Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ioana Ciornei <ciorneiioana@gmail.com>
To:     shawnguo@kernel.org
Cc:     robh+dt@kernel.org, leoyang.li@nxp.com, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH v5 08/11] arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs
Date:   Fri, 30 Oct 2020 13:35:52 +0200
Message-Id: <20201030113555.726487-9-ciorneiioana@gmail.com>
In-Reply-To: <20201030113555.726487-1-ciorneiioana@gmail.com>
References: <20201030113555.726487-1-ciorneiioana@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ioana Ciornei <ioana.ciornei@nxp.com>

Annotate the EMDIO2 node and describe the other 4 10GBASER PHYs found on
the LS2088ARDB board. Also, add phy-handles for DPMACs 5-8 to their
associated PHY.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none
Changes in v3:
 - none
Changes in v4:
 - move the phy-connection-type attribute to the ethernet node
 - remove the interrupt description
Changes in v5:
 - renamed all PHY nodes to ethernet-phy

 .../boot/dts/freescale/fsl-ls2088a-rdb.dts    | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index a4b0dcab6e8e..854f604049ca 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -43,6 +43,26 @@ &dpmac4 {
 	phy-connection-type = "10gbase-r";
 };
 
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
 &emdio1 {
 	status = "okay";
 
@@ -66,3 +86,27 @@ mdio1_phy4: ethernet-phy@13 {
 		reg = <0x13>;
 	};
 };
+
+&emdio2 {
+	status = "okay";
+
+	mdio2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		reg = <0x3>;
+	};
+};
-- 
2.28.0