Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ioana Ciornei <ciorneiioana@gmail.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Jakub Kicinski <kuba@kernel.org>, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Ioana Ciornei <ioana.ciornei@nxp.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        Willy Liu <willy.liu@realtek.com>
Subject: [PATCH net-next v2 18/19] net: phy: realtek: implement generic .handle_interrupt() callback
Date:   Sun,  1 Nov 2020 14:51:13 +0200
Message-Id: <20201101125114.1316879-19-ciorneiioana@gmail.com>
In-Reply-To: <20201101125114.1316879-1-ciorneiioana@gmail.com>
References: <20201101125114.1316879-1-ciorneiioana@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ioana Ciornei <ioana.ciornei@nxp.com>

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Willy Liu <willy.liu@realtek.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - Adjust .handle_interrupt() so that we only take into account the
   enabled IRQs.

 drivers/net/phy/realtek.c | 72 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index fb1db713b7fb..820b4e8ef23a 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -41,6 +41,12 @@
 #define RTL8211E_RX_DELAY			BIT(11)
 
 #define RTL8201F_ISR				0x1e
+#define RTL8201F_ISR_ANERR			BIT(15)
+#define RTL8201F_ISR_DUPLEX			BIT(13)
+#define RTL8201F_ISR_LINK			BIT(11)
+#define RTL8201F_ISR_MASK			(RTL8201F_ISR_ANERR | \
+						 RTL8201F_ISR_DUPLEX | \
+						 RTL8201F_ISR_LINK)
 #define RTL8201F_IER				0x13
 
 #define RTL8366RB_POWER_SAVE			0x15
@@ -149,6 +155,66 @@ static int rtl8211f_config_intr(struct phy_device *phydev)
 	return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
 }
 
+static irqreturn_t rtl8201_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, RTL8201F_ISR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & RTL8201F_ISR_MASK))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rtl821x_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status, irq_enabled;
+
+	irq_status = phy_read(phydev, RTL821x_INSR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	irq_enabled = phy_read(phydev, RTL821x_INER);
+	if (irq_enabled < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & irq_enabled))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rtl8211f_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & RTL8211F_INER_LINK_STATUS))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
 static int rtl8211_config_aneg(struct phy_device *phydev)
 {
 	int ret;
@@ -556,6 +622,7 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8201F Fast Ethernet",
 		.ack_interrupt	= &rtl8201_ack_interrupt,
 		.config_intr	= &rtl8201_config_intr,
+		.handle_interrupt = rtl8201_handle_interrupt,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 		.read_page	= rtl821x_read_page,
@@ -582,6 +649,7 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8211B Gigabit Ethernet",
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211b_config_intr,
+		.handle_interrupt = rtl821x_handle_interrupt,
 		.read_mmd	= &genphy_read_mmd_unsupported,
 		.write_mmd	= &genphy_write_mmd_unsupported,
 		.suspend	= rtl8211b_suspend,
@@ -601,6 +669,7 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8211DN Gigabit Ethernet",
 		.ack_interrupt	= rtl821x_ack_interrupt,
 		.config_intr	= rtl8211e_config_intr,
+		.handle_interrupt = rtl821x_handle_interrupt,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 		.read_page	= rtl821x_read_page,
@@ -611,6 +680,7 @@ static struct phy_driver realtek_drvs[] = {
 		.config_init	= &rtl8211e_config_init,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211e_config_intr,
+		.handle_interrupt = rtl821x_handle_interrupt,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 		.read_page	= rtl821x_read_page,
@@ -621,6 +691,7 @@ static struct phy_driver realtek_drvs[] = {
 		.config_init	= &rtl8211f_config_init,
 		.ack_interrupt	= &rtl8211f_ack_interrupt,
 		.config_intr	= &rtl8211f_config_intr,
+		.handle_interrupt = rtl8211f_handle_interrupt,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 		.read_page	= rtl821x_read_page,
@@ -670,6 +741,7 @@ static struct phy_driver realtek_drvs[] = {
 		 */
 		.ack_interrupt	= genphy_no_ack_interrupt,
 		.config_intr	= genphy_no_config_intr,
+		.handle_interrupt = genphy_handle_interrupt_no_ack,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 	},
-- 
2.28.0