Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 11 Nov 2020 00:12:21 +0200
From:   Vladimir Oltean <olteanv@gmail.com>
To:     Florian Fainelli <f.fainelli@gmail.com>
Cc:     netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>,
        "maintainer:BROADCOM IPROC ARM ARCHITECTURE" 
        <bcm-kernel-feedback-list@broadcom.com>,
        Hauke Mehrtens <hauke@hauke-m.de>,
        =?utf-8?B?UmFmYcWCIE1pxYJlY2tp?= <zajec5@gmail.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        open list <linux-kernel@vger.kernel.org>,
        "moderated list:BROADCOM IPROC ARM ARCHITECTURE" 
        <linux-arm-kernel@lists.infradead.org>,
        Kurt Kanzenbach <kurt@kmk-computers.de>
Subject: Re: [PATCH 05/10] ARM: dts: BCM5301X: Provide defaults ports
 container node
Message-ID: <20201110221221.4sxx5h3346no7y3y@skbuf>
References: <20201110033113.31090-1-f.fainelli@gmail.com>
 <20201110033113.31090-6-f.fainelli@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201110033113.31090-6-f.fainelli@gmail.com>
Precedence: bulk

On Mon, Nov 09, 2020 at 07:31:08PM -0800, Florian Fainelli wrote:
> Provide an empty 'ports' container node with the correct #address-cells
> and #size-cells properties. This silences the following warning:
> 
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
> ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
>         'ports' is a required property
>         'ethernet-ports' is a required property
>         From schema:
> Documentation/devicetree/bindings/net/dsa/b53.yaml
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index 807580dd89f5..89993a8a6765 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -489,6 +489,10 @@ srab: ethernet-switch@18007000 {
>  		status = "disabled";
>  
>  		/* ports are defined in board DTS */
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};

This look a bit 'lone wolf' here. Not sure how much time you intend to
spend on this, but FWIW, others prefer to declare all ports in the SoC
DTSI with status = "disabled", and just enable the ones used per-board,
and add labels and PHY handles also per-board. Example: fsl-ls1028a.dtsi
and fsl-ls1028a-rdb.dts.

>  	};
>  
>  	rng: rng@18004000 {
> -- 
> 2.25.1
>