Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Zong Li <zong.li@sifive.com>
To:     paul.walmsley@sifive.com, palmer@dabbelt.com, sboyd@kernel.org,
        schwab@linux-m68k.org, pragnesh.patel@openfive.com,
        aou@eecs.berkeley.edu, mturquette@baylibre.com,
        yash.shah@sifive.com, linux-kernel@vger.kernel.org,
        linux-clk@vger.kernel.org, linux-riscv@lists.infradead.org
Cc:     Zong Li <zong.li@sifive.com>,
        Palmer Dabbelt <palmerdabbelt@google.com>,
        Pragnesh Patel <Pragnesh.patel@sifive.com>
Subject: [PATCH v3 2/3] clk: sifive: Use common name for prci configuration
Date:   Wed, 11 Nov 2020 17:35:13 +0800
Message-Id: <20201111093514.103155-3-zong.li@sifive.com>
In-Reply-To: <20201111093514.103155-1-zong.li@sifive.com>
References: <20201111093514.103155-1-zong.li@sifive.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
patch is prepared for fu740 support.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
---
 arch/riscv/Kconfig.socs     | 2 +-
 drivers/clk/sifive/Kconfig  | 6 +++---
 drivers/clk/sifive/Makefile | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 8a55f6156661..3284d5c291be 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -5,7 +5,7 @@ config SOC_SIFIVE
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select CLK_SIFIVE
-	select CLK_SIFIVE_FU540_PRCI
+	select CLK_SIFIVE_PRCI
 	select SIFIVE_PLIC
 	help
 	  This enables support for SiFive SoC platform hardware.
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index f3b4eb9cb0f5..ab48cf7e0105 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE
 
 if CLK_SIFIVE
 
-config CLK_SIFIVE_FU540_PRCI
-	bool "PRCI driver for SiFive FU540 SoCs"
+config CLK_SIFIVE_PRCI
+	bool "PRCI driver for SiFive SoCs"
 	select CLK_ANALOGBITS_WRPLL_CLN28HPC
 	help
 	  Supports the Power Reset Clock interface (PRCI) IP block found in
-	  FU540 SoCs.  If this kernel is meant to run on a SiFive FU540 SoC,
+	  FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
 	  enable this driver.
 
 endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 627effe2ece1..fe3e2cb4c4d8 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y += sifive-prci.o
 
-obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI)	+= fu540-prci.o
+obj-$(CONFIG_CLK_SIFIVE_PRCI)	+= fu540-prci.o
-- 
2.29.2