Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932232AbWHPVKk (ORCPT ); Wed, 16 Aug 2006 17:10:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932231AbWHPVKk (ORCPT ); Wed, 16 Aug 2006 17:10:40 -0400 Received: from outgoing3.smtp.agnat.pl ([193.239.44.85]:54740 "EHLO outgoing3.smtp.agnat.pl") by vger.kernel.org with ESMTP id S932228AbWHPVKi convert rfc822-to-8bit (ORCPT ); Wed, 16 Aug 2006 17:10:38 -0400 From: Arkadiusz Miskiewicz Organization: SelfOrganizing To: Andrew Vasquez Subject: Re: qlogic 2312 problems on 2.6.16.22, 2.6.18rc4 Date: Wed, 16 Aug 2006 23:10:26 +0200 User-Agent: KMail/1.9.4 Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org References: <200608140946.50411.arekm@pld-linux.org> <200608151429.09082.arekm@pld-linux.org> <20060816181445.GU3674@andrew-vasquezs-computer.local> In-Reply-To: <20060816181445.GU3674@andrew-vasquezs-computer.local> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200608162310.26541.arekm@pld-linux.org> X-Authenticated-Id: arekm Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38651 Lines: 739 On Wednesday 16 August 2006 20:14, Andrew Vasquez wrote: > > Everything works fine on 32-bit dual xeon machine with card inserted into > > PCI slot. Here in new dual core opteron machine the card sits in PCI-X > > slot. It's Thunder K8SRE S2891 mainboard, Transport GT24 B2891 1U > > barebone, Tyan M2075 riser card, 2 x Opteron 270, 6GB ram. > > Have you ruled out motherboard/memory issues? We've run 23xx and 24xx > boards on a variety of AMD64 motherboards with more than 4GB of > memory. Not exactly. I have three such servers (the same board, cpu, ram). One of these has PCI-E scsi raid controller and works without any problem. Second one (which I'm using for testing) has Adaptec SCSI controller in Tyan specific TARRO slot (which afaik sits on the same PCI-X bus as PCI-X slot). I had an array on that adaptec for some time and there were no problems. The second one also got own qlogic 2312 card. Third machine has other qlogic 2312 card and I tried it two times, too - the same issues observed. So mainboards and memory should be fine but I guess there is possibility that PCI-X slot is somehow broken there. I'll test that in several weeks (unfortunately I have no physical access to these now) by putting some typical scsi controller into that pci-x slot. > > Note that booting with 32-bit kernel (which works fine on Xeon system) > > doesn't cure the problem on Opteron system. Booting 64bit 2.6.18rc4 > > kernel with mem=3G also doesn't fix anything. > > Hmm... Can you send your dmesg output post boot and driver load? dmesg and lspci -vvv attached. There is one thing that worries me: QLogic QLA2340 - ISP2312: PCI-X (133 MHz) @ 0000:09:08.0 hdma+, host#=0, fw=3.03.20 IPX Why it's showing 133MHz here? Tyan manual ftp://ftp.tyan.com/manuals/m_s2891_100.pdf says on page 4 ,,One PCI-X 100MHz slot (PCI-X B)''. Hm, while looking at that manual I see that on page 13 it says ,,one pci-x 100MHz device''. Maybe that's the problem since I didn't remove Adaptec TARO controller. I should be able to get this tested again without adaptec sooner than several weeks. Maybe I misunderstand what documentation says here. Anyway still don't know why driver displays 133Mhz while manual says about 100MHz one pci-x slot. > > /t is on tmpfs, /dev/sda2 in on FC array. Reading the same data several > > times and I get different md5sum results each time, see below. > > > > How I can track where corruption occurs? I started dd'ing text file onto /dev/sda2, then back to tmpfs and diffing these. Corruption is one byte, several not corrupted bytes and again one corrupted byte. Some regular pattern. > > Regards, > Andrew Vasquez Bootdata ok (command line is initrd=/initrd-test.gz init=/linuxrc root=/dev/ram0 ramdisk_size=54000 console=tty0 console=ttyS0,115200n81 panic=60 BOOT_IMAGE=vmlinuz-test ip=192.168.0.127:192.168.0.1:192.168.0.1:255.255.255.0 ) Linux version 2.6.18-rc4-dirty (root@db01new) (gcc version 3.3.6 (PLD Linux)) #7 Wed Aug 16 22:43:23 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) BIOS-e820: 000000007ff90000 - 000000007ff99000 (ACPI data) BIOS-e820: 000000007ff99000 - 0000000080000000 (ACPI NVS) BIOS-e820: 0000000080000000 - 00000000bff80000 (usable) BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7040 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000007ff95407 ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x000000007ff98d72 ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x000000007ff98de6 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000007ff98ef6 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000007ff98f46 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000007ff98fd8 ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 1545657 DMA zone: 2161 pages, LIFO batch:0 DMA32 zone: 767816 pages, LIFO batch:31 Normal zone: 775680 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xdf200000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 17, address 0xdf200000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xdf201000] gsi_base[28]) IOAPIC[2]: apic_id 6, version 17, address 0xdf201000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) Built 1 zonelists. Total pages: 1545657 Kernel command line: initrd=/initrd-test.gz init=/linuxrc root=/dev/ram0 ramdisk_size=54000 console=tty0 console=ttyS0,115200n81 panic=60 BOOT_IMAGE=vmlinuz-test ip=192.168.0.127:192.168.0.1:192.168.0.1:255.255.255.0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2009.273 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096 memory used by lock dependency info: 1120 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... CPU 0: aperture @ c0000000 size 256 MB CPU 1: aperture @ c0000000 size 256 MB Memory: 6168496k/7340032k available (2114k kernel code, 121284k reserved, 1130k data, 192k init) Calibrating delay using timer specific routine.. 4021.70 BogoMIPS (lpj=8043410) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Dual Core AMD Opteron(tm) Processor 270 stepping 02 ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12557973 Detected 12.557 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 780k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:07.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Root Bridge [PCI2] (0000:08) PCI: Probing PCI hardware (bus 08) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ c0000000 size 262144 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 256MB of IOMMU area in the AGP aperture pnp: 00:08: ioport range 0x8000-0x807f could not be reserved pnp: 00:08: ioport range 0x8080-0x80ff has been reserved pnp: 00:08: ioport range 0x8400-0x847f has been reserved pnp: 00:08: ioport range 0x8480-0x84ff has been reserved pnp: 00:08: ioport range 0x8800-0x887f has been reserved pnp: 00:08: ioport range 0x8880-0x88ff has been reserved pnp: 00:08: ioport range 0x5000-0x503f has been reserved pnp: 00:08: ioport range 0x5040-0x507f has been reserved PCI: Bridge: 0000:00:09.0 IO window: 2000-2fff MEM window: dd100000-deffffff PREFETCH window: c2000000-c20fffff PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:08:0a.0 IO window: 3000-3fff MEM window: df300000-df3fffff PREFETCH window: c2100000-c21fffff PCI: Bridge: 0000:08:0b.0 IO window: disabled. MEM window: df400000-df4fffff PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 32768 (order: 9, 2359296 bytes) TCP bind hash table entries: 16384 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 32768 bind 16384) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1155768349.728:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:02: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 54000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) IP-Config: No network devices available. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. Freeing unused kernel memory: 192k freed tg3.c:v3.64 (July 31, 2006) GSI 16 sharing vector 0xC1 and IRQ 16 ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 193 eth0: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:33:5e:ae eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 17 sharing vector 0xC9 and IRQ 17 ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 201 eth1: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:33:5e:af eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] PM: Writing back config space on device 0000:0a:09.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:0a:09.0 at offset 2 (was 2000000, writing 2000003) PM: Writing back config space on device 0000:0a:09.0 at offset 1 (was 2b00000, writing 2b00106) tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present SCSI subsystem initialized QLogic Fibre Channel HBA Driver GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:09:08.0[A] -> GSI 24 (level, low) -> IRQ 209 qla2xxx 0000:09:08.0: Found an ISP2312, irq 209, iobase 0xffffc20000004000 qla2xxx 0000:09:08.0: Configuring PCI space... qla2xxx 0000:09:08.0: Configure NVRAM parameters... qla2xxx 0000:09:08.0: Verifying loaded RISC code... scsi(0): **** Load RISC code **** scsi(0): Verifying Checksum of loaded RISC code. scsi(0): Checksum OK, start firmware. qla2xxx 0000:09:08.0: Allocated (412 KB) for firmware dump... scsi(0): Issue init firmware. scsi(0): Asynchronous LIP RESET (f7f7). qla2xxx 0000:09:08.0: LIP reset occured (f7f7). qla2xxx 0000:09:08.0: Waiting for LIP to complete... scsi(0): Asynchronous P2P MODE received. scsi(0): Asynchronous LOOP UP (2 Gbps). qla2xxx 0000:09:08.0: LOOP UP detected (2 Gbps). scsi(0): Asynchronous PORT UPDATE. scsi(0): Port database changed ffff 0006 0000. scsi(0): F/W Ready - OK scsi(0): fw_state=3 curr time=ffff0467. qla2xxx 0000:09:08.0: Topology - (F_Port), Host Loop address 0xffff scsi(0): Configure loop -- dpc flags =0x4080040 scsi(0): RSCN queue entry[0] = [00/000000]. scsi(0): device_resync: rscn overflow. scsi(0): RFT_ID exiting normally. scsi(0): RFF_ID exiting normally. scsi(0): RNN_ID exiting normally. scsi(0): RSNN_NN exiting normally. scsi(0): Asynchronous PORT UPDATE ignored 0000/0006/bd92. scsi(0): GID_PT entry - nn 500508b300917e50 pn 500508b300917e51 portid=010000. scsi(0): GID_PT entry - nn 200000e08b8051d6 pn 210000e08b8051d6 portid=010100. scsi(0): GID_PT entry - nn 200000e08b950428 pn 210000e08b950428 portid=010200. scsi(0): device wrap (010200) scsi(0): Trying Fabric Login w/loop id 0x0081 for port 010000. scsi(0): Trying Fabric Login w/loop id 0x0082 for port 010100. qla2x00_mailbox_command(0): **** FAILED. mbx0=4007, mbx1=0, mbx2=100, cmd=6f **** qla2x00_login_fabric(0): failed=102 mb[0]=4007 mb[1]=0 mb[2]=100. Fabric Login: port in use - next loop id=0x0000, port Id=010100. scsi(0): Trying Fabric Login w/loop id 0x0000 for port 010100. scsi(0): LOOP READY DEBUG: detect hba 0 at address = ffff8101bd9807e0 scsi0 : qla2xxx qla2xxx 0000:09:08.0: QLogic Fibre Channel HBA Driver: 8.01.05-k3 QLogic QLA2340 - ISP2312: PCI-X (133 MHz) @ 0000:09:08.0 hdma+, host#=0, fw=3.03.20 IPX Vendor: COMPAQ Model: MSA1000 Rev: 4.96 Type: RAID ANSI SCSI revision: 04 Vendor: COMPAQ Model: MSA1000 VOLUME Rev: 4.96 Type: Direct-Access ANSI SCSI revision: 04 Vendor: COMPAQ Model: MSA1000 VOLUME Rev: 4.96 Type: Direct-Access ANSI SCSI revision: 04 scsi(0): Asynchronous PORT UPDATE ignored 0001/0006/bd92. scsi(0): Asynchronous PORT UPDATE ignored 0001/0007/bd92. scsi(0): Asynchronous PORT UPDATE ignored 0001/0004/bd92. SCSI device sda: 513790830 512-byte hdwr sectors (263061 MB) sda: Write Protect is off sda: Mode Sense: 83 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 513790830 512-byte hdwr sectors (263061 MB) sda: Write Protect is off sda: Mode Sense: 83 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:2: Attached scsi disk sda SCSI device sdb: 1381590 512-byte hdwr sectors (707 MB) sdb: Write Protect is off sdb: Mode Sense: 83 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 1381590 512-byte hdwr sectors (707 MB) sdb: Write Protect is off sdb: Mode Sense: 83 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb: p2 exceeds device capacity sd 0:0:0:4: Attached scsi disk sdb 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) Subsystem: Tyan Computer Unknown device 2891 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: Tyan Computer Unknown device 2891 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee00000 Data: 40b9 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=08:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=14 CommitmentLimit=65535 Downstream: Capacity=2 CommitmentLimit=65535 Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration Capabilities: [c0] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=08:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=14 CommitmentLimit=65535 Downstream: Capacity=2 CommitmentLimit=65535 Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Tyan Computer Unknown device 2891 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-