Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Sylwester Nawrocki <s.nawrocki@samsung.com>
To:     georgi.djakov@linaro.org, cw00.choi@samsung.com, krzk@kernel.org
Cc:     devicetree@vger.kernel.org, robh+dt@kernel.org,
        a.swigon@samsung.com, myungjoo.ham@samsung.com,
        inki.dae@samsung.com, sw0312.kim@samsung.com,
        b.zolnierkie@samsung.com, m.szyprowski@samsung.com,
        linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        linux-samsung-soc@vger.kernel.org, dri-devel@lists.freedesktop.org,
        linux-arm-kernel@lists.infradead.org, s.nawrocki@samsung.com
Subject: [PATCH v8 5/7] ARM: dts: exynos: Add interconnect properties to
 Exynos4412 bus nodes
Date:   Wed,  4 Nov 2020 11:36:55 +0100
Message-Id: <20201104103657.18007-6-s.nawrocki@samsung.com>
In-Reply-To: <20201104103657.18007-1-s.nawrocki@samsung.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20201104103657.18007-1-s.nawrocki@samsung.com>
        <CGME20201104103726eucas1p248b51b25f5ee42898bf03e9cb2229c5d@eucas1p2.samsung.com>
Precedence: bulk

This patch adds the following properties for Exynos4412 interconnect
bus nodes:
 - interconnects: to declare connections between nodes in order to
   guarantee PM QoS requirements between nodes,
 - #interconnect-cells: required by the interconnect framework,
 - samsung,data-clk-ratio: which allows to specify minimum data clock
   frequency corresponding to requested bandwidth for each bus.

Note that #interconnect-cells is always zero and node IDs are not
hardcoded anywhere.

Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes for v8:
 - none.

Changes for v7:
 - adjusted to the DT property changes: "interconnects" instead
   of "samsung,interconnect-parent", "samsung,data-clk-ratio"
   instead of "bus-width".

Changes for v6:
 - added bus-width property in bus_dmc node.

Changes for v5:
 - adjust to renamed exynos,interconnect-parent-node property,
 - add properties in common exynos4412.dtsi file rather than
   in Odroid specific odroid4412-odroid-common.dtsi.
---
 arch/arm/boot/dts/exynos4412.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e76881d..4999e68 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -383,6 +383,8 @@
 			clocks = <&clock CLK_DIV_DMC>;
 			clock-names = "bus";
 			operating-points-v2 = <&bus_dmc_opp_table>;
+			samsung,data-clock-ratio = <4>;
+			#interconnect-cells = <0>;
 			status = "disabled";
 		};
 
@@ -452,6 +454,8 @@
 			clocks = <&clock CLK_DIV_GDL>;
 			clock-names = "bus";
 			operating-points-v2 = <&bus_leftbus_opp_table>;
+			interconnects = <&bus_dmc>;
+			#interconnect-cells = <0>;
 			status = "disabled";
 		};
 
@@ -468,6 +472,8 @@
 			clocks = <&clock CLK_ACLK160>;
 			clock-names = "bus";
 			operating-points-v2 = <&bus_display_opp_table>;
+			interconnects = <&bus_leftbus &bus_dmc>;
+			#interconnect-cells = <0>;
 			status = "disabled";
 		};
 
-- 
2.7.4