Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 6 Nov 2020 00:10:18 +0100
From:   Andreas Kemnade <andreas@kemnade.info>
To:     stephan@gerhold.net, rjw@rjwysocki.net, khilman@kernel.org,
        ulf.hansson@linaro.org, vireshk@kernel.org, nm@ti.com,
        sboyd@kernel.org, linux-pm@vger.kernel.org,
        linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, letux-kernel@openphoenux.org,
        stephan@gerhold.net
Subject: [REGRESSION] opp: Allow dev_pm_opp_get_opp_table() to return
 -EPROBE_DEFER
Message-ID: <20201106001018.02200778@aktux>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

On the GTA04 (DM3730, devicetree omap3-gta04*) I get my console flooded
up with the following:
[   24.517211] cpu cpu0: multiple regulators are not supported
[   24.523040] cpufreq: __target_index: Failed to change cpu frequency: -22
[   24.537231] ------------[ cut here ]------------
[   24.542083] WARNING: CPU: 0 PID: 5 at drivers/opp/core.c:678 dev_pm_opp_set_rate+0x23c/0x494
[   24.551086] Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs phy_twl4030_usb omap2430 musb_hdrc overlay
[   24.563842] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G        W         5.9.0-rc1-00008-g629238068eb9 #14
[   24.573852] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[   24.580413] Workqueue: events dbs_work_handler
[   24.585083] [<c010e6b4>] (unwind_backtrace) from [<c010a194>] (show_stack+0x10/0x14)
[   24.593200] [<c010a194>] (show_stack) from [<c0464ad0>] (dump_stack+0x8c/0xac)
[   24.600769] [<c0464ad0>] (dump_stack) from [<c01276a8>] (__warn+0xcc/0xe4)
[   24.608001] [<c01276a8>] (__warn) from [<c0127a3c>] (warn_slowpath_fmt+0x74/0xa0)
[   24.615844] [<c0127a3c>] (warn_slowpath_fmt) from [<c06364ac>] (dev_pm_opp_set_rate+0x23c/0x494)
[   24.625061] [<c06364ac>] (dev_pm_opp_set_rate) from [<c063ec08>] (set_target+0x2c/0x4c)
[   24.633453] [<c063ec08>] (set_target) from [<c063a950>] (__cpufreq_driver_target+0x190/0x22c)
[   24.642395] [<c063a950>] (__cpufreq_driver_target) from [<c063d4e0>] (od_dbs_update+0xcc/0x158)
[   24.651489] [<c063d4e0>] (od_dbs_update) from [<c063e090>] (dbs_work_handler+0x2c/0x54)
[   24.659881] [<c063e090>] (dbs_work_handler) from [<c013f71c>] (process_one_work+0x210/0x358)
[   24.668731] [<c013f71c>] (process_one_work) from [<c0140014>] (worker_thread+0x22c/0x2d0)
[   24.677307] [<c0140014>] (worker_thread) from [<c0144eac>] (kthread+0x140/0x14c)
[   24.685058] [<c0144eac>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
[   24.692626] Exception stack(0xde4b7fb0 to 0xde4b7ff8)
[   24.697906] 7fa0:                                     00000000 00000000 00000000 00000000
[   24.706481] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   24.715057] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   24.722198] ---[ end trace 038b3f231fae6f81 ]---

endlessly after the $subject commit. Any hints?

Regards,
Andreas