Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
To:     Mathias Nyman <mathias.nyman@intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:     linux-usb <linux-usb@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        linux-pci@vger.kernel.org
From:   Hans de Goede <hdegoede@redhat.com>
Subject: 5.10 regression, many XHCI swiotlb buffer is full / DMAR: Device
 bounce map failed errors on thunderbolt connected XHCI controller
Message-ID: <b046dd04-ac4f-3c69-0602-af810fb1b365@redhat.com>
Date:   Tue, 10 Nov 2020 12:36:47 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.3.1
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi All,

Not sure if this is a XHCI driver problem at all, but I needed to start
somewhere with reporting this so I went with:

scripts/get_maintainer.pl -f drivers/usb/host/xhci-pci.c

And added a Cc: linux-pci@vger.kernel.org as bonus.

I'm seeing the following errors and very slow network performance with
the USB NIC in a Lenovo Thunderbolt gen 2 dock.

Note that the USB NIC is connected to the XHCI controller which is
embedded inside the dock and is connected over thunderbolt!

So the errors are:

[ 1148.744205] swiotlb_tbl_map_single: 6 callbacks suppressed
[ 1148.744210] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.744218] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@1411c0000 dir 1 --- failed
[ 1148.744226] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1148.744368] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.744375] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 16ea@10aabc000 dir 1 --- failed
[ 1148.744381] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1148.745141] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.745148] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@1411c0000 dir 1 --- failed
[ 1148.745155] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1148.951282] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1148.951388] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 118e@140988000 dir 1 --- failed
[ 1148.951420] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.013342] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.013357] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 1d2a@1411c0000 dir 1 --- failed
[ 1151.013373] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.018660] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 18 (slots)
[ 1151.018696] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@1411c0000 dir 1 --- failed
[ 1151.018711] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.223022] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.223102] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
[ 1151.223133] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.228810] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.228870] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
[ 1151.228898] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11
[ 1151.234792] xhci_hcd 0000:0a:00.0: swiotlb buffer is full (sz: 8192 bytes), total 32768 (slots), used 16 (slots)
[ 1151.234852] xhci_hcd 0000:0a:00.0: DMAR: Device bounce map: 11da@10aabc000 dir 1 --- failed
[ 1151.234882] r8152 4-2.1.2:1.0 ens1u2u1u2: failed tx_urb -11

etc.

This happens as soon as I generate any serious amount of outgoing network traffic. E.g. rsyncing files
to another machine.

Regards,

Hans