Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ioana Ciornei <ciorneiioana@gmail.com>
To:     shawnguo@kernel.org
Cc:     robh+dt@kernel.org, leoyang.li@nxp.com, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH v5 04/11] arm64: dts: ls1088ardb: add QSGMII PHY nodes
Date:   Fri, 30 Oct 2020 13:35:48 +0200
Message-Id: <20201030113555.726487-5-ciorneiioana@gmail.com>
In-Reply-To: <20201030113555.726487-1-ciorneiioana@gmail.com>
References: <20201030113555.726487-1-ciorneiioana@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ioana Ciornei <ioana.ciornei@nxp.com>

Annotate the external MDIO1 node and describe the 8 QSGMII PHYs found on
the LS1088ARDB board and add phy-handles for DPMACs 3-10 to its
associated PHY.  Also, add the internal PCS MDIO nodes for the internal
MDIO buses found on the LS1088A SoC along with their internal PCS PHY
and link the corresponding DPMAC to the PCS through the pcs-handle.
Also, rename the dpmac@x nodes to ethernet@x in order to be compliant
with the naming convention used by ethernet controllers.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none
Changes in v3:
 - renamed dpmac@x into ethernet@x
Changes in v4:
 - none
Changes in v5:
 - renamed all PHY nodes to ethernet-phy@X where the unit address is the
   reg value

 .../boot/dts/freescale/fsl-ls1088a-rdb.dts    | 100 ++++++++++++++++++
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  70 ++++++++++--
 2 files changed, 160 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 5633e59febc3..e28443ba2633 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -17,6 +17,98 @@ / {
 	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
 };
 
+&dpmac3 {
+	phy-handle = <&mdio1_phy5>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy6>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	phy-handle = <&mdio1_phy7>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	phy-handle = <&mdio1_phy8>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy5: ethernet-phy@c {
+		reg = <0xc>;
+	};
+
+	mdio1_phy6: ethernet-phy@d {
+		reg = <0xd>;
+	};
+
+	mdio1_phy7: ethernet-phy@e {
+		reg = <0xe>;
+	};
+
+	mdio1_phy8: ethernet-phy@f {
+		reg = <0xf>;
+	};
+
+	mdio1_phy1: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	mdio1_phy2: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	mdio1_phy3: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	mdio1_phy4: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -87,6 +179,14 @@ &esdhc {
 	status = "okay";
 };
 
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
 &qspi {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 58b6a5aa8df2..4bcd4772164d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -690,6 +690,56 @@ emdio2: mdio@8b97000 {
 			status = "disabled";
 		};
 
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3_0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			pcs3_1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			pcs3_2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			pcs3_3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7_0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			pcs7_1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			pcs7_2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			pcs7_3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
 		cluster1_core0_watchdog: wdt@c000000 {
 			compatible = "arm,sp805-wdt", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
@@ -767,52 +817,52 @@ dpmacs {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				dpmac1: dpmac@1 {
+				dpmac1: ethernet@1 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <1>;
 				};
 
-				dpmac2: dpmac@2 {
+				dpmac2: ethernet@2 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <2>;
 				};
 
-				dpmac3: dpmac@3 {
+				dpmac3: ethernet@3 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <3>;
 				};
 
-				dpmac4: dpmac@4 {
+				dpmac4: ethernet@4 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <4>;
 				};
 
-				dpmac5: dpmac@5 {
+				dpmac5: ethernet@5 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <5>;
 				};
 
-				dpmac6: dpmac@6 {
+				dpmac6: ethernet@6 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <6>;
 				};
 
-				dpmac7: dpmac@7 {
+				dpmac7: ethernet@7 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <7>;
 				};
 
-				dpmac8: dpmac@8 {
+				dpmac8: ethernet@8 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <8>;
 				};
 
-				dpmac9: dpmac@9 {
+				dpmac9: ethernet@9 {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <9>;
 				};
 
-				dpmac10: dpmac@a {
+				dpmac10: ethernet@a {
 					compatible = "fsl,qoriq-mc-dpmac";
 					reg = <0xa>;
 				};
-- 
2.28.0