Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ioana Ciornei <ciorneiioana@gmail.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Jakub Kicinski <kuba@kernel.org>, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH net-next v2 13/19] net: phy: cicada: implement the generic .handle_interrupt() callback
Date:   Sun,  1 Nov 2020 14:51:08 +0200
Message-Id: <20201101125114.1316879-14-ciorneiioana@gmail.com>
In-Reply-To: <20201101125114.1316879-1-ciorneiioana@gmail.com>
References: <20201101125114.1316879-1-ciorneiioana@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ioana Ciornei <ioana.ciornei@nxp.com>

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - Adjust .handle_interrupt() so that we only take into account the
   enabled IRQs.

 drivers/net/phy/cicada.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index 9d1612a4d7e6..086c62ff5293 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -96,6 +96,24 @@ static int cis820x_config_intr(struct phy_device *phydev)
 	return err;
 }
 
+static irqreturn_t cis820x_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, MII_CIS8201_ISTAT);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & MII_CIS8201_IMASK_MASK))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
 /* Cicada 8201, a.k.a Vitesse VSC8201 */
 static struct phy_driver cis820x_driver[] = {
 {
@@ -106,6 +124,7 @@ static struct phy_driver cis820x_driver[] = {
 	.config_init	= &cis820x_config_init,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
+	.handle_interrupt = &cis820x_handle_interrupt,
 }, {
 	.phy_id		= 0x000fc440,
 	.name		= "Cicada Cis8204",
@@ -114,6 +133,7 @@ static struct phy_driver cis820x_driver[] = {
 	.config_init	= &cis820x_config_init,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
+	.handle_interrupt = &cis820x_handle_interrupt,
 } };
 
 module_phy_driver(cis820x_driver);
-- 
2.28.0