Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ioana Ciornei <ciorneiioana@gmail.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Jakub Kicinski <kuba@kernel.org>, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Ioana Ciornei <ioana.ciornei@nxp.com>,
        Oleksij Rempel <o.rempel@pengutronix.de>,
        Michael Walle <michael@walle.cc>
Subject: [PATCH net-next v2 05/19] net: phy: at803x: remove the use of .ack_interrupt()
Date:   Sun,  1 Nov 2020 14:51:00 +0200
Message-Id: <20201101125114.1316879-6-ciorneiioana@gmail.com>
In-Reply-To: <20201101125114.1316879-1-ciorneiioana@gmail.com>
References: <20201101125114.1316879-1-ciorneiioana@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none

 drivers/net/phy/at803x.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index c7f91934cf82..d0b36fd6c265 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -614,6 +614,11 @@ static int at803x_config_intr(struct phy_device *phydev)
 	value = phy_read(phydev, AT803X_INTR_ENABLE);
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
 		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
 		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
@@ -621,9 +626,14 @@ static int at803x_config_intr(struct phy_device *phydev)
 		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
 
 		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
-	}
-	else
+	} else {
 		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
+		if (err)
+			return err;
+
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+	}
 
 	return err;
 }
@@ -1088,7 +1098,6 @@ static struct phy_driver at803x_driver[] = {
 	.resume			= at803x_resume,
 	/* PHY_GBIT_FEATURES */
 	.read_status		= at803x_read_status,
-	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
@@ -1109,7 +1118,6 @@ static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	/* PHY_BASIC_FEATURES */
-	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 }, {
@@ -1128,7 +1136,6 @@ static struct phy_driver at803x_driver[] = {
 	/* PHY_GBIT_FEATURES */
 	.read_status		= at803x_read_status,
 	.aneg_done		= at803x_aneg_done,
-	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
@@ -1149,7 +1156,6 @@ static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	/* PHY_BASIC_FEATURES */
-	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
@@ -1162,7 +1168,6 @@ static struct phy_driver at803x_driver[] = {
 	.resume			= at803x_resume,
 	.flags			= PHY_POLL_CABLE_TEST,
 	/* PHY_BASIC_FEATURES */
-	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
-- 
2.28.0