Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: 7WWZG42s87v62/OEM4rXVvPzndKY/RCyjxwSlzi+an7rWvCuMSxgRQYMDkLS3tXeJqjUSbe2Vh
 Su16BovRdU3w6dyboJNzuVGOqYcL00Scu/rAJtqjMXX8xC8WYdx+RfMNV46SzrErl36JTuO9yC
 nAcSOuT5U7IF2dMSeBDjlz3Vj7O6uWoWmsfBw83c6ilXL2qWDzFrYJ7BH1iwxkIc+gx97MWxCi
 m89XuAxpfT5ablIeYR8i7TA5a1y9bMXuTKzMFGbiOp0nMF/noq38sqweDsHf5oYwSm8N3rktbv
 5Gc=
From:   Steen Hegelund <steen.hegelund@microchip.com>
To:     Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>
CC:     Steen Hegelund <steen.hegelund@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Lars Povlsen <lars.povlsen@microchip.com>,
        Bjarni Jonasson <bjarni.jonasson@microchip.com>,
        Microsemi List <microsemi@lists.bootlin.com>,
        Microchip UNG Driver List <UNGLinuxDriver@microchip.com>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v1 2/4] phy: Add ethernet serdes configuration option
Date:   Thu, 5 Nov 2020 15:44:27 +0100
Message-ID: <20201105144429.2438358-3-steen.hegelund@microchip.com>
In-Reply-To: <20201105144429.2438358-1-steen.hegelund@microchip.com>
References: <20201105144429.2438358-1-steen.hegelund@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Provide a new ethernet phy configuration structure, that
allow PHYs used for ethernet to be configured with
speed, media type and clock information.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
---
 include/linux/phy/phy-ethernet-serdes.h | 49 +++++++++++++++++++++++++
 include/linux/phy/phy.h                 |  4 ++
 2 files changed, 53 insertions(+)
 create mode 100644 include/linux/phy/phy-ethernet-serdes.h

diff --git a/include/linux/phy/phy-ethernet-serdes.h b/include/linux/phy/phy-ethernet-serdes.h
new file mode 100644
index 000000000000..04f496855b00
--- /dev/null
+++ b/include/linux/phy/phy-ethernet-serdes.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Microchip Sparx5 Ethernet SerDes driver
+ *
+ * Copyright (c) 2020 Microschip Inc
+ */
+#ifndef __PHY_ETHERNET_SERDES_H_
+#define __PHY_ETHERNET_SERDES_H_
+
+#include <linux/phy.h>
+
+enum ethernet_media_type {
+	ETH_MEDIA_DEFAULT,
+	ETH_MEDIA_SR,
+	ETH_MEDIA_DAC,
+};
+
+/**
+ * struct phy_configure_opts_eth_serdes - Ethernet SerDes
+ *
+ * This structure is used to represent the configuration state of a
+ * Ethernet Serdes PHY.
+ */
+struct phy_configure_opts_eth_serdes {
+	/**
+	 * @speed
+	 *
+	 * Speed of the serdes interface in Mbps
+	 */
+	u32                        speed;
+
+	/**
+	 * @media_type
+	 *
+	 * Specifies which media the serdes will be using
+	 */
+	enum ethernet_media_type   media_type;
+
+	/**
+	 * @clk
+	 *
+	 * Specifies the serdes clock in MHz
+	 * Default: 0 will provide the highest supported clock.
+	 */
+	u32                        clk;
+};
+
+#endif
+
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb0bab3..78ecb375cede 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -18,6 +18,7 @@
 
 #include <linux/phy/phy-dp.h>
 #include <linux/phy/phy-mipi-dphy.h>
+#include <linux/phy/phy-ethernet-serdes.h>
 
 struct phy;
 
@@ -49,11 +50,14 @@ enum phy_mode {
  *
  * @mipi_dphy:	Configuration set applicable for phys supporting
  *		the MIPI_DPHY phy mode.
+ * @eth_serdes: Configuration set applicable for phys supporting
+ *		the ethernet serdes.
  * @dp:		Configuration set applicable for phys supporting
  *		the DisplayPort protocol.
  */
 union phy_configure_opts {
 	struct phy_configure_opts_mipi_dphy	mipi_dphy;
+	struct phy_configure_opts_eth_serdes	eth_serdes;
 	struct phy_configure_opts_dp		dp;
 };
 
-- 
2.29.2