Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v5 0/4] DCMI BT656 parallel bus mode support
To:     Hugues Fruchet <hugues.fruchet@st.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Hans Verkuil <hverkuil@xs4all.nl>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Rob Herring <robh+dt@kernel.org>
CC:     <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        Alain Volmat <alain.volmat@st.com>,
        Yannick Fertre <yannick.fertre@st.com>,
        Philippe CORNU <philippe.cornu@st.com>
References: <1604511132-4014-1-git-send-email-hugues.fruchet@st.com>
From:   Alexandre Torgue <alexandre.torgue@st.com>
Message-ID: <e7358059-8c19-d69d-4e00-c30a2e44e335@st.com>
Date:   Mon, 9 Nov 2020 12:16:08 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.10.0
MIME-Version: 1.0
In-Reply-To: <1604511132-4014-1-git-send-email-hugues.fruchet@st.com>
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi Hugues

On 11/4/20 6:32 PM, Hugues Fruchet wrote:
> Add support of BT656 embedded synchronization bus.
> This mode allows to save hardware synchro lines hsync & vsync
> by replacing them with synchro codes embedded in data stream.
> Add "bus-type" property and make it required so that there is no
> ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6).
> 
> ===========
> = history =
> ===========
> version 5:
>    - Add revisited bindings and devicetree with explicit use of "bus-type"
> 
> version 4:
>    - Fix typo in commit message
> 
> version 3:
>    - Fix bus_width print to %u as per Sakari comment
> 
> version 2:
>    - As per Sakari remark, revisit commit message and document
>      BT656 parallel bus mode in bindings
> 
> version 1:
>    - Initial submission
> 
> Hugues Fruchet (4):
>    media: stm32-dcmi: add support of BT656 bus
>    media: dt-bindings: media: st,stm32-dcmi: add support of BT656 bus
>    ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1
>      board
>    ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval
>      board
> 
>   .../devicetree/bindings/media/st,stm32-dcmi.yaml   | 38 ++++++++++++++++++++++
>   arch/arm/boot/dts/stm32429i-eval.dts               |  1 +
>   arch/arm/boot/dts/stm32mp157c-ev1.dts              |  1 +
>   drivers/media/platform/stm32/stm32-dcmi.c          | 37 +++++++++++++++++++--
>   4 files changed, 75 insertions(+), 2 deletions(-)
> 

DT patches applied on stm32-next.

Cheers
Alex