Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 9 Nov 2020 17:11:21 +0530
From:   Vinod Koul <vkoul@kernel.org>
To:     Jonathan McDowell <noodles@earth.li>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Dan Williams <dan.j.williams@intel.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Thomas Pedersen <twp@codeaurora.org>,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        dmaengine@vger.kernel.org
Subject: Re: [PATCH v4] dmaengine: qcom: Add ADM driver
Message-ID: <20201109114121.GG3171@vkoul-mobl>
References: <20200916064326.GA13963@earth.li>
 <20200919185739.GS3411@earth.li>
 <20200920181204.GT3411@earth.li>
 <20200923194056.GY3411@earth.li>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200923194056.GY3411@earth.li>
Precedence: bulk

HI Jonathan,

On 23-09-20, 20:40, Jonathan McDowell wrote:
> Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
> controller found in the MSM8x60 and IPQ/APQ8064 platforms.

Mostly it looks good, some nitpicks

> The ADM supports both memory to memory transactions and memory
> to/from peripheral device transactions.  The controller also provides
> flow control capabilities for transactions to/from peripheral devices.
> 
> The initial release of this driver supports slave transfers to/from
> peripherals and also incorporates CRCI (client rate control interface)
> flow control.

Can you also convert the binding from txt to yaml?

> diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
> index 3bcb689162c6..0389d60d2604 100644
> --- a/drivers/dma/qcom/Kconfig
> +++ b/drivers/dma/qcom/Kconfig
> @@ -1,4 +1,15 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +config QCOM_ADM
> +	tristate "Qualcomm ADM support"
> +	depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT

why !PHYS_ADDR_T_64BIT ..?

> +	select DMA_ENGINE
> +	select DMA_VIRTUAL_CHANNELS
> +	help
> +	  Enable support for the Qualcomm Application Data Mover (ADM) DMA
> +	  controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
> +	  This controller provides DMA capabilities for both general purpose
> +	  and on-chip peripheral devices.

> +static const struct of_device_id adm_of_match[] = {
> +	{ .compatible = "qcom,adm", },

I know we have merged the binding, but should we not have a soc specific
compatible?

-- 
~Vinod