Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ioana Ciornei <ciorneiioana@gmail.com>
To:     shawnguo@kernel.org
Cc:     robh+dt@kernel.org, leoyang.li@nxp.com, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH v5 07/11] arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs
Date:   Fri, 30 Oct 2020 13:35:51 +0200
Message-Id: <20201030113555.726487-8-ciorneiioana@gmail.com>
In-Reply-To: <20201030113555.726487-1-ciorneiioana@gmail.com>
References: <20201030113555.726487-1-ciorneiioana@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ioana Ciornei <ioana.ciornei@nxp.com>

Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the
LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their
associated PHY.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none
Changes in v3:
 - none
Changes in v4:
 - move the phy-connection-type attribute to the ethernet node
Changes in v5:
 - renamed all PHY nodes to ethernet-phy@X and their unit address to be
   the reg value


 .../boot/dts/freescale/fsl-ls2088a-rdb.dts    | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index f6b4d75a258b..a4b0dcab6e8e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -22,3 +22,47 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&dpmac1 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac2 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac3 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy1: ethernet-phy@10 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: ethernet-phy@11 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: ethernet-phy@12 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: ethernet-phy@13 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x13>;
+	};
+};
-- 
2.28.0