Received: by 2002:a05:6a10:16a7:0:0:0:0 with SMTP id gp39csp4024922pxb; Tue, 10 Nov 2020 06:15:44 -0800 (PST) X-Google-Smtp-Source: ABdhPJxI7/E1Wjek8m9cEzw5QSTPtLwMHs80zlqxjRnn7xryhvhOUkkOt2tvAn3siJLCx9VIHfAK X-Received: by 2002:aa7:d48d:: with SMTP id b13mr20468899edr.264.1605017744611; Tue, 10 Nov 2020 06:15:44 -0800 (PST) ARC-Seal: i=2; a=rsa-sha256; t=1605017744; cv=pass; d=google.com; s=arc-20160816; b=u6h2lq/dmAH0swfLkSpGCkDzKsaO9vZ9C2fHw38lVuROh3xuaYIjpf1qJdD4oaxGRF F+JVIxfpHOx+WMuzXz+GIZ+i+XO2g3MvDcUMPSZdGO47yJ1+WkEWBv+NXzT7RzkNwW0E 4wMUtAOqO2uG2VFcwpf+4ksR8znqQ5wZ4QHAXVoPfe+0XmZHr9MQK/kuEw/MoJ6Pazql ablWAC6TwUz3sAoXuoys2Mq2lM2Iv68sTk3VczepQMd8AkfCmXcfS3ZLLxv4IFgVCL2a 6MJlysLiH7XgyGQ2PnRG0jqctroSM7ssy0R9/QxC3dTVWMdQrnd2IWu1j1QqQ24q2rhW GiQw== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:references:in-reply-to:message-id :date:subject:cc:to:from:dkim-signature; bh=81ois8JkR6huE2zmTGy3Q2OM7DEcR8vy4z8TwyXlPwY=; b=iqQHGUP1+MeInfOESo4+iVUzus/mdwnCla9o+U0SYnhAaWLZUOsuZog0abbIgt+QeG Z+zkUziaM8dK9Ny4X8rlakxxmAkkO52BaId7Eyn1QEeC9Z37b2Y6hthjM+3UjJ+L+h6b XgVirfzmJwwZ6g83TKvW7g0KPHSFoC/Q2k4C4qRA8dBWWRHiysFSreb7OzVQq5yc2RwA h3aUQO1oc9XCh+hn3wpRE9ZgfHyz6eiQDWY6aIlueLg1mWcRIJvg5Mg9KtCnwxd5kAxw KKumE+0GNy93Jg5Y6bisUoyyl6CZm0jAdjV2zaAx8a+GSN65WHXktFRuqQkIpRO/BJLx B7dg== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@NXP1.onmicrosoft.com header.s=selector2-NXP1-onmicrosoft-com header.b=lLFQwV3D; arc=pass (i=1 spf=pass spfdomain=oss.nxp.com dkim=pass dkdomain=oss.nxp.com dmarc=pass fromdomain=oss.nxp.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=nxp.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id k6si9224786edl.228.2020.11.10.06.15.19; Tue, 10 Nov 2020 06:15:44 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@NXP1.onmicrosoft.com header.s=selector2-NXP1-onmicrosoft-com header.b=lLFQwV3D; arc=pass (i=1 spf=pass spfdomain=oss.nxp.com dkim=pass dkdomain=oss.nxp.com dmarc=pass fromdomain=oss.nxp.com); spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=nxp.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1732226AbgKJOM4 (ORCPT + 99 others); Tue, 10 Nov 2020 09:12:56 -0500 Received: from mail-eopbgr30044.outbound.protection.outlook.com ([40.107.3.44]:52782 "EHLO EUR03-AM5-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726721AbgKJOMz (ORCPT ); Tue, 10 Nov 2020 09:12:55 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=gw8xRmzoeyN35uA9flT3l7Lg6l3xc5XHTuPxHMr1ljEiDcmrz/7Fn2N1IAd3xn4abk2o9f6CdXCuLXrhsUWmC+2ucwQahNn/bJ8+HZ8REWaqsMkbLFAUpofbTExl4NHG3wLYvZVlByIDiApx88e5apLytLSREKk4VyViMLUhIezwfYG21cIuhDohj3Pka9+09dx0krZJ74UkrjhibgtloaUiZGPMeoobd2Uv2TUtbGaUvQnndPLIUBQ/5UzAU6cPK/ux6Juf+xK431LGHMg5SwSqbc9yB47cp6yrS9Sf4ODCSrlmK6wzY4py3XSFYxDPwg6wn7lZZitrWoWvd5uOEA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=81ois8JkR6huE2zmTGy3Q2OM7DEcR8vy4z8TwyXlPwY=; b=laQsYUBkMTgntuHllpx12FAnkY8ZwvVf2HOVYBWqPLTejbjhs/hxijWeSWh7m4wO/IwOdTOIfRFdTEO+nvKd3jLx0grb/ESU4Q2osBoXD/oecG1tBkyLCBfOVoSgnUAkN4Py1u2G+nDM5mfx/3YW5sqEs5PnRPvSQ82tgEhKen2eRbrITw2E9UUkTdwBEVoQNsi9Mfv1gJ/fgYSvEjVapSKFe2C52cT6k+v6Uyj04DcgDIdONMYuZ4nZifi5A0hq5nzR1HP9obApip1MhGyQoldaN8IEaLgo9zkFxuJgBOr+HbBwqlVkH8ZFoNnRH/S2EiI06Pittc8BToc2jiqU6Q== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=oss.nxp.com; dmarc=pass action=none header.from=oss.nxp.com; dkim=pass header.d=oss.nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NXP1.onmicrosoft.com; s=selector2-NXP1-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=81ois8JkR6huE2zmTGy3Q2OM7DEcR8vy4z8TwyXlPwY=; b=lLFQwV3DroTnhEX7ZhViZcfZdQWNz5yCdb04X72v814RPF0Z0qhHFlRcmTxnBHKFV2XJo77RmQWygjGgfzVnt13kWnUdPR5ChLQRcBhyahNW0/EvmQu8GExRU6W6aeSB5V3x2p4effYDUV2p7/gy41HrEcMNUj94B2mrt2T5V3o= Authentication-Results: kernel.org; dkim=none (message not signed) header.d=none;kernel.org; dmarc=none action=none header.from=oss.nxp.com; Received: from AM4PR0401MB2401.eurprd04.prod.outlook.com (2603:10a6:200:47::26) by AM0PR04MB4931.eurprd04.prod.outlook.com (2603:10a6:208:c1::14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3499.27; Tue, 10 Nov 2020 14:12:38 +0000 Received: from AM4PR0401MB2401.eurprd04.prod.outlook.com ([fe80::fd3f:1280:bcea:2ab5]) by AM4PR0401MB2401.eurprd04.prod.outlook.com ([fe80::fd3f:1280:bcea:2ab5%8]) with mapi id 15.20.3541.025; Tue, 10 Nov 2020 14:12:38 +0000 From: franck.lenormand@oss.nxp.com To: shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com Cc: franck.lenormand@oss.nxp.com, kernel@pengutronix.de, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, aisheng.dong@nxp.com, abel.vesa@nxp.com, Anson.Huang@nxp.com, linux@rempel-privat.de, leonard.crestez@nxp.com, daniel.baluta@nxp.com, qiangqing.zhang@nxp.com, peng.fan@nxp.com Subject: [PATCH V3 5/5] soc: imx8: Add the SC SECVIO driver Date: Tue, 10 Nov 2020 15:12:14 +0100 Message-Id: <1605017534-87305-6-git-send-email-franck.lenormand@oss.nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1605017534-87305-1-git-send-email-franck.lenormand@oss.nxp.com> References: <1605017534-87305-1-git-send-email-franck.lenormand@oss.nxp.com> Content-Type: text/plain X-Originating-IP: [81.1.10.98] X-ClientProxiedBy: AM4PR0101CA0083.eurprd01.prod.exchangelabs.com (2603:10a6:200:41::51) To AM4PR0401MB2401.eurprd04.prod.outlook.com (2603:10a6:200:47::26) MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 Received: from SOPDPUATS05.ea.freescale.net (81.1.10.98) by AM4PR0101CA0083.eurprd01.prod.exchangelabs.com (2603:10a6:200:41::51) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.20.3541.21 via Frontend Transport; Tue, 10 Nov 2020 14:12:24 +0000 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-HT: Tenant X-MS-Office365-Filtering-Correlation-Id: cff2b9fa-cacd-42a2-32b9-08d88582a632 X-MS-TrafficTypeDiagnostic: AM0PR04MB4931: X-MS-Exchange-SharedMailbox-RoutingAgent-Processed: True X-MS-Exchange-Transport-Forked: True X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:12; X-MS-Exchange-SenderADCheck: 1 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: M6jRsSlfxfEEtEna3kH4130WYFfHvk9pXuNfZWGgeDdLd/OL45oPn5IR0Du4mUngqBR5rvx5sjacQ4nI+6Hd/7SlOq2lwal8R63ugeMdIi90OMzDCIYsZiV1tRWAAyrCP9mNwLmX2lqLqhoupn0SOk5Rk1Exq4UoIJ5LHiynbp1Kt3idXiduZFh4YZSUvTcq4NWJ0a6rUv29xDMdD2UiUidUfeu7D+RiqoZDuiqUZQJezwPmhrxpmSSfEas81g1VSp0zrUj6i/E7f8hA//3q1KPo8d3aO5DRnlO1uPiG3ZPHELPmkm7H9XAz9+lQeddqs6iSd0H2en8bszxvDX+Hyg== X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:AM4PR0401MB2401.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(4636009)(366004)(498600001)(2906002)(2616005)(16526019)(8676002)(9686003)(186003)(66556008)(66946007)(5660300002)(6486002)(30864003)(6506007)(52116002)(26005)(956004)(6666004)(83380400001)(6512007)(86362001)(66476007)(4326008)(8936002)(579004);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData: 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 X-OriginatorOrg: oss.nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: cff2b9fa-cacd-42a2-32b9-08d88582a632 X-MS-Exchange-CrossTenant-AuthSource: AM4PR0401MB2401.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 10 Nov 2020 14:12:25.8383 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: GZTE/aJ2uTAY4oYJcxkf6PFIBVycyAhsSzPurFv1K1OEbSw3Ilti78WSpc91UcOvkXn1wcOM93YdQdbCAUrQ/feWS9s7egV3o/bH6PSU1cY= X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM0PR04MB4931 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Franck LENORMAND The SNVS is a hardware component in the imx8 SoC. One of its function is to detect hardware attacks, in which case it creates a SECurity VIOlation. This patch adds the support for the reception of these secvio and report it to the audit framework. It also gives the possibility to perform custom processing when a secvio is detected. Signed-off-by: Franck LENORMAND --- drivers/soc/imx/Kconfig | 10 + drivers/soc/imx/Makefile | 1 + drivers/soc/imx/secvio/Kconfig | 10 + drivers/soc/imx/secvio/Makefile | 3 + drivers/soc/imx/secvio/imx-secvio-audit.c | 39 ++ drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 ++++++++++++ drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 +++ drivers/soc/imx/secvio/imx-secvio-sc.c | 858 ++++++++++++++++++++++++++++ include/soc/imx/imx-secvio-sc.h | 177 ++++++ 9 files changed, 1561 insertions(+) create mode 100644 drivers/soc/imx/secvio/Kconfig create mode 100644 drivers/soc/imx/secvio/Makefile create mode 100644 drivers/soc/imx/secvio/imx-secvio-audit.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c create mode 100644 include/soc/imx/imx-secvio-sc.h diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index a9370f4..6c1bc78 100644 --- a/drivers/soc/imx/Kconfig +++ b/drivers/soc/imx/Kconfig @@ -19,4 +19,14 @@ config SOC_IMX8M support, it will provide the SoC info like SoC family, ID and revision etc. +config SECVIO_SC + tristate "NXP SC secvio support" + depends on IMX_SCU + help + If you say yes here you get support for the NXP SNVS security + violation module. It includes the possibility to read information + related to security violations and tampers. It also gives the + possibility to register user callbacks when a security violation + occurs. + endmenu diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index 078dc91..c91a499 100644 --- a/drivers/soc/imx/Makefile +++ b/drivers/soc/imx/Makefile @@ -5,3 +5,4 @@ endif obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o +obj-${CONFIG_SECVIO_SC} += secvio/ diff --git a/drivers/soc/imx/secvio/Kconfig b/drivers/soc/imx/secvio/Kconfig new file mode 100644 index 0000000..dcfaea5 --- /dev/null +++ b/drivers/soc/imx/secvio/Kconfig @@ -0,0 +1,10 @@ +config SECVIO_SC + tristate "NXP SC secvio support" + depends on IMX_SCU + help + If you say yes here you get support for the NXP SNVS security + violation module. It includes the possibility to read information + related to security violations and tampers. It also gives the + possibility to register user callbacks when a security violation + occurs. + diff --git a/drivers/soc/imx/secvio/Makefile b/drivers/soc/imx/secvio/Makefile new file mode 100644 index 0000000..d5a89ba --- /dev/null +++ b/drivers/soc/imx/secvio/Makefile @@ -0,0 +1,3 @@ +obj-y += imx-secvio-sc.o +obj-$(CONFIG_DEBUG_FS) += imx-secvio-debugfs.o +obj-$(CONFIG_AUDIT) += imx-secvio-audit.o diff --git a/drivers/soc/imx/secvio/imx-secvio-audit.c b/drivers/soc/imx/secvio/imx-secvio-audit.c new file mode 100644 index 0000000..dc96e16 --- /dev/null +++ b/drivers/soc/imx/secvio/imx-secvio-audit.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + */ + +#include + +#include + +/** + * report_to_audit_notify() - Report secvio and tamper status to audit FW + * + * This function can be chained in a notifier list + * + * @nb: notifier block + * @status: error code + * @notif_info: Pointer on secvio_sc_notifier_info structure + * + * Return: + * 0 - OK + * < 0 - error. + */ +int report_to_audit_notify(struct notifier_block *nb, unsigned long status, + void *notif_info) +{ + struct audit_buffer *ab; + struct secvio_sc_notifier_info *info = notif_info; + + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_INTEGRITY_RULE); + if (!ab) + return -ENOMEM; + + audit_log_format(ab, " hpsvs=0x%.08x lps=0x%.08x lptds=0x%.08x", + info->hpsvs, info->lps, info->lptds); + audit_log_task_info(ab); + audit_log_end(ab); + + return 0; +} diff --git a/drivers/soc/imx/secvio/imx-secvio-debugfs.c b/drivers/soc/imx/secvio/imx-secvio-debugfs.c new file mode 100644 index 0000000..bcbd77a --- /dev/null +++ b/drivers/soc/imx/secvio/imx-secvio-debugfs.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + */ + +/* + * The module exposes 3 files in debugfs: + * - secvio/info: + * * Read: It returns the value of the fuses and SNVS registers which are + * readable and related to secvio and tampers + * * Write: A write of the format " [ + * ]()" + * will write the SNVS register having the provided id with the + * values provided (cf SECO documentation) + * - secvio/enable: State of the IRQ + * - secvio/check: Check the state of the security violation and tampers + * and calls notifier + * - secvio/clear: Clear the state of all secvio and tampers + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include "imx-secvio-sc-int.h" + +/** + * fuse_reader() - Read a set of fuse + * + * @dev: secvio device + * @id: offset of the fuse + * @value: array of values read + * @mul: number of fuse to read + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int fuse_reader(struct device *dev, u32 id, u32 *value, u8 mul) +{ + struct imx_secvio_sc_data *data = dev_get_drvdata(dev); + u32 size_to_read = mul * sizeof(u32); + int ret; + + ret = nvmem_device_read(data->nvmem, id, size_to_read, value); + if (ret < 0) { + dev_err(data->dev, "Failed to read fuse %d: %d\n", id, ret); + return ret; + } + + if (ret != size_to_read) { + dev_err(data->dev, "Read only %d instead of %d\n", ret, + size_to_read); + return -ENOMEM; + } + + return 0; +} + +/** + * snvs_reader() - Read a set of SNVS register + * + * @dev: secvio device + * @id: offset of the register + * @value: array of values read + * @mul: number of registers to read + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int snvs_reader(struct device *dev, u32 id, u32 *value, u8 mul) +{ + int ret; + u32 *v1, *v2, *v3, *v4, *v5; + + v1 = NULL; + v2 = NULL; + v3 = NULL; + v4 = NULL; + v5 = NULL; + + switch (mul) { + case 5: + v5 = &value[4]; + fallthrough; + case 4: + v4 = &value[3]; + fallthrough; + case 3: + v3 = &value[2]; + fallthrough; + case 2: + v2 = &value[1]; + fallthrough; + case 1: + v1 = &value[0]; + break; + default: + return -EINVAL; + } + + ret = call_secvio_config(dev, id, SECVIO_CONFIG_READ, v1, v2, v3, v4, + v5, mul); + if (ret < 0) + dev_err(dev, "Failed to read snvs reg %d: %d\n", id, ret); + + return ret; +} + +/** + * snvs_dgo_reader() - Read a set of DGO register + * + * @dev: secvio device + * @id: offset of the register + * @value: array of values read + * @mul: number of registers to read + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int snvs_dgo_reader(struct device *dev, u32 id, u32 *value, u8 mul) +{ + struct imx_secvio_sc_data *data = dev_get_drvdata(dev); + int ret; + + /* We check that we only have 1 register to read */ + if (mul != 1) + return -EINVAL; + + ret = imx_sc_seco_secvio_dgo_config(data->ipc_handle, id, + SECVIO_CONFIG_READ, value); + if (ret) + dev_err(dev, "Failed to read snvs dgo reg %d: %d\n", id, ret); + + return ret; +} + +static const struct imx_secvio_info_entry { + int (*reader)(struct device *dev, u32 id, u32 *value, u8 mul); + const char *type; + const char *name; + u32 id; + u8 mul; +} gs_imx_secvio_info_list[] = { + {fuse_reader, "fuse", "trim", 30, 1}, + {fuse_reader, "fuse", "trim2", 31, 1}, + {fuse_reader, "fuse", "ctrim1", 260, 1}, + {fuse_reader, "fuse", "ctrim2", 261, 1}, + {fuse_reader, "fuse", "ctrim3", 262, 1}, + {fuse_reader, "fuse", "ctrim4", 263, 1}, + {fuse_reader, "fuse", "OSC_CAP", 768, 1}, + + {snvs_reader, "snvs", "HPLR", 0x0, 1}, + {snvs_reader, "snvs", "LPLR", 0x34, 1}, + {snvs_reader, "snvs", "HPSICR", 0xc, 1}, + {snvs_reader, "snvs", "HPSVCR", 0x10, 1}, + {snvs_reader, "snvs", "HPSVS", 0x18, 1}, + {snvs_reader, "snvs", "LPSVC", 0x40, 1}, + {snvs_reader, "snvs", "LPTDC", 0x48, 2}, + {snvs_reader, "snvs", "LPSR", 0x4c, 1}, + {snvs_reader, "snvs", "LPTDS", 0xa4, 1}, + {snvs_reader, "snvs", "LPTGFC", 0x44, 3}, + {snvs_reader, "snvs", "LPATCTL", 0xe0, 1}, + {snvs_reader, "snvs", "LPATCLK", 0xe4, 1}, + {snvs_reader, "snvs", "LPATRC1", 0xe8, 2}, + {snvs_reader, "snvs", "LPMKC", 0x3c, 1}, + {snvs_reader, "snvs", "LPSMC", 0x5c, 2}, + {snvs_reader, "snvs", "LPPGD", 0x64, 1}, + {snvs_reader, "snvs", "HPVID", 0xf8, 2}, + + {snvs_dgo_reader, "dgo", "Offset", 0x0, 1}, + {snvs_dgo_reader, "dgo", "PUP/PD", 0x10, 1}, + {snvs_dgo_reader, "dgo", "Anatest", 0x20, 1}, + {snvs_dgo_reader, "dgo", "T trim", 0x30, 1}, + {snvs_dgo_reader, "dgo", "Misc", 0x40, 1}, + {snvs_dgo_reader, "dgo", "Vmon", 0x50, 1}, +}; + +struct imx_secvio_sc_info_seq_data { + struct device *dev; + const struct imx_secvio_info_entry *list; + int size; +}; + +/** + * imx_secvio_sc_info_seq_start() - Start sequence + * + * @m: seq file + * @pos: position in the sequence + * + * Return pointer on position + */ +static void *imx_secvio_sc_info_seq_start(struct seq_file *m, loff_t *pos) +{ + struct imx_secvio_sc_info_seq_data *data = m->private; + + /* Check we are not out of bound */ + if (*pos >= data->size) + return NULL; + + return (void *)pos; +} + +/** + * imx_secvio_sc_info_seq_next() - Iterate sequence + * + * @m: seq file + * @v: pointer + * @pos: position in the sequence + * + * Return pointer on position + */ +static void *imx_secvio_sc_info_seq_next(struct seq_file *m, void *v, loff_t *pos) +{ + /* Increment the counter */ + ++*pos; + + /* call the start function which will check the index */ + return imx_secvio_sc_info_seq_start(m, pos); +} + +/** + * imx_secvio_sc_info_seq_stop() - Stop sequence + * + * @m: seq file + * @v: pointer + */ +static void imx_secvio_sc_info_seq_stop(struct seq_file *m, void *v) +{ +} + +/** + * imx_secvio_sc_info_seq_show() - Show the item in the sequence + * + * @m: seq file + * @v: pointer + * @pos: position in the sequence + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int imx_secvio_sc_info_seq_show(struct seq_file *m, void *v) +{ + struct imx_secvio_sc_info_seq_data *data = m->private; + const struct imx_secvio_info_entry *e; + int ret; + u32 vals[5]; + int idx; + + idx = *(loff_t *)v; + e = &data->list[idx]; + + /* Read the values */ + ret = e->reader(data->dev, e->id, (u32 *)&vals, e->mul); + if (ret) { + dev_err(data->dev, "Fail to read %s %s (idx %d)\n", e->type, + e->name, e->id); + return 0; + } + + seq_printf(m, "%5s/%-10s(%.3d):", e->type, e->name, e->id); + + /* Loop over the values */ + for (idx = 0; idx < e->mul; idx++) + seq_printf(m, " %.8x", vals[idx]); + + seq_puts(m, "\n"); + + return 0; +} + +static const struct seq_operations imx_secvio_sc_info_seq_ops = { + .start = imx_secvio_sc_info_seq_start, + .next = imx_secvio_sc_info_seq_next, + .stop = imx_secvio_sc_info_seq_stop, + .show = imx_secvio_sc_info_seq_show, +}; + +/** + * imx_secvio_sc_info_open() - Store node info for ioctl + * + * @inode: inode + * @file: file used to perform the ioctl + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int imx_secvio_sc_info_open(struct inode *inode, struct file *file) +{ + struct imx_secvio_sc_info_seq_data *data; + + data = __seq_open_private(file, &imx_secvio_sc_info_seq_ops, sizeof(*data)); + if (!data) + return -ENOMEM; + + data->dev = inode->i_private; + data->list = gs_imx_secvio_info_list; + data->size = ARRAY_SIZE(gs_imx_secvio_info_list); + + return 0; +} + +static const struct file_operations imx_secvio_sc_info_ops = { + .owner = THIS_MODULE, + .open = imx_secvio_sc_info_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, +}; + +/** + * if_debugfs_remove_recursive() - Wrapper for debugfs_remove_recursive + * + * Can be used with devm + * + * @dentry: directory entry + */ +static void if_debugfs_remove_recursive(void *dentry) +{ + debugfs_remove_recursive(dentry); +} + +/** + * imx_secvio_sc_debugfs() - Create the debugfs + * + * @dev: secvio device + * + * Return: + * 0 - OK + * < 0 - error. + */ +int imx_secvio_sc_debugfs(struct device *dev) +{ + struct imx_secvio_sc_data *data = dev_get_drvdata(dev); + struct dentry *dir; + int ret = 0; + + /* Create a folder */ + dir = debugfs_create_dir(dev_name(dev), NULL); + if (IS_ERR(dir)) { + dev_err(dev, "Failed to create dfs dir\n"); + ret = PTR_ERR(dir); + goto exit; + } + data->dfs = dir; + + ret = devm_add_action(dev, if_debugfs_remove_recursive, data->dfs); + if (ret) { + dev_err(dev, "Failed to add managed action to disable IRQ\n"); + goto remove_fs; + } + + /* Create the file to read info and write to reg */ + dir = debugfs_create_file("info", 0x666, data->dfs, dev, + &imx_secvio_sc_info_ops); + if (IS_ERR(dir)) { + dev_err(dev, "Failed to add info to debugfs\n"); + ret = PTR_ERR(dir); + goto exit; + } + + goto exit; + +remove_fs: + debugfs_remove_recursive(data->dfs); + +exit: + return ret; +} diff --git a/drivers/soc/imx/secvio/imx-secvio-sc-int.h b/drivers/soc/imx/secvio/imx-secvio-sc-int.h new file mode 100644 index 0000000..54de7fa --- /dev/null +++ b/drivers/soc/imx/secvio/imx-secvio-sc-int.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019-2020 NXP + */ + +#ifndef SECVIO_SC_H +#define SECVIO_SC_H + +/* Includes */ +#include +#include +#include +#include +#include + +/* Access for sc_seco_secvio_config API */ +#define SECVIO_CONFIG_READ 0 +#define SECVIO_CONFIG_WRITE 1 + +/* Internal Structure */ +struct imx_secvio_sc_data { + struct device *dev; + + struct imx_sc_ipc *ipc_handle; + + struct notifier_block irq_nb; + struct notifier_block report_nb; + struct notifier_block audit_nb; + + struct nvmem_device *nvmem; + + struct miscdevice miscdev; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dfs; +#endif + + u32 version; +}; + +/** + * call_secvio_config() - Wrapper for imx_sc_seco_secvio_config() + * + * @dev: secvio device + * @id: ID of the register, ie the offset of the first register of the set + * @access: Write (1) or Read (0) the registers + * @data0: Data for the first register + * @data1: Data for the second register + * @data2: Data for the third register + * @data3: Data for the fourth register + * @data4: Data for the fifth register + * @size: Number of register to configure + * + * Return: + * 0 - OK + * < 0 - error. + */ +int call_secvio_config(struct device *dev, u8 id, u8 access, u32 *data0, + u32 *data1, u32 *data2, u32 *data3, u32 *data4, u8 size); + +#ifdef CONFIG_DEBUG_FS +extern +int imx_secvio_sc_debugfs(struct device *dev); +#else +static inline +int imx_secvio_sc_debugfs(struct device *dev) +{ + return 0; +} +#endif /* CONFIG_DEBUG_FS */ + +#ifdef CONFIG_AUDIT +int report_to_audit_notify(struct notifier_block *nb, unsigned long status, + void *notif_info); +#else /* CONFIG_AUDIT */ +static inline +int report_to_audit_notify(struct notifier_block *nb, unsigned long status, + void *notif_info) +{ + return 0; +} +#endif /* CONFIG_AUDIT */ + +#endif /* SECVIO_SC_H */ diff --git a/drivers/soc/imx/secvio/imx-secvio-sc.c b/drivers/soc/imx/secvio/imx-secvio-sc.c new file mode 100644 index 0000000..1e0d6aa --- /dev/null +++ b/drivers/soc/imx/secvio/imx-secvio-sc.c @@ -0,0 +1,858 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + */ + +/* + * The SoC of the i.MX8 family contains a hardware block called SNVS + * (Secure Non-Volatile Storage). + * + * The i.MX8 (QM/QXP/DXL) SoC contains the (SNVS) block. This + * block can detect specific hardware attacks. Due to the presence of the SECO, + * this block can only be accessible using the SCFW API. + * + * This module interacts with the SCU which relays request to/from the SNVS block + * to detect if security violation occurred. + * + * The module exports an API to add processing when a SV is detected: + * - register_imx_secvio_sc_notifier + * - unregister_imx_secvio_sc_notifier + * - imx_secvio_sc_check_state + * - int_imx_secvio_sc_clear_state + * - imx_secvio_sc_enable_irq + * - imx_secvio_sc_disable_irq + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include "imx-secvio-sc-int.h" + +/* Definitions */ +static int int_imx_secvio_sc_enable_irq(struct device *dev); +static int int_imx_secvio_sc_disable_irq(struct device *dev); + +/* Reference on the driver_device */ +static struct device *gs_imx_secvio_sc_dev; + +/* Register IDs for sc_seco_secvio_config API */ +#define HPSVS_ID 0x18 +#define LPS_ID 0x4c +#define LPTDS_ID 0xa4 +#define HPVIDR_ID 0xf8 + +#define SECO_MINOR_VERSION_SUPPORT_SECVIO_TAMPER 0x53 +#define SECO_VERSION_MINOR_MASK GENMASK(15, 0) + +/* Notifier list for new CB */ +static BLOCKING_NOTIFIER_HEAD(imx_secvio_sc_notifier_chain); + +/** + * register_imx_secvio_sc_notifier() - Add function to secvio call chain + * + * @nb: notifier block of the function to add + * + * Return: + * 0 - OK + * < 0 - error. + */ +int register_imx_secvio_sc_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&imx_secvio_sc_notifier_chain, + nb); +} +EXPORT_SYMBOL(register_imx_secvio_sc_notifier); + +/** + * unregister_imx_secvio_sc_notifier() - Remove function to secvio call chain + * + * @nb: notifier block of the function to add + * + * Return: + * 0 - OK + * < 0 - error. + */ +int unregister_imx_secvio_sc_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&imx_secvio_sc_notifier_chain, + nb); +} +EXPORT_SYMBOL(unregister_imx_secvio_sc_notifier); + +/** + * if_imx_scu_irq_register_notifier() - Wrapper for imx_scu_irq_register_notifier + * + * Can be used for devm actions + * + * @nb: notifier block of the function to add + */ +static void if_unregister_imx_secvio_sc_notifier(void *nb) +{ + unregister_imx_secvio_sc_notifier(nb); +} + +/** + * imx_secvio_sc_notifier_call_chain() - Call secvio notifier chain + * + * @info: The structure containing the info to pass to notified functions + * + * Return: + * 0 - OK + * < 0 - error. + */ +static +int imx_secvio_sc_notifier_call_chain(struct secvio_sc_notifier_info *info) +{ + return blocking_notifier_call_chain(&imx_secvio_sc_notifier_chain, 0, + (void *)info); +} + +int call_secvio_config(struct device *dev, u8 id, u8 access, u32 *data0, + u32 *data1, u32 *data2, u32 *data3, u32 *data4, u8 size) +{ + int ret = 0; + struct imx_secvio_sc_data *data; + + data = dev_get_drvdata(dev); + + ret = imx_sc_seco_secvio_config(data->ipc_handle, id, access, data0, + data1, data2, data3, data4, size); + if (ret) + dev_err(dev, "Fail %s secvio config %d", + ((access) ? "write" : "read"), ret); + + return ret; +} + +/** + * int_imx_secvio_sc_get_state() - Get the state of secvio and tamper + * + * @dev: secvio device + * @info: The structure to use to store the status + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int int_imx_secvio_sc_get_state(struct device *dev, + struct secvio_sc_notifier_info *info) +{ + struct secvio_sc_notifier_info _info = {0}; + struct secvio_sc_notifier_info *p_info; + int ret = 0, ret2 = 0; + + p_info = info ? info : &_info; + + /* Read secvio status */ + ret = call_secvio_config(dev, HPSVS_ID, SECVIO_CONFIG_READ, + &p_info->hpsvs, NULL, NULL, NULL, NULL, 1); + if (ret) { + ret2 = ret; + dev_warn(dev, "Cannot read secvio status: %d\n", ret); + } + p_info->hpsvs &= HPSVS__ALL_SV__MASK; + + /* Read tampers status */ + ret = call_secvio_config(dev, LPS_ID, SECVIO_CONFIG_READ, + &p_info->lps, NULL, NULL, NULL, NULL, 1); + if (ret) { + ret2 = ret; + dev_warn(dev, "Cannot read tamper 1 status: %d\n", ret); + } + p_info->lps &= LPS__ALL_TP__MASK; + + ret = call_secvio_config(dev, LPTDS_ID, SECVIO_CONFIG_READ, + &p_info->lptds, NULL, NULL, NULL, NULL, 1); + if (ret) { + ret2 = ret; + dev_warn(dev, "Cannot read tamper 2 status: %d\n", ret); + } + p_info->lptds &= LPTDS__ALL_TP__MASK; + + dev_dbg(dev, "Status: %.8x, %.8x, %.8x\n", p_info->hpsvs, + p_info->lps, p_info->lptds); + + return ret2; +} + +/** + * imx_secvio_sc_get_state() - Wrapper for int_imx_secvio_sc_get_state + * + * Return: + * 0 - OK + * < 0 - error. + */ +inline int imx_secvio_sc_get_state(struct secvio_sc_notifier_info *info) +{ + if (!gs_imx_secvio_sc_dev) + return -EOPNOTSUPP; + + return int_imx_secvio_sc_get_state(gs_imx_secvio_sc_dev, info); +} +EXPORT_SYMBOL(imx_secvio_sc_get_state); + +/** + * int_imx_secvio_sc_check_state() - Get the state and call chain of notifier + * if there is a status + * + * @dev: secvio device + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int int_imx_secvio_sc_check_state(struct device *dev) +{ + struct secvio_sc_notifier_info info = {0}; + int ret = 0; + + ret = int_imx_secvio_sc_get_state(dev, &info); + if (ret) { + dev_err(dev, "Failed to get secvio state\n"); + goto exit; + } + + /* Call chain of CB registered to this module if status detected */ + if (info.hpsvs || info.lps || info.lptds) + if (imx_secvio_sc_notifier_call_chain(&info)) + dev_warn(dev, + "Issues when calling the notifier chain\n"); + +exit: + return ret; +} + +/** + * imx_secvio_sc_check_state() - Wrapper for int_imx_secvio_sc_check_state + * + * Return: + * 0 - OK + * < 0 - error. + */ +inline int imx_secvio_sc_check_state(void) +{ + if (!gs_imx_secvio_sc_dev) + return -EOPNOTSUPP; + + return int_imx_secvio_sc_check_state(gs_imx_secvio_sc_dev); +} +EXPORT_SYMBOL(imx_secvio_sc_check_state); + +/** + * imx_secvio_sc_notify() - Process event from SCU + * + * If the event is secvio we check the state, then + * re-enable the IRQ which has been disabled by SCU + * + * @nb: secvio device + * @event: The id of the IRQ received in a group + * @group: The group of the IRQ + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int imx_secvio_sc_notify(struct notifier_block *nb, + unsigned long event, void *group) +{ + struct imx_secvio_sc_data *data = + container_of(nb, struct imx_secvio_sc_data, + irq_nb); + struct device *dev = data->dev; + int ret = 0; + + /* Filter event for us */ + if (!((event & IMX_SC_IRQ_SECVIO) && + (*(u8 *)group == IMX_SC_IRQ_GROUP_WAKE))) + goto exit; + + dev_warn(dev, "secvio security violation detected\n"); + + ret = int_imx_secvio_sc_check_state(dev); + + /* Re-enable interrupt */ + ret = int_imx_secvio_sc_enable_irq(dev); + if (ret) + dev_err(dev, "Failed to enable IRQ\n"); + +exit: + return ret; +} + +/** + * int_imx_secvio_sc_clear_state() - Clear secvio and tamper state + * + * @dev: secvio device + * @hpsvs: high power security violation status to clear + * @lps: low power status to clear + * @lptds: low power tamper detector status to clear + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int int_imx_secvio_sc_clear_state(struct device *dev, u32 hpsvs, u32 lps, + u32 lptds) +{ + int ret = 0; + + ret = call_secvio_config(dev, HPSVS_ID, SECVIO_CONFIG_WRITE, &hpsvs, + NULL, NULL, NULL, NULL, 1); + if (ret) { + dev_err(dev, "Cannot clear secvio status: %d\n", ret); + goto exit; + } + + ret = call_secvio_config(dev, LPS_ID, SECVIO_CONFIG_WRITE, &lps, NULL, + NULL, NULL, NULL, 1); + if (ret) { + dev_err(dev, "Cannot clear tamper 1 status: %d\n", ret); + goto exit; + } + + ret = call_secvio_config(dev, LPTDS_ID, SECVIO_CONFIG_WRITE, &lptds, + NULL, NULL, NULL, NULL, 1); + if (ret) { + dev_err(dev, "Cannot clear tamper 2 status: %d\n", ret); + goto exit; + } + +exit: + return ret; +} + +/** + * imx_secvio_sc_clear_state() - Wrapper for imx_secvio_sc_clear_state + * + * @hpsvs: high power security violation status to clear + * @lps: low power status to clear + * @lptds: low power tamper detector status to clear + * + * Return: + * 0 - OK + * < 0 - error. + */ +inline int imx_secvio_sc_clear_state(u32 hpsvs, u32 lps, u32 lptds) +{ + if (!gs_imx_secvio_sc_dev) + return -EOPNOTSUPP; + + return int_imx_secvio_sc_clear_state(gs_imx_secvio_sc_dev, hpsvs, lps, + lptds); +} +EXPORT_SYMBOL(imx_secvio_sc_clear_state); + +/** + * report_to_user_notify() - Print to console the status + * + * @nb: notifier block + * @status: error code + * @notif_info: Pointer on structure containing the status of the secvio and + * tampers + * + * Return: + * 0 - OK + */ +static int report_to_user_notify(struct notifier_block *nb, + unsigned long status, void *notif_info) +{ + struct secvio_sc_notifier_info *info = notif_info; + struct imx_secvio_sc_data *data = + container_of(nb, struct imx_secvio_sc_data, + report_nb); + struct device *dev = data->dev; + + /* Information about the security violation */ + if (info->hpsvs & HPSVS__LP_SEC_VIO__MASK) + dev_info(dev, "SNVS secvio: LPSV\n"); + if (info->hpsvs & HPSVS__SW_LPSV__MASK) + dev_info(dev, "SNVS secvio: SW LPSV\n"); + if (info->hpsvs & HPSVS__SW_FSV__MASK) + dev_info(dev, "SNVS secvio: SW FSV\n"); + if (info->hpsvs & HPSVS__SW_SV__MASK) + dev_info(dev, "SNVS secvio: SW SV\n"); + if (info->hpsvs & HPSVS__SV5__MASK) + dev_info(dev, "SNVS secvio: SV 5\n"); + if (info->hpsvs & HPSVS__SV4__MASK) + dev_info(dev, "SNVS secvio: SV 4\n"); + if (info->hpsvs & HPSVS__SV3__MASK) + dev_info(dev, "SNVS secvio: SV 3\n"); + if (info->hpsvs & HPSVS__SV2__MASK) + dev_info(dev, "SNVS secvio: SV 2\n"); + if (info->hpsvs & HPSVS__SV1__MASK) + dev_info(dev, "SNVS secvio: SV 1\n"); + if (info->hpsvs & HPSVS__SV0__MASK) + dev_info(dev, "SNVS secvio: SV 0\n"); + + /* Information about the tampers */ + if (info->lps & LPS__ESVD__MASK) + dev_info(dev, "SNVS tamper: External SV\n"); + if (info->lps & LPS__ET2D__MASK) + dev_info(dev, "SNVS tamper: Tamper 2\n"); + if (info->lps & LPS__ET1D__MASK) + dev_info(dev, "SNVS tamper: Tamper 1\n"); + if (info->lps & LPS__WMT2D__MASK) + dev_info(dev, "SNVS tamper: Wire Mesh 2\n"); + if (info->lps & LPS__WMT1D__MASK) + dev_info(dev, "SNVS tamper: Wire Mesh 1\n"); + if (info->lps & LPS__VTD__MASK) + dev_info(dev, "SNVS tamper: Voltage\n"); + if (info->lps & LPS__TTD__MASK) + dev_info(dev, "SNVS tamper: Temperature\n"); + if (info->lps & LPS__CTD__MASK) + dev_info(dev, "SNVS tamper: Clock\n"); + if (info->lps & LPS__PGD__MASK) + dev_info(dev, "SNVS tamper: Power Glitch\n"); + if (info->lps & LPS__MCR__MASK) + dev_info(dev, "SNVS tamper: Monotonic Counter rollover\n"); + if (info->lps & LPS__SRTCR__MASK) + dev_info(dev, "SNVS tamper: Secure RTC rollover\n"); + if (info->lps & LPS__LPTA__MASK) + dev_info(dev, "SNVS tamper: Time alarm\n"); + + if (info->lptds & LPTDS__ET10D__MASK) + dev_info(dev, "SNVS tamper: Tamper 10\n"); + if (info->lptds & LPTDS__ET9D__MASK) + dev_info(dev, "SNVS tamper: Tamper 9\n"); + if (info->lptds & LPTDS__ET8D__MASK) + dev_info(dev, "SNVS tamper: Tamper 8\n"); + if (info->lptds & LPTDS__ET7D__MASK) + dev_info(dev, "SNVS tamper: Tamper 7\n"); + if (info->lptds & LPTDS__ET6D__MASK) + dev_info(dev, "SNVS tamper: Tamper 6\n"); + if (info->lptds & LPTDS__ET5D__MASK) + dev_info(dev, "SNVS tamper: Tamper 5\n"); + if (info->lptds & LPTDS__ET4D__MASK) + dev_info(dev, "SNVS tamper: Tamper 4\n"); + if (info->lptds & LPTDS__ET3D__MASK) + dev_info(dev, "SNVS tamper: Tamper 3\n"); + + return 0; +} + +/** + * int_imx_secvio_sc_enable_irq() - Enable the secvio IRQ in SCU + * + * @dev: secvio device + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int int_imx_secvio_sc_enable_irq(struct device *dev) +{ + int ret = 0, ret2; + u32 irq_status; + struct imx_secvio_sc_data *data; + + data = dev_get_drvdata(dev); + + /* Enable the IRQ */ + ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE, IMX_SC_IRQ_SECVIO, + true); + if (ret) { + dev_err(dev, "Cannot enable SCU IRQ: %d\n", ret); + goto exit; + } + + /* Enable interrupt */ + ret = imx_sc_seco_secvio_enable(data->ipc_handle); + if (ret) { + dev_err(dev, "Cannot enable SNVS irq: %d\n", ret); + goto exit; + }; + + /* Unmask interrupt */ + ret = imx_scu_irq_get_status(IMX_SC_IRQ_GROUP_WAKE, &irq_status); + if (ret) { + dev_err(dev, "Cannot unmask irq: %d\n", ret); + goto exit; + }; + +exit: + if (ret) { + ret2 = int_imx_secvio_sc_disable_irq(dev); + if (ret2) + dev_warn(dev, "Failed to disable the IRQ\n"); + } + + return ret; +} + +/** + * int_imx_secvio_sc_disable_irq() - Disable secvio IRQ + * + * @dev: secvio device + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int int_imx_secvio_sc_disable_irq(struct device *dev) +{ + int ret = 0; + struct imx_secvio_sc_data *data; + + data = dev_get_drvdata(dev); + + /* Disable the IRQ */ + ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE, IMX_SC_IRQ_SECVIO, + false); + if (ret) { + dev_err(dev, "Cannot disable SCU IRQ: %d\n", ret); + return ret; + } + + return 0; +} + +/** + * if_imx_secvio_sc_disable_irq() - Wrapper for int_imx_secvio_sc_disable_irq + * + * Can be used with devm + * + * @dev: secvio device + */ +static void if_imx_secvio_sc_disable_irq(void *dev) +{ + int_imx_secvio_sc_disable_irq(dev); +} + +/** + * imx_secvio_sc_open() - Store node info for ioctl + * + * @node: inode + * @file: file used to perform the ioctl + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int imx_secvio_sc_open(struct inode *node, struct file *filp) +{ + filp->private_data = node->i_private; + + return 0; +} + +/** + * imx_secvio_sc_ioctl() - IOCTL handler for the driver + * + * @file: file used to perform the ioctl + * @cmd: command to perform + * @arg: Pointer on structure with info for the command + * + * Return: + * 0 - OK + * < 0 - error. + */ +static long imx_secvio_sc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct device *dev = file->private_data; + struct secvio_sc_notifier_info info; + int ret; + + switch (cmd) { + case IMX_SECVIO_SC_GET_STATE: + ret = int_imx_secvio_sc_get_state(dev, &info); + if (ret) { + dev_err(dev, "Fail to get state\n"); + goto exit; + } + + ret = copy_to_user((void *)arg, &info, sizeof(info)); + if (ret) { + dev_err(dev, "Fail to copy info to user\n"); + ret = -EFAULT; + goto exit; + } + break; + case IMX_SECVIO_SC_CHECK_STATE: + ret = int_imx_secvio_sc_check_state(dev); + if (ret) { + dev_err(dev, "Fail to check state\n"); + goto exit; + } + break; + case IMX_SECVIO_SC_CLEAR_STATE: + ret = copy_from_user(&info, (void *)arg, sizeof(info)); + if (ret) { + dev_err(dev, "Fail to copy info from user\n"); + ret = -EFAULT; + goto exit; + } + + ret = int_imx_secvio_sc_clear_state(dev, info.hpsvs, info.lps, + info.lptds); + if (ret) { + dev_err(dev, "Fail to clear state\n"); + goto exit; + } + break; + default: + ret = -ENOIOCTLCMD; + } + +exit: + return ret; +} + +const static struct file_operations imx_secvio_sc_fops = { + .owner = THIS_MODULE, + .open = imx_secvio_sc_open, + .unlocked_ioctl = imx_secvio_sc_ioctl, +}; + +static void if_misc_deregister(void *miscdevice) +{ + misc_deregister(miscdevice); +} + +static void reset_global_dev(void *dev) +{ + gs_imx_secvio_sc_dev = NULL; +} + +/** + * imx_secvio_sc_setup() - Configure the driver + * + * @dev: secvio device + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int imx_secvio_sc_setup(struct device *dev) +{ + struct imx_secvio_sc_data *data; + u32 seco_version = 0; + bool own_secvio; + u32 irq_status; + int ret = 0; + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) { + ret = -ENOMEM; + goto exit; + } + + /* Allocate private data */ + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + dev_err(dev, "Failed to allocate mem for data\n"); + goto clean; + } + + data->dev = dev; + + dev_set_drvdata(dev, data); + + data->nvmem = devm_nvmem_device_get(dev, NULL); + if (IS_ERR(data->nvmem)) { + ret = PTR_ERR(data->nvmem); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to retrieve nvmem\n"); + + goto clean; + } + + /* Get a handle */ + ret = imx_scu_get_handle(&data->ipc_handle); + if (ret) { + dev_err(dev, "cannot get handle to scu: %d\n", ret); + goto clean; + }; + + /* Check the version of the SECO */ + ret = imx_sc_seco_build_info(data->ipc_handle, &seco_version, NULL); + if (ret) { + dev_err(dev, "Failed to get seco version\n"); + goto clean; + } + + if ((seco_version & SECO_VERSION_MINOR_MASK) < + SECO_MINOR_VERSION_SUPPORT_SECVIO_TAMPER) { + dev_err(dev, "SECO version %.8x doesn't support all secvio\n", + seco_version); + ret = -EOPNOTSUPP; + goto clean; + } + + /* Init debug FS */ + ret = imx_secvio_sc_debugfs(dev); + if (ret) { + dev_err(dev, "Failed to set debugfs\n"); + goto clean; + } + + /* Check we own the SECVIO */ + ret = imx_sc_rm_is_resource_owned(data->ipc_handle, IMX_SC_R_SECVIO); + if (ret < 0) { + dev_err(dev, "Failed to retrieve secvio ownership\n"); + goto clean; + } + + own_secvio = ret > 0; + if (!own_secvio) { + dev_err(dev, "Secvio resource is not owned\n"); + ret = -EPERM; + goto clean; + } + + /* Check IRQ exists and enable it */ + ret = imx_scu_irq_get_status(IMX_SC_IRQ_GROUP_WAKE, &irq_status); + if (ret) { + dev_err(dev, "Cannot get IRQ state: %d\n", ret); + goto clean; + } + + ret = int_imx_secvio_sc_enable_irq(dev); + if (ret) { + dev_err(dev, "Failed to enable IRQ\n"); + goto clean; + } + + ret = devm_add_action_or_reset(dev, if_imx_secvio_sc_disable_irq, dev); + if (ret) { + dev_err(dev, "Failed to add managed action to disable IRQ\n"); + goto clean; + } + + /* Register the notifier for IRQ from SNVS */ + data->irq_nb.notifier_call = imx_secvio_sc_notify; + ret = imx_scu_irq_register_notifier(&data->irq_nb); + if (ret) { + dev_err(dev, "Failed to register IRQ notification handler\n"); + goto clean; + } + + ret = devm_add_action_or_reset(dev, if_unregister_imx_secvio_sc_notifier, + &data->irq_nb); + if (ret) { + dev_err(dev, "Failed to add action to remove irq notify\n"); + goto clean; + } + + /* Register the notification for reporting to user */ + data->report_nb.notifier_call = report_to_user_notify; + ret = register_imx_secvio_sc_notifier(&data->report_nb); + if (ret) { + dev_err(dev, "Failed to register report notify handler\n"); + goto clean; + } + + ret = devm_add_action_or_reset(dev, if_unregister_imx_secvio_sc_notifier, + &data->report_nb); + if (ret) { + dev_err(dev, "Failed to add action to remove report notify\n"); + goto clean; + } + + /* Register the notification to report to audit FW */ + data->audit_nb.notifier_call = report_to_audit_notify; + ret = register_imx_secvio_sc_notifier(&data->audit_nb); + if (ret) { + dev_err(dev, "Failed to register report audit handler\n"); + goto clean; + } + + ret = devm_add_action(dev, if_unregister_imx_secvio_sc_notifier, + &data->audit_nb); + if (ret) { + dev_err(dev, "Failed to add action to remove audit notif\n"); + goto clean; + } + + /* Register misc device for IOCTL */ + data->miscdev.name = devm_kstrdup(dev, "secvio-sc", GFP_KERNEL); + data->miscdev.minor = MISC_DYNAMIC_MINOR; + data->miscdev.fops = &imx_secvio_sc_fops; + data->miscdev.parent = dev; + ret = misc_register(&data->miscdev); + if (ret) { + dev_err(dev, "failed to register misc device\n"); + goto exit; + } + + ret = devm_add_action_or_reset(dev, if_misc_deregister, &data->miscdev); + if (ret) { + dev_err(dev, "Failed to add action to unregister miscdev\n"); + goto clean; + } + + gs_imx_secvio_sc_dev = dev; + ret = devm_add_action_or_reset(dev, reset_global_dev, dev); + if (ret) { + dev_err(dev, "Failed to add action to disable global dev\n"); + goto clean; + } + + /* Process current state of the secvio and tampers */ + int_imx_secvio_sc_check_state(dev); + + devres_remove_group(dev, NULL); + + goto exit; + +clean: + devres_release_group(dev, NULL); + +exit: + return ret; +} + +/** + * imx_secvio_sc_probe() - Probe the driver + * + * @pdev: platform device + * + * Return: + * 0 - OK + * < 0 - error. + */ +static int imx_secvio_sc_probe(struct platform_device *pdev) +{ + int ret; + struct device *dev = &pdev->dev; + + ret = imx_secvio_sc_setup(dev); + if (ret && ret != -EPROBE_DEFER) + dev_err(dev, "Failed to setup\n"); + + return ret; +} + +static const struct of_device_id imx_secvio_sc_dt_ids[] = { + { .compatible = "fsl,imx-sc-secvio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_secvio_sc_dt_ids); + +static struct platform_driver imx_secvio_sc_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "imx-secvio-sc", + .of_match_table = imx_secvio_sc_dt_ids, + }, + .probe = imx_secvio_sc_probe, +}; +module_platform_driver(imx_secvio_sc_driver); + +MODULE_AUTHOR("Franck LENORMAND "); +MODULE_DESCRIPTION("NXP i.MX driver to handle SNVS secvio irq sent by SCFW"); +MODULE_LICENSE("GPL"); diff --git a/include/soc/imx/imx-secvio-sc.h b/include/soc/imx/imx-secvio-sc.h new file mode 100644 index 0000000..a26e2ff --- /dev/null +++ b/include/soc/imx/imx-secvio-sc.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019-2020 NXP + */ + +#ifndef _MISC_IMX_SECVIO_SC_H_ +#define _MISC_IMX_SECVIO_SC_H_ + +#include +#include + +/* Bitmask of the security violation status bit in the HPSVS register */ +#define HPSVS__LP_SEC_VIO__MASK BIT(31) +#define HPSVS__SW_LPSV__MASK BIT(15) +#define HPSVS__SW_FSV__MASK BIT(14) +#define HPSVS__SW_SV__MASK BIT(13) +#define HPSVS__SV5__MASK BIT(5) +#define HPSVS__SV4__MASK BIT(4) +#define HPSVS__SV3__MASK BIT(3) +#define HPSVS__SV2__MASK BIT(2) +#define HPSVS__SV1__MASK BIT(1) +#define HPSVS__SV0__MASK BIT(0) + +/* Bitmask of all security violation status bit in the HPSVS register */ +#define HPSVS__ALL_SV__MASK (HPSVS__LP_SEC_VIO__MASK | \ + HPSVS__SW_LPSV__MASK | \ + HPSVS__SW_FSV__MASK | \ + HPSVS__SW_SV__MASK | \ + HPSVS__SV5__MASK | \ + HPSVS__SV4__MASK | \ + HPSVS__SV3__MASK | \ + HPSVS__SV2__MASK | \ + HPSVS__SV1__MASK | \ + HPSVS__SV0__MASK) + +/* + * Bitmask of the security violation and tampers status bit in the LPS register + */ +#define LPS__ESVD__MASK BIT(16) +#define LPS__ET2D__MASK BIT(10) +#define LPS__ET1D__MASK BIT(9) +#define LPS__WMT2D__MASK BIT(8) +#define LPS__WMT1D__MASK BIT(7) +#define LPS__VTD__MASK BIT(6) +#define LPS__TTD__MASK BIT(5) +#define LPS__CTD__MASK BIT(4) +#define LPS__PGD__MASK BIT(3) +#define LPS__MCR__MASK BIT(2) +#define LPS__SRTCR__MASK BIT(1) +#define LPS__LPTA__MASK BIT(0) + +/* + * Bitmask of all security violation and tampers status bit in the LPS register + */ +#define LPS__ALL_TP__MASK (LPS__ESVD__MASK | \ + LPS__ET2D__MASK | \ + LPS__ET1D__MASK | \ + LPS__WMT2D__MASK | \ + LPS__WMT1D__MASK | \ + LPS__VTD__MASK | \ + LPS__TTD__MASK | \ + LPS__CTD__MASK | \ + LPS__PGD__MASK | \ + LPS__MCR__MASK | \ + LPS__SRTCR__MASK | \ + LPS__LPTA__MASK) + +/* + * Bitmask of the security violation and tampers status bit in the LPTDS + * register + */ +#define LPTDS__ET10D__MASK BIT(7) +#define LPTDS__ET9D__MASK BIT(6) +#define LPTDS__ET8D__MASK BIT(5) +#define LPTDS__ET7D__MASK BIT(4) +#define LPTDS__ET6D__MASK BIT(3) +#define LPTDS__ET5D__MASK BIT(2) +#define LPTDS__ET4D__MASK BIT(1) +#define LPTDS__ET3D__MASK BIT(0) + +/* + * Bitmask of all security violation and tampers status bit in the LPTDS + * register + */ +#define LPTDS__ALL_TP__MASK (LPTDS__ET10D__MASK | \ + LPTDS__ET9D__MASK | \ + LPTDS__ET8D__MASK | \ + LPTDS__ET7D__MASK | \ + LPTDS__ET6D__MASK | \ + LPTDS__ET5D__MASK | \ + LPTDS__ET4D__MASK | \ + LPTDS__ET3D__MASK) + +/** + * struct secvio_sc_notifier_info - Information about the status of the SNVS + * @hpsvs: status from register HPSVS + * @lps: status from register LPS + * @lptds: status from register LPTDS + */ +struct secvio_sc_notifier_info { + u32 hpsvs; + u32 lps; + u32 lptds; +}; + +/** + * register_imx_secvio_sc_notifier() - Register a notifier + * + * @nb: The notifier block structure + * + * Register a function to notify to the imx-secvio-sc module. The function + * will be notified when a check of the state of the SNVS happens: called by + * a user or triggered by an interruption form the SNVS. + * + * The struct secvio_sc_notifier_info is passed as data to the notifier. + * + * Return: 0 in case of success + */ +int register_imx_secvio_sc_notifier(struct notifier_block *nb); + +/** + * unregister_imx_secvio_sc_notifier() - Unregister a notifier + * + * @nb: The notifier block structure + * + * Return: 0 in case of success + */ +int unregister_imx_secvio_sc_notifier(struct notifier_block *nb); + +/** + * imx_secvio_sc_get_state() - Get the state of the SNVS + * + * @info: The structure containing the state of the SNVS + * + * Return: 0 in case of success + */ +int imx_secvio_sc_get_state(struct secvio_sc_notifier_info *info); + +/** + * imx_secvio_sc_check_state() - Check the state of the SNVS + * + * If a security violation or a tamper is detected, the list of notifier + * (registered using register_imx_secvio_sc_notifier() ) will be called + * + * Return: 0 in case of success + */ +int imx_secvio_sc_check_state(void); + +/** + * imx_secvio_sc_clear_state() - Clear the state of the SNVS + * + * @hpsvs: Value to write to HPSVS register + * @lps: Value to write to LPS register + * @lptds: Value to write to LPTDSregister + * + * The function will write the value provided to the corresponding register + * which will clear the status of the bits set. + * + * Return: 0 in case of success + */ +int imx_secvio_sc_clear_state(u32 hpsvs, u32 lps, u32 lptds); + +/* Commands of the ioctl interface */ +enum ioctl_cmd_t { + GET_STATE, + CHECK_STATE, + CLEAR_STATE, +}; + +/* Definition for the ioctl interface */ +#define IMX_SECVIO_SC_GET_STATE _IOR('S', GET_STATE, \ + struct secvio_sc_notifier_info) +#define IMX_SECVIO_SC_CHECK_STATE _IO('S', CHECK_STATE) +#define IMX_SECVIO_SC_CLEAR_STATE _IOW('S', CLEAR_STATE, \ + struct secvio_sc_notifier_info) + +#endif /* _MISC_IMX_SECVIO_SC_H_ */ -- 2.7.4