Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Frank Lee <frank@allwinnertech.com>
To:     vkoul@kernel.org, robh+dt@kernel.org, mripard@kernel.org,
        wens@csie.org, ulf.hansson@linaro.org, kishon@ti.com,
        wim@linux-watchdog.org, linux@roeck-us.net,
        dan.j.williams@intel.com, linus.walleij@linaro.org,
        wsa+renesas@sang-engineering.com, dianders@chromium.org,
        marex@denx.de, colin.king@canonical.com, rdunlap@infradead.org,
        krzk@kernel.org, gregkh@linuxfoundation.org, megous@megous.com,
        rikard.falkeborn@gmail.com, dmaengine@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
        linux-watchdog@vger.kernel.org, linux-gpio@vger.kernel.org,
        tiny.windzz@gmail.com
Cc:     Yangtao Li <frank@allwinnertech.com>
Subject: [PATCH 05/19] dmaengine: sun6i: Add support for A100 DMA
Date:   Tue, 10 Nov 2020 12:05:39 +0800
Message-Id: <20201110040553.1381-6-frank@allwinnertech.com>
In-Reply-To: <20201110040553.1381-1-frank@allwinnertech.com>
References: <20201110040553.1381-1-frank@allwinnertech.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Yangtao Li <frank@allwinnertech.com>

The dma of a100 is similar to h6, with some minor changes to
support greater addressing capabilities.

Add support for it.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
---
 drivers/dma/sun6i-dma.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index f5f9c86c50bc..5cadd4d2b824 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -1173,6 +1173,30 @@ static struct sun6i_dma_config sun50i_a64_dma_cfg = {
 			     BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
 };
 
+/*
+ * TODO: Add support for more than 4g physical addressing.
+ *
+ * The A100 binding uses the number of dma channels from the
+ * device tree node.
+ */
+static struct sun6i_dma_config sun50i_a100_dma_cfg = {
+	.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
+	.set_burst_length = sun6i_set_burst_length_h3,
+	.set_drq          = sun6i_set_drq_h6,
+	.set_mode         = sun6i_set_mode_h6,
+	.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+	.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+	.src_addr_widths   = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+			     BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+			     BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+			     BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+	.dst_addr_widths   = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+			     BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+			     BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+			     BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+	.has_mbus_clk = true,
+};
+
 /*
  * The H6 binding uses the number of dma channels from the
  * device tree node.
@@ -1225,6 +1249,7 @@ static const struct of_device_id sun6i_dma_match[] = {
 	{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
 	{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
 	{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
+	{ .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
 	{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
 	{ /* sentinel */ }
 };
-- 
2.28.0