sfi @@ -9,7 +9,7 @@ Description: http://simplefirmware.org/documentation While the tables are used by the kernel, user-space - can observe them this way: + can observe them this way:: - # cd /sys/firmware/sfi/tables - # cat $TABLENAME > $TABLENAME.bin + # cd /sys/firmware/sfi/tables + # cat $TABLENAME > $TABLENAME.bin diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv index 4573fd4b7876..66800baab096 100644 --- a/Documentation/ABI/testing/sysfs-firmware-sgi_uv +++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv @@ -5,7 +5,7 @@ Description: The /sys/firmware/sgi_uv directory contains information about the SGI UV platform. - Under that directory are a number of files: + Under that directory are a number of files:: partition_id coherence_id @@ -14,7 +14,7 @@ Description: SGI UV systems can be partitioned into multiple physical machines, which each partition running a unique copy of the operating system. Each partition will have a unique - partition id. To display the partition id, use the command: + partition id. To display the partition id, use the command:: cat /sys/firmware/sgi_uv/partition_id @@ -22,6 +22,6 @@ Description: A partitioned SGI UV system can have one or more coherence domain. The coherence id indicates which coherence domain this partition is in. To display the coherence id, use the - command: + command:: cat /sys/firmware/sgi_uv/coherence_id diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 834d0becae6d..67b3ed8e8c2f 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -20,10 +20,13 @@ What: /sys/fs/f2fs//gc_idle Date: July 2013 Contact: "Namjae Jeon" Description: Controls the victim selection policy for garbage collection. - Setting gc_idle = 0(default) will disable this option. Setting - gc_idle = 1 will select the Cost Benefit approach & setting - gc_idle = 2 will select the greedy approach & setting - gc_idle = 3 will select the age-threshold based approach. + Setting gc_idle = 0(default) will disable this option. Setting: + + =========== =============================================== + gc_idle = 1 will select the Cost Benefit approach & setting + gc_idle = 2 will select the greedy approach & setting + gc_idle = 3 will select the age-threshold based approach. + =========== =============================================== What: /sys/fs/f2fs//reclaim_segments Date: October 2013 @@ -46,10 +49,17 @@ Date: November 2013 Contact: "Jaegeuk Kim" Description: Controls the in-place-update policy. updates in f2fs. User can set: - 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, - 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, - 0x10: F2FS_IPU_FSYNC, 0x20: F2FS_IPU_ASYNC, - 0x40: F2FS_IPU_NOCACHE. + + ==== ================= + 0x01 F2FS_IPU_FORCE + 0x02 F2FS_IPU_SSR + 0x04 F2FS_IPU_UTIL + 0x08 F2FS_IPU_SSR_UTIL + 0x10 F2FS_IPU_FSYNC + 0x20 F2FS_IPU_ASYNC, + 0x40 F2FS_IPU_NOCACHE + ==== ================= + Refer segment.h for details. What: /sys/fs/f2fs//min_ipu_util @@ -332,18 +342,28 @@ Date: April 2020 Contact: "Jaegeuk Kim" Description: Give a way to attach REQ_META|FUA to data writes given temperature-based bits. Now the bits indicate: - * REQ_META | REQ_FUA | - * 5 | 4 | 3 | 2 | 1 | 0 | - * Cold | Warm | Hot | Cold | Warm | Hot | + + +-------------------+-------------------+ + | REQ_META | REQ_FUA | + +------+------+-----+------+------+-----+ + | 5 | 4 | 3 | 2 | 1 | 0 | + +------+------+-----+------+------+-----+ + | Cold | Warm | Hot | Cold | Warm | Hot | + +------+------+-----+------+------+-----+ What: /sys/fs/f2fs//node_io_flag Date: June 2020 Contact: "Jaegeuk Kim" Description: Give a way to attach REQ_META|FUA to node writes given temperature-based bits. Now the bits indicate: - * REQ_META | REQ_FUA | - * 5 | 4 | 3 | 2 | 1 | 0 | - * Cold | Warm | Hot | Cold | Warm | Hot | + + +-------------------+-------------------+ + | REQ_META | REQ_FUA | + +------+------+-----+------+------+-----+ + | 5 | 4 | 3 | 2 | 1 | 0 | + +------+------+-----+------+------+-----+ + | Cold | Warm | Hot | Cold | Warm | Hot | + +------+------+-----+------+------+-----+ What: /sys/fs/f2fs//iostat_period_ms Date: April 2020 diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/Documentation/ABI/testing/sysfs-kernel-mm-ksm index dfc13244cda3..1c9bed5595f5 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-ksm +++ b/Documentation/ABI/testing/sysfs-kernel-mm-ksm @@ -34,8 +34,9 @@ Description: Kernel Samepage Merging daemon sysfs interface in a tree. run: write 0 to disable ksm, read 0 while ksm is disabled. - write 1 to run ksm, read 1 while ksm is running. - write 2 to disable ksm and unmerge all its pages. + + - write 1 to run ksm, read 1 while ksm is running. + - write 2 to disable ksm and unmerge all its pages. sleep_millisecs: how many milliseconds ksm should sleep between scans. diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab index ed35833ad7f0..c9f12baf8baa 100644 --- a/Documentation/ABI/testing/sysfs-kernel-slab +++ b/Documentation/ABI/testing/sysfs-kernel-slab @@ -346,6 +346,7 @@ Description: number of objects per slab. If a slab cannot be allocated because of fragmentation, SLUB will retry with the minimum order possible depending on its characteristics. + When debug_guardpage_minorder=N (N > 0) parameter is specified (see Documentation/admin-guide/kernel-parameters.rst), the minimum possible order is used and this sysfs entry can not be used to change @@ -361,6 +362,7 @@ Description: new slab has not been possible at the cache's order and instead fallen back to its minimum possible order. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. What: /sys/kernel/slab/cache/partial @@ -410,6 +412,7 @@ Description: slab from a remote node as opposed to allocating a new slab on the local node. This reduces the amount of wasted memory over the entire system but can be expensive. + Available when CONFIG_NUMA is enabled. What: /sys/kernel/slab/cache/sanity_checks diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module index 0aac02e7fb0e..353c0db5bc1f 100644 --- a/Documentation/ABI/testing/sysfs-module +++ b/Documentation/ABI/testing/sysfs-module @@ -17,14 +17,15 @@ KernelVersion: 3.1 Contact: Kirill Smelkov Description: Maximum time allowed for periodic transfers per microframe (μs) - [ USB 2.0 sets maximum allowed time for periodic transfers per + Note: + USB 2.0 sets maximum allowed time for periodic transfers per microframe to be 80%, that is 100 microseconds out of 125 microseconds (full microframe). However there are cases, when 80% max isochronous bandwidth is too limiting. For example two video streams could require 110 microseconds of isochronous bandwidth per microframe to work - together. ] + together. Through this setting it is possible to raise the limit so that the host controller would allow allocating more than 100 @@ -45,8 +46,10 @@ Date: Jan 2012 KernelVersion:»·3.3 Contact: Kay Sievers Description: Module taint flags: - P - proprietary module - O - out-of-tree module - F - force-loaded module - C - staging driver module - E - unsigned module + == ===================== + P proprietary module + O out-of-tree module + F force-loaded module + C staging driver module + E unsigned module + == ===================== diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop index 9b917c7453de..82bcfe9df66e 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-laptop +++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop @@ -34,9 +34,12 @@ Description: this file. To disable a trigger, write its name preceded by '-' instead. - For example, to enable the keyboard as trigger run: + For example, to enable the keyboard as trigger run:: + echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers - To disable it: + + To disable it:: + echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers Note that not all the available triggers can be configured. @@ -57,7 +60,8 @@ Description: with any the above units. If no unit is specified, the value is assumed to be expressed in seconds. - For example, to set the timeout to 10 minutes run: + For example, to set the timeout to 10 minutes run:: + echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout Note that when this file is read, the returned value might be diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios index 205d3b6361e0..e6e0f7f834a7 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-smbios +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios @@ -13,8 +13,8 @@ Description: For example the token ID "5" would be available as the following attributes: - 0005_location - 0005_value + - 0005_location + - 0005_value Tokens will vary from machine to machine, and only tokens available on that machine will be diff --git a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl index c394b808be19..b6a138b50d99 100644 --- a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl +++ b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl @@ -5,9 +5,9 @@ Contact: Wolfram Sang Description: Reading the file will give you a list of masters which can be selected for a demultiplexed bus. The format is - ":". Example from a Renesas Lager board: + ":". Example from a Renesas Lager board:: - 0:/i2c@e6500000 1:/i2c@e6508000 + 0:/i2c@e6500000 1:/i2c@e6508000 What: /sys/devices/platform//current_master Date: January 2016 diff --git a/Documentation/ABI/testing/sysfs-platform-kim b/Documentation/ABI/testing/sysfs-platform-kim index c1653271872a..a7f81de68046 100644 --- a/Documentation/ABI/testing/sysfs-platform-kim +++ b/Documentation/ABI/testing/sysfs-platform-kim @@ -5,6 +5,7 @@ Contact: "Pavan Savoy" Description: Name of the UART device at which the WL128x chip is connected. example: "/dev/ttyS0". + The device name flows down to architecture specific board initialization file from the SFI/ATAGS bootloader firmware. The name exposed is read from the user-space diff --git a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 index 6212697bbf6f..bc510ccc37a7 100644 --- a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 +++ b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 @@ -7,9 +7,11 @@ Description: The file can show/change the phy mode for role swap of usb. Write the following strings to change the mode: - "host" - switching mode from peripheral to host. - "peripheral" - switching mode from host to peripheral. + + - "host" - switching mode from peripheral to host. + - "peripheral" - switching mode from host to peripheral. Read the file, then it shows the following strings: - "host" - The mode is host now. - "peripheral" - The mode is peripheral now. + + - "host" - The mode is host now. + - "peripheral" - The mode is peripheral now. diff --git a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 index 5621c15d5dc0..8af5b9c3fabb 100644 --- a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 +++ b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 @@ -7,9 +7,11 @@ Description: The file can show/change the drd mode of usb. Write the following string to change the mode: - "host" - switching mode from peripheral to host. - "peripheral" - switching mode from host to peripheral. + + - "host" - switching mode from peripheral to host. + - "peripheral" - switching mode from host to peripheral. Read the file, then it shows the following strings: - "host" - The mode is host now. - "peripheral" - The mode is peripheral now. + + - "host" - The mode is host now. + - "peripheral" - The mode is peripheral now. diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 5e6ead29124c..51c0f578bfce 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -47,14 +47,18 @@ Description: suspend-to-disk mechanism. Reading from this file returns the name of the method by which the system will be put to sleep on the next suspend. There are four methods supported: + 'firmware' - means that the memory image will be saved to disk by some firmware, in which case we also assume that the firmware will handle the system suspend. + 'platform' - the memory image will be saved by the kernel and the system will be put to sleep by the platform driver (e.g. ACPI or other PM registers). + 'shutdown' - the memory image will be saved by the kernel and the system will be powered off. + 'reboot' - the memory image will be saved by the kernel and the system will be rebooted. @@ -74,12 +78,12 @@ Description: The suspend-to-disk method may be chosen by writing to this file one of the accepted strings: - 'firmware' - 'platform' - 'shutdown' - 'reboot' - 'testproc' - 'test' + - 'firmware' + - 'platform' + - 'shutdown' + - 'reboot' + - 'testproc' + - 'test' It will only change to 'firmware' or 'platform' if the system supports that. @@ -114,9 +118,9 @@ Description: string representing a nonzero integer into it. To use this debugging feature you should attempt to suspend - the machine, then reboot it and run + the machine, then reboot it and run:: - dmesg -s 1000000 | grep 'hash matches' + dmesg -s 1000000 | grep 'hash matches' If you do not get any matches (or they appear to be false positives), it is possible that the last PM event point @@ -244,6 +248,7 @@ Description: wakeup sources created with the help of /sys/power/wake_lock. When a string is written to /sys/power/wake_unlock, it will be assumed to represent the name of a wakeup source to deactivate. + If a wakeup source object of that name exists and is active at the moment, it will be deactivated. diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling index 8a8e466eb2c0..e39dd3a0ceef 100644 --- a/Documentation/ABI/testing/sysfs-profiling +++ b/Documentation/ABI/testing/sysfs-profiling @@ -5,7 +5,7 @@ Description: /sys/kernel/profiling is the runtime equivalent of the boot-time profile= option. - You can get the same effect running: + You can get the same effect running:: echo 2 > /sys/kernel/profiling diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf index a99c5f86a37a..2969d3694ec0 100644 --- a/Documentation/ABI/testing/sysfs-wusb_cbaf +++ b/Documentation/ABI/testing/sysfs-wusb_cbaf @@ -45,7 +45,8 @@ Description: 7. Device is unplugged. References: - [WUSB-AM] Association Models Supplement to the + [WUSB-AM] + Association Models Supplement to the Certified Wireless Universal Serial Bus Specification, version 1.0. diff --git a/Documentation/ABI/testing/usb-charger-uevent b/Documentation/ABI/testing/usb-charger-uevent index 419a92dd0d86..1db89b0cf80f 100644 --- a/Documentation/ABI/testing/usb-charger-uevent +++ b/Documentation/ABI/testing/usb-charger-uevent @@ -3,44 +3,52 @@ Date: 2020-01-14 KernelVersion: 5.6 Contact: linux-usb@vger.kernel.org Description: There are two USB charger states: - USB_CHARGER_ABSENT - USB_CHARGER_PRESENT + + - USB_CHARGER_ABSENT + - USB_CHARGER_PRESENT + There are five USB charger types: - USB_CHARGER_UNKNOWN_TYPE: Charger type is unknown - USB_CHARGER_SDP_TYPE: Standard Downstream Port - USB_CHARGER_CDP_TYPE: Charging Downstream Port - USB_CHARGER_DCP_TYPE: Dedicated Charging Port - USB_CHARGER_ACA_TYPE: Accessory Charging Adapter + + ======================== ========================== + USB_CHARGER_UNKNOWN_TYPE Charger type is unknown + USB_CHARGER_SDP_TYPE Standard Downstream Port + USB_CHARGER_CDP_TYPE Charging Downstream Port + USB_CHARGER_DCP_TYPE Dedicated Charging Port + USB_CHARGER_ACA_TYPE Accessory Charging Adapter + ======================== ========================== + https://www.usb.org/document-library/battery-charging-v12-spec-and-adopters-agreement - Here are two examples taken using udevadm monitor -p when - USB charger is online: - UDEV change /devices/soc0/usbphynop1 (platform) - ACTION=change - DEVPATH=/devices/soc0/usbphynop1 - DRIVER=usb_phy_generic - MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv - OF_COMPATIBLE_0=usb-nop-xceiv - OF_COMPATIBLE_N=1 - OF_FULLNAME=/usbphynop1 - OF_NAME=usbphynop1 - SEQNUM=2493 - SUBSYSTEM=platform - USB_CHARGER_STATE=USB_CHARGER_PRESENT - USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE - USEC_INITIALIZED=227422826 + Here are two examples taken using ``udevadm monitor -p`` when + USB charger is online:: - USB charger is offline: - KERNEL change /devices/soc0/usbphynop1 (platform) - ACTION=change - DEVPATH=/devices/soc0/usbphynop1 - DRIVER=usb_phy_generic - MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv - OF_COMPATIBLE_0=usb-nop-xceiv - OF_COMPATIBLE_N=1 - OF_FULLNAME=/usbphynop1 - OF_NAME=usbphynop1 - SEQNUM=2494 - SUBSYSTEM=platform - USB_CHARGER_STATE=USB_CHARGER_ABSENT - USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE + UDEV change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2493 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_PRESENT + USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE + USEC_INITIALIZED=227422826 + + USB charger is offline:: + + KERNEL change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2494 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_ABSENT + USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE diff --git a/Documentation/ABI/testing/usb-uevent b/Documentation/ABI/testing/usb-uevent index d35c3cad892c..2b8eca4bf2b1 100644 --- a/Documentation/ABI/testing/usb-uevent +++ b/Documentation/ABI/testing/usb-uevent @@ -6,22 +6,22 @@ Description: When the USB Host Controller has entered a state where it is no longer functional a uevent will be raised. The uevent will contain ACTION=offline and ERROR=DEAD. - Here is an example taken using udevadm monitor -p: + Here is an example taken using udevadm monitor -p:: - KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb) - ACTION=offline - BUSNUM=002 - DEVNAME=/dev/bus/usb/002/001 - DEVNUM=001 - DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2 - DEVTYPE=usb_device - DRIVER=usb - ERROR=DEAD - MAJOR=189 - MINOR=128 - PRODUCT=1d6b/2/414 - SEQNUM=2168 - SUBSYSTEM=usb - TYPE=9/0/1 + KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb) + ACTION=offline + BUSNUM=002 + DEVNAME=/dev/bus/usb/002/001 + DEVNUM=001 + DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2 + DEVTYPE=usb_device + DRIVER=usb + ERROR=DEAD + MAJOR=189 + MINOR=128 + PRODUCT=1d6b/2/414 + SEQNUM=2168 + SUBSYSTEM=usb + TYPE=9/0/1 Users: chromium-os-dev@chromium.org diff --git a/scripts/get_abi.pl b/scripts/get_abi.pl index f6adf4b38a2b..d09bb37dd236 100755 --- a/scripts/get_abi.pl +++ b/scripts/get_abi.pl @@ -316,8 +316,6 @@ sub output_rest { $len = length($name) if (length($name) > $len); } - print "What:\n\n"; - print "+-" . "-" x $len . "-+\n"; foreach my $name (@names) { printf "| %s", $name . " " x ($len - length($name)) . " |\n"; -- 2.26.2