Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 12 Nov 2020 19:12:54 +0100
From:   Marco Elver <elver@google.com>
To:     "Paul E. McKenney" <paulmck@kernel.org>
Cc:     Steven Rostedt <rostedt@goodmis.org>,
        Anders Roxell <anders.roxell@linaro.org>,
        Andrew Morton <akpm@linux-foundation.org>,
        Alexander Potapenko <glider@google.com>,
        Dmitry Vyukov <dvyukov@google.com>,
        Jann Horn <jannh@google.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Linux-MM <linux-mm@kvack.org>,
        kasan-dev <kasan-dev@googlegroups.com>, rcu@vger.kernel.org,
        Peter Zijlstra <peterz@infradead.org>
Subject: Re: [PATCH] kfence: Avoid stalling work queue task without
 allocations
Message-ID: <20201112181254.GA3113918@elver.google.com>
References: <20201111133813.GA81547@elver.google.com>
 <20201111130543.27d29462@gandalf.local.home>
 <20201111182333.GA3249@paulmck-ThinkPad-P72>
 <20201111183430.GN517454@elver.google.com>
 <20201111192123.GB3249@paulmck-ThinkPad-P72>
 <20201111202153.GT517454@elver.google.com>
 <20201112001129.GD3249@paulmck-ThinkPad-P72>
 <CANpmjNNyZs6NrHPmomC4=9MPEvCy1bFA5R2pRsMhG7=c3LhL_Q@mail.gmail.com>
 <20201112161439.GA2989297@elver.google.com>
 <20201112175406.GF3249@paulmck-ThinkPad-P72>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="CE+1k2dSO48ffgeK"
Content-Disposition: inline
In-Reply-To: <20201112175406.GF3249@paulmck-ThinkPad-P72>
User-Agent: Mutt/1.14.6 (2020-07-11)
Precedence: bulk


--CE+1k2dSO48ffgeK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Thu, Nov 12, 2020 at 09:54AM -0800, Paul E. McKenney wrote:
> On Thu, Nov 12, 2020 at 05:14:39PM +0100, Marco Elver wrote:
> > On Thu, Nov 12, 2020 at 01:49PM +0100, Marco Elver wrote:
> > > On Thu, 12 Nov 2020 at 01:11, Paul E. McKenney <paulmck@kernel.org> wrote:
> > [...]
> > > > > This assert didn't fire yet, I just get more of the below. I'll keep
> > > > > rerunning, but am not too hopeful...
> > > >
> > > > Is bisection a possibility?
> > > 
> > > I've been running a bisection for past ~12h, and am making slow
> > > progress. It might be another 12h, but I think it'll get there.
> > 
> > Bisection gave me this:
> > 
> > | git bisect start
> > | # bad: [c07b306d7fa5680777e2132662d2e6c19fb53579] kfence: Avoid stalling work queue task without allocations
> > | git bisect bad c07b306d7fa5680777e2132662d2e6c19fb53579
> > | # good: [3cea11cd5e3b00d91caf0b4730194039b45c5891] Linux 5.10-rc2
> > | git bisect good 27598e7e73260ed0b2917eb02d4a515ebb578313
> > | # good: [3e5acbea719e66ef3be64fe74c99cc905ca697dc] Merge remote-tracking branch 'wireless-drivers-next/master' into master
> > | git bisect good 3e5acbea719e66ef3be64fe74c99cc905ca697dc
> > | # good: [491a5a9a2fea28353d99621b8abb83b6928b4e36] Merge remote-tracking branch 'sound-asoc/for-next' into master
> > | git bisect good 491a5a9a2fea28353d99621b8abb83b6928b4e36
> > | # bad: [502f8643d6e21c7e370a0b75131130cc51609055] Merge remote-tracking branch 'phy-next/next' into master
> > | git bisect bad 502f8643d6e21c7e370a0b75131130cc51609055
> > | # good: [6693cb1fa5ea7b91ec00f9404776a095713face5] Merge remote-tracking branch 'tip/auto-latest' into master
> > | git bisect good 6693cb1fa5ea7b91ec00f9404776a095713face5
> > | # bad: [b790e3afead9357195b6d1e1b6cd9b3521503ad2] Merge branch 'tglx-pc.2020.10.30a' into HEAD
> > | git bisect bad b790e3afead9357195b6d1e1b6cd9b3521503ad2
> > | # bad: [765b512bb3d639bfad7dd43c288ee085236c7267] Merge branches 'cpuinfo.2020.11.06a', 'doc.2020.11.06a', 'fixes.2020.11.02a', 'lockdep.2020.11.02a', 'tasks.2020.11.06a' and 'torture.2020.11.06a' into HEAD
> > | git bisect bad 765b512bb3d639bfad7dd43c288ee085236c7267
> > | # good: [01f9e708d9eae6335ae9ff25ab09893c20727a55] tools/rcutorture: Fix BUG parsing of console.log
> 
> So torture.2020.11.06a is OK.
> 
> > | git bisect good 01f9e708d9eae6335ae9ff25ab09893c20727a55
> > | # good: [1be6ab91e2db157faedb7f16ab0636a80745a073] srcu: Take early exit on memory-allocation failure
> 
> As is fixes.2020.11.02a.
> 
> > | git bisect good 1be6ab91e2db157faedb7f16ab0636a80745a073
> > | # good: [65e9eb1ccfe56b41a0d8bfec651ea014968413cb] rcu: Prevent RCU_LOCKDEP_WARN() from swallowing the condition
> 
> And lockdep.2020.11.02a.
> 
> > | git bisect good 65e9eb1ccfe56b41a0d8bfec651ea014968413cb
> > | # good: [c386e29d43728778ddd642fa73cc582bee684171] docs/rcu: Update the call_rcu() API
> 
> And doc.2020.11.06a.
> 
> > | git bisect good c386e29d43728778ddd642fa73cc582bee684171
> > | # good: [27c0f1448389baf7f309b69e62d4b531c9395e88] rcutorture: Make grace-period kthread report match RCU flavor being tested
> 
> And the first three commits of tasks.2020.11.06a.
> 
> > | git bisect good 27c0f1448389baf7f309b69e62d4b531c9395e88
> > | # good: [3fcd6a230fa7d03bffcb831a81b40435c146c12b] x86/cpu: Avoid cpuinfo-induced IPIing of idle CPUs
> 
> And cpuinfo.2020.11.06a.
> 
> > | git bisect good 3fcd6a230fa7d03bffcb831a81b40435c146c12b
> > | # good: [75dc2da5ecd65bdcbfc4d59b9d9b7342c61fe374] rcu-tasks: Make the units of ->init_fract be jiffies
> 
> And the remaining commit of tasks.2020.11.06a.
> 
> > | git bisect good 75dc2da5ecd65bdcbfc4d59b9d9b7342c61fe374
> > | # first bad commit: [765b512bb3d639bfad7dd43c288ee085236c7267] Merge branches 'cpuinfo.2020.11.06a', 'doc.2020.11.06a', 'fixes.2020.11.02a', 'lockdep.2020.11.02a', 'tasks.2020.11.06a' and 'torture.2020.11.06a' into HEAD
> > 
> > This doesn't look very satisfying, given it's the merge commit. :-/
> 
> So each individual branch is just fine, but the merge of them is not.  Fun.
> 
> These have been passing quite a bit of rcutorture over here, including
> preemptible kernels running !SMP, but admittedly on x86 rather than ARMv8.

Note that this is ARMv8 on QEMU on an x86 host i.e. emulated. And it's
really slow as a result. Together with a bunch of debug tools including
lockdep.

> One approach would be to binary-search the combinations of merges.
> Except that there are six of them, so there are 64 combinations, of
> which you have tested only 8 thus far (none, one each, and all).
> 
> But are you sure that the bisection points labeled "good" really are good?
> For example, what is the distribution of first failure times in the
> points labeled "bad" vs. the runtime used to make a "good" determination?
> Alternatively, just try a longer run on each of the commits feeding into
> the merge point.

Yeah, I'm having doubts, and this might be even more non-deterministic
that I thought and some 'good' could maybe be 'bad' if I had re-run
them? I don't know. One thing I can try is to make sure I run it more
than once, but I'm definitely not doing that manually, so let me try and
script something so I don't have to hand-hold the bisection overnight.
:-)

> > > > Failing that, please see the updated patch below.  This adds a few more
> > > > calls to lockdep_assert_irqs_disabled(), but perhaps more helpfully dumps
> > > > the current stack of the CPU that the RCU grace-period kthread wants to
> > > > run on in the case where this kthread has been starved of CPU.
> > > 
> > > Thanks, I will apply that after the bisection runs.
> > 
> > Here's a new log with it applied:
> 
> Even more strangeness!  ;-)
> 
> > | [  118.480959] Key type dns_resolver registered
> > | [  118.487752] registered taskstats version 1
> > | [  118.489798] Running tests on all trace events:
> > | [  118.490164] Testing all events: OK
> > | [  173.304186] Running tests again, along with the function tracer
> > | [  173.320155] Running tests on all trace events:
> > | [  173.331638] Testing all events: 
> > | [  173.485044] hrtimer: interrupt took 14340976 ns
> 
> Fourteen milliseconds, so annoying from a real-time perspective, but
> unlikely to be the cause of this.
> 
> Was the system responsive at this point, between three and ten minutes
> after boot?  Similar question for the other gaps in the dmesg log.
> The reason for the question is that workqueue's reported stall times
> don't span these intervals.

The system is so slow at this point that I can't get much out of it
either way, other than waiting and seeing if it proceeds...

> > | [  334.160218] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 15s!
> 
> It might be instructive to cause this code to provoke a backtrace.
> I suggest adding something like "trigger_single_cpu_backtrace(cpu)"
> in kernel/workqueue.c's function named wq_watchdog_timer_fn()
> somewhere within its "if" statement that is preceded with the "did we
> stall?" comment.  Or just search for "BUG: workqueue lockup - pool"
> within kernel/workqueue.c.
> 
> > | [  334.259490] Showing busy workqueues and worker pools:
> > | [  334.265398] workqueue events: flags=0x0
> > | [  334.289070]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  334.300659]     pending: vmstat_shepherd
> > | [  453.541827] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 10s!
> > | [  453.655731] BUG: workqueue lockup - pool cpus=0 flags=0x4 nice=0 stuck for 10s!
> > | [  453.759839] Showing busy workqueues and worker pools:
> > | [  453.784294] workqueue events: flags=0x0
> > | [  453.812207]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  453.822108]     pending: vmstat_shepherd
> > | [  453.839855] workqueue events_power_efficient: flags=0x82
> > | [  453.865152]   pwq 2: cpus=0 flags=0x4 nice=0 active=2/256 refcnt=4
> > | [  453.874553]     pending: neigh_periodic_work, do_cache_clean
> > | [  481.424362] BUG: workqueue lockup - pool cpus=0 flags=0x4 nice=0 stuck for 10s!
> > | [  481.508136] Showing busy workqueues and worker pools:
> > | [  481.524265] workqueue events: flags=0x0
> > | [  481.550480]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  481.560690]     pending: vmstat_shepherd
> > | [  481.571255] workqueue events_power_efficient: flags=0x82
> > | [  481.592515]   pwq 2: cpus=0 flags=0x4 nice=0 active=1/256 refcnt=3
> > | [  481.601153]     pending: neigh_periodic_work
> > | [  532.108407] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 10s!
> > | [  532.203476] Showing busy workqueues and worker pools:
> > | [  532.215930] workqueue events: flags=0x0
> > | [  532.244203]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  532.254428]     pending: vmstat_shepherd
> > | [  739.567892] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 19s!
> > | [  739.656419] Showing busy workqueues and worker pools:
> > | [  739.699514] workqueue events: flags=0x0
> > | [  739.705111]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  739.715393]     pending: vmstat_shepherd
> > | [  739.733403] workqueue events_power_efficient: flags=0x82
> > | [  739.739433]   pwq 2: cpus=0 flags=0x4 nice=0 active=2/256 refcnt=4
> > | [  739.748156]     pending: check_lifetime, neigh_periodic_work
> > | [  811.578165] BUG: workqueue lockup - pool cpus=0 flags=0x5 nice=0 stuck for 14s!
> > | [  811.602913] Showing busy workqueues and worker pools:
> > | [  811.620424] workqueue events: flags=0x0
> > | [  811.652479]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  811.662686]     pending: vmstat_shepherd
> > | [  811.683811] workqueue events_power_efficient: flags=0x82
> > | [  811.716123]   pwq 2: cpus=0 flags=0x5 nice=0 active=1/256 refcnt=3
> > | [  811.724857]     pending: neigh_periodic_work
> > | [  811.749989] pool 2: cpus=0 flags=0x5 nice=0 hung=14s workers=2 manager: 61 idle: 7
> > | [  822.456290] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 11s!
> > | [  822.600359] BUG: workqueue lockup - pool cpus=0 flags=0x5 nice=0 stuck for 25s!
> > | [  822.675814] Showing busy workqueues and worker pools:
> > | [  822.720098] workqueue events: flags=0x0
> > | [  822.747304]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  822.757174]     pending: vmstat_shepherd
> > | [  822.768047] workqueue events_power_efficient: flags=0x82
> > | [  822.799954]   pwq 2: cpus=0 flags=0x5 nice=0 active=1/256 refcnt=3
> > | [  822.808488]     pending: neigh_periodic_work
> > | [  822.831900] pool 2: cpus=0 flags=0x5 nice=0 hung=25s workers=2 manager: 61 idle: 7
> > | [  834.116239] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 22s!
> > | [  834.246557] BUG: workqueue lockup - pool cpus=0 flags=0x5 nice=0 stuck for 37s!
> > | [  834.271069] Showing busy workqueues and worker pools:
> > | [  834.276687] workqueue events: flags=0x0
> > | [  834.296267]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
> > | [  834.306148]     pending: vmstat_shepherd
> > | [  834.324273] workqueue events_power_efficient: flags=0x82
> > | [  834.344433]   pwq 2: cpus=0 flags=0x5 nice=0 active=2/256 refcnt=4
> > | [  834.352891]     pending: neigh_periodic_work, do_cache_clean
> > | [  834.384530] pool 2: cpus=0 flags=0x5 nice=0 hung=37s workers=2 manager: 61 idle: 7
> > | [  840.906940] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> > | [  840.912685] 	(detected by 0, t=3752 jiffies, g=2709, q=1)
> 
> CPU 0 detected the stall.
> 
> > | [  840.914587] rcu: All QSes seen, last rcu_preempt kthread activity 620 (4295099794-4295099174), jiffies_till_next_fqs=1, root ->qsmask 0x0
> 
> As before, the grace period is not stalled, but instead the grace-period
> kthread is failing to detect the end of an already-ended grace period.
> 
> > | [  840.925016] rcu: rcu_preempt kthread starved for 620 jiffies! g2709 f0x2 RCU_GP_CLEANUP(7) ->state=0x0 ->cpu=0
> 
> And CPU 0 is where the RCU grace-period kthread was last seen running.
> 
> > | [  840.930687] rcu: 	Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
> > | [  840.936056] rcu: RCU grace-period kthread stack dump:
> > | [  840.940433] task:rcu_preempt     state:R  running task     stack:    0 pid:   10 ppid:     2 flags:0x00000428
> > | [  840.949160] Call trace:
> > | [  840.952822]  dump_backtrace+0x0/0x278
> > | [  840.956816]  show_stack+0x30/0x80
> > | [  840.960643]  sched_show_task+0x1a8/0x240
> > | [  840.964684]  rcu_check_gp_kthread_starvation+0x170/0x358
> > | [  840.969113]  rcu_sched_clock_irq+0x744/0xd18
> > | [  840.973232]  update_process_times+0x68/0x98
> > | [  840.977308]  tick_sched_handle.isra.16+0x54/0x80
> > | [  840.981504]  tick_sched_timer+0x64/0xd8
> > | [  840.985500]  __hrtimer_run_queues+0x2a4/0x750
> > | [  840.989628]  hrtimer_interrupt+0xf4/0x2a0
> > | [  840.993669]  arch_timer_handler_virt+0x44/0x70
> > | [  840.997841]  handle_percpu_devid_irq+0xfc/0x4d0
> > | [  841.002043]  generic_handle_irq+0x50/0x70
> > | [  841.006098]  __handle_domain_irq+0x9c/0x120
> > | [  841.010188]  gic_handle_irq+0xcc/0x108
> > | [  841.014132]  el1_irq+0xbc/0x180
> > | [  841.017935]  arch_local_irq_restore+0x4/0x8
> > | [  841.021993]  trace_preempt_on+0xf4/0x190
> > | [  841.026016]  preempt_schedule_common+0x12c/0x1b0
> > | [  841.030193]  preempt_schedule.part.88+0x20/0x28
> > | [  841.034373]  preempt_schedule+0x20/0x28
> > | [  841.038369]  _raw_spin_unlock_irq+0x80/0x90
> > | [  841.042498]  rcu_gp_kthread+0xe5c/0x19a8
> > | [  841.046504]  kthread+0x174/0x188
> > | [  841.050320]  ret_from_fork+0x10/0x18
> > | [  841.054312] rcu: Stack dump where RCU grace-period kthread last ran:
> > | [  841.058980] Task dump for CPU 0:
> > | [  841.062736] task:rcu_preempt     state:R  running task     stack:    0 pid:   10 ppid:     2 flags:0x00000428
> 
> And RCU's grace-period kthread really is running on CPU 0 right now.
> It is just not making any forward progress.
> 
> > | [  841.071073] Call trace:
> > | [  841.074662]  dump_backtrace+0x0/0x278
> > | [  841.078596]  show_stack+0x30/0x80
> > | [  841.082386]  sched_show_task+0x1a8/0x240
> > | [  841.086367]  dump_cpu_task+0x48/0x58
> > | [  841.090311]  rcu_check_gp_kthread_starvation+0x214/0x358
> > | [  841.094736]  rcu_sched_clock_irq+0x744/0xd18
> > | [  841.098852]  update_process_times+0x68/0x98
> > | [  841.102949]  tick_sched_handle.isra.16+0x54/0x80
> > | [  841.107119]  tick_sched_timer+0x64/0xd8
> > | [  841.111127]  __hrtimer_run_queues+0x2a4/0x750
> > | [  841.115264]  hrtimer_interrupt+0xf4/0x2a0
> > | [  841.119319]  arch_timer_handler_virt+0x44/0x70
> > | [  841.123525]  handle_percpu_devid_irq+0xfc/0x4d0
> > | [  841.127690]  generic_handle_irq+0x50/0x70
> > | [  841.131702]  __handle_domain_irq+0x9c/0x120
> > | [  841.135779]  gic_handle_irq+0xcc/0x108
> > | [  841.139743]  el1_irq+0xbc/0x180
> 
> The code above this point was detecting and printing the RCU CPU stall
> warning.  The code below this point was doing what?
> 
> Any chance of getting file names and line numbers for the rest of this
> stack?

I've attached a version of the log with line numbers.

> > | [  841.143527]  arch_local_irq_restore+0x4/0x8
> 
> So we are just now restoring interrupts, hence our getting the
> interrupt at this point..
> 
> > | [  841.147612]  trace_preempt_on+0xf4/0x190
> 
> From within the trace code, which is apparently recording the fact
> that preemption is being enabled.
> 
> > | [  841.151656]  preempt_schedule_common+0x12c/0x1b0
> > | [  841.155869]  preempt_schedule.part.88+0x20/0x28
> > | [  841.160036]  preempt_schedule+0x20/0x28
> 
> I was not aware that releasing a raw spinlock could result in a direct
> call to preempt_schedule().
> 
> > | [  841.164051]  _raw_spin_unlock_irq+0x80/0x90
> > | [  841.168139]  rcu_gp_kthread+0xe5c/0x19a8
> 
> So the RCU grace-period kthread has spent many seconds attempting to
> release a lock?  Am I reading this correctly?  Mark Rutland, am I missing
> something here?
> 
> > | [  841.172134]  kthread+0x174/0x188
> > | [  841.175953]  ret_from_fork+0x10/0x18
> > | [  841.191371] 
> > | [  841.193648] ================================
> > | [  841.196605] WARNING: inconsistent lock state
> > | [  841.199764] 5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #23 Not tainted
> > | [  841.203564] --------------------------------
> 
> Has lockdep recorded the fact that the lock is actually released?
> It had better, given that interrupts are now enabled.
> 
> > | [  841.206550] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
> > | [  841.210074] rcu_preempt/10 [HC0[0]:SC0[0]:HE0:SE1] takes:
> > | [  841.213453] ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x4a0/0xd18
> > | [  841.221240] {IN-HARDIRQ-W} state was registered at:
> > | [  841.224538]   __lock_acquire+0x7bc/0x15b8
> > | [  841.227541]   lock_acquire+0x244/0x498
> > | [  841.230442]   _raw_spin_lock_irqsave+0x78/0x144
> > | [  841.233555]   rcu_sched_clock_irq+0x4a0/0xd18
> > | [  841.236621]   update_process_times+0x68/0x98
> > | [  841.239645]   tick_sched_handle.isra.16+0x54/0x80
> > | [  841.242801]   tick_sched_timer+0x64/0xd8
> > | [  841.245745]   __hrtimer_run_queues+0x2a4/0x750
> > | [  841.248842]   hrtimer_interrupt+0xf4/0x2a0
> > | [  841.251846]   arch_timer_handler_virt+0x44/0x70
> > | [  841.254976]   handle_percpu_devid_irq+0xfc/0x4d0
> > | [  841.258131]   generic_handle_irq+0x50/0x70
> > | [  841.261146]   __handle_domain_irq+0x9c/0x120
> > | [  841.264169]   gic_handle_irq+0xcc/0x108
> > | [  841.267096]   el1_irq+0xbc/0x180
> > | [  841.269844]   arch_local_irq_restore+0x4/0x8
> > | [  841.272881]   trace_preempt_on+0xf4/0x190
> > | [  841.275847]   preempt_schedule_common+0x12c/0x1b0
> > | [  841.279017]   preempt_schedule.part.88+0x20/0x28
> > | [  841.282149]   preempt_schedule+0x20/0x28
> > | [  841.285112]   _raw_spin_unlock_irq+0x80/0x90
> > | [  841.288154]   rcu_gp_kthread+0xe5c/0x19a8
> > | [  841.291175]   kthread+0x174/0x188
> > | [  841.293952]   ret_from_fork+0x10/0x18
> > | [  841.296780] irq event stamp: 39750
> > | [  841.299604] hardirqs last  enabled at (39749): [<ffffd787e6d85738>] rcu_irq_enter_irqson+0x48/0x68
> > | [  841.303961] hardirqs last disabled at (39750): [<ffffd787e6c122bc>] el1_irq+0x7c/0x180
> > | [  841.308042] softirqs last  enabled at (36704): [<ffffd787e6c10b58>] __do_softirq+0x650/0x6a4
> > | [  841.312250] softirqs last disabled at (36683): [<ffffd787e6cc0b80>] irq_exit+0x1a8/0x1b0
> > | [  841.316257] 
> > | [  841.316257] other info that might help us debug this:
> > | [  841.319834]  Possible unsafe locking scenario:
> > | [  841.319834] 
> > | [  841.323217]        CPU0
> > | [  841.325656]        ----
> > | [  841.328097]   lock(rcu_node_0);
> > | [  841.332433]   <Interrupt>
> > | [  841.334966]     lock(rcu_node_0);
> > | [  841.339379] 
> > | [  841.339379]  *** DEADLOCK ***
> > | [  841.339379] 
> > | [  841.342829] 1 lock held by rcu_preempt/10:
> > | [  841.345794]  #0: ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x4a0/0xd18
> > | [  841.354415] 
> > | [  841.354415] stack backtrace:
> > | [  841.357664] CPU: 0 PID: 10 Comm: rcu_preempt Not tainted 5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #23
> > | [  841.362249] Hardware name: linux,dummy-virt (DT)
> > | [  841.365352] Call trace:
> > | [  841.367862]  dump_backtrace+0x0/0x278
> > | [  841.370745]  show_stack+0x30/0x80
> > | [  841.373517]  dump_stack+0x138/0x1b0
> > | [  841.376339]  print_usage_bug+0x2d8/0x2f8
> > | [  841.379288]  mark_lock.part.46+0x370/0x480
> > | [  841.382304]  mark_held_locks+0x58/0x90
> > | [  841.385228]  lockdep_hardirqs_on_prepare+0xdc/0x298
> > | [  841.388452]  trace_hardirqs_on+0x90/0x388
> > | [  841.391434]  el1_irq+0xd8/0x180
> > | [  841.394178]  arch_local_irq_restore+0x4/0x8
> > | [  841.397186]  trace_preempt_on+0xf4/0x190
> > | [  841.400127]  preempt_schedule_common+0x12c/0x1b0
> > | [  841.403246]  preempt_schedule.part.88+0x20/0x28
> > | [  841.406347]  preempt_schedule+0x20/0x28
> > | [  841.409278]  _raw_spin_unlock_irq+0x80/0x90
> > | [  841.412290]  rcu_gp_kthread+0xe5c/0x19a8
> > | [  841.415237]  kthread+0x174/0x188
> > | [  841.418011]  ret_from_fork+0x10/0x18
> > | [  841.423450] BUG: scheduling while atomic: rcu_preempt/10/0x00000002
> > | [  841.431367] INFO: lockdep is turned off.
> > | [  841.439132] Modules linked in:
> > | [  841.450608] Preemption disabled at:
> > | [  841.452261] [<ffffd787e7fffec0>] preempt_schedule.part.88+0x20/0x28
> > | [  841.467324] CPU: 0 PID: 10 Comm: rcu_preempt Not tainted 5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #23
> > | [  841.471926] Hardware name: linux,dummy-virt (DT)
> > | [  841.475030] Call trace:
> > | [  841.477581]  dump_backtrace+0x0/0x278
> > | [  841.480451]  show_stack+0x30/0x80
> > | [  841.483220]  dump_stack+0x138/0x1b0
> > | [  841.486057]  __schedule_bug+0x8c/0xe8
> > | [  841.488949]  __schedule+0x7e8/0x890
> > | [  841.491801]  preempt_schedule_common+0x44/0x1b0
> > | [  841.494927]  preempt_schedule.part.88+0x20/0x28
> > | [  841.498048]  preempt_schedule+0x20/0x28
> > | [  841.500963]  _raw_spin_unlock_irq+0x80/0x90
> > | [  841.503988]  rcu_gp_kthread+0xe5c/0x19a8
> > | [  841.506965]  kthread+0x174/0x188
> > | [  841.509732]  ret_from_fork+0x10/0x18

--CE+1k2dSO48ffgeK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="bug.log"

Testing all events: OK
Running tests again, along with the function tracer
Running tests on all trace events:
Testing all events: 
hrtimer: interrupt took 14340976 ns
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 15s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 10s!
BUG: workqueue lockup - pool cpus=0 flags=0x4 nice=0 stuck for 10s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
workqueue events_power_efficient: flags=0x82
  pwq 2: cpus=0 flags=0x4 nice=0 active=2/256 refcnt=4
    pending: neigh_periodic_work, do_cache_clean
BUG: workqueue lockup - pool cpus=0 flags=0x4 nice=0 stuck for 10s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
workqueue events_power_efficient: flags=0x82
  pwq 2: cpus=0 flags=0x4 nice=0 active=1/256 refcnt=3
    pending: neigh_periodic_work
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 10s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 19s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
workqueue events_power_efficient: flags=0x82
  pwq 2: cpus=0 flags=0x4 nice=0 active=2/256 refcnt=4
    pending: check_lifetime, neigh_periodic_work
BUG: workqueue lockup - pool cpus=0 flags=0x5 nice=0 stuck for 14s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
workqueue events_power_efficient: flags=0x82
  pwq 2: cpus=0 flags=0x5 nice=0 active=1/256 refcnt=3
    pending: neigh_periodic_work
pool 2: cpus=0 flags=0x5 nice=0 hung=14s workers=2 manager: 61 idle: 7
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 11s!
BUG: workqueue lockup - pool cpus=0 flags=0x5 nice=0 stuck for 25s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
workqueue events_power_efficient: flags=0x82
  pwq 2: cpus=0 flags=0x5 nice=0 active=1/256 refcnt=3
    pending: neigh_periodic_work
pool 2: cpus=0 flags=0x5 nice=0 hung=25s workers=2 manager: 61 idle: 7
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 22s!
BUG: workqueue lockup - pool cpus=0 flags=0x5 nice=0 stuck for 37s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_shepherd
workqueue events_power_efficient: flags=0x82
  pwq 2: cpus=0 flags=0x5 nice=0 active=2/256 refcnt=4
    pending: neigh_periodic_work, do_cache_clean
pool 2: cpus=0 flags=0x5 nice=0 hung=37s workers=2 manager: 61 idle: 7
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
	(detected by 0, t=3752 jiffies, g=2709, q=1)
rcu: All QSes seen, last rcu_preempt kthread activity 620 (4295099794-4295099174), jiffies_till_next_fqs=1, root ->qsmask 0x0
rcu: rcu_preempt kthread starved for 620 jiffies! g2709 f0x2 RCU_GP_CLEANUP(7) ->state=0x0 ->cpu=0
rcu: 	Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt     state:R  running task     stack:    0 pid:   10 ppid:     2 flags:0x00000428
Call trace:
 dump_backtrace+0x0/0x278 arch/arm64/kernel/stacktrace.c:100
 show_stack+0x30/0x80 arch/arm64/kernel/stacktrace.c:196
 sched_show_task+0x1a8/0x240 kernel/sched/core.c:6445
 rcu_check_gp_kthread_starvation+0x170/0x358 kernel/rcu/tree_stall.h:469
 print_other_cpu_stall kernel/rcu/tree_stall.h:544 [inline]
 check_cpu_stall kernel/rcu/tree_stall.h:664 [inline]
 rcu_pending kernel/rcu/tree.c:3752 [inline]
 rcu_sched_clock_irq+0x744/0xd18 kernel/rcu/tree.c:2581
 update_process_times+0x68/0x98 kernel/time/timer.c:1709
 tick_sched_handle.isra.16+0x54/0x80 kernel/time/tick-sched.c:176
 tick_sched_timer+0x64/0xd8 kernel/time/tick-sched.c:1328
 __run_hrtimer kernel/time/hrtimer.c:1519 [inline]
 __hrtimer_run_queues+0x2a4/0x750 kernel/time/hrtimer.c:1583
 hrtimer_interrupt+0xf4/0x2a0 kernel/time/hrtimer.c:1645
 timer_handler drivers/clocksource/arm_arch_timer.c:647 [inline]
 arch_timer_handler_virt+0x44/0x70 drivers/clocksource/arm_arch_timer.c:658
 handle_percpu_devid_irq+0xfc/0x4d0 kernel/irq/chip.c:930
 generic_handle_irq_desc include/linux/irqdesc.h:152 [inline]
 generic_handle_irq+0x50/0x70 kernel/irq/irqdesc.c:650
 __handle_domain_irq+0x9c/0x120 kernel/irq/irqdesc.c:687
 handle_domain_irq include/linux/irqdesc.h:170 [inline]
 gic_handle_irq+0xcc/0x108 drivers/irqchip/irq-gic.c:370
 el1_irq+0xbc/0x180 arch/arm64/kernel/entry.S:651
 arch_local_irq_restore+0x4/0x8 arch/arm64/include/asm/irqflags.h:124
 trace_preempt_enable_rcuidle include/trace/events/preemptirq.h:55 [inline]
 trace_preempt_on+0xf4/0x190 kernel/trace/trace_preemptirq.c:123
 preempt_latency_stop kernel/sched/core.c:4197 [inline]
 preempt_schedule_common+0x12c/0x1b0 kernel/sched/core.c:4682
 preempt_schedule.part.88+0x20/0x28 kernel/sched/core.c:4706
 preempt_schedule+0x20/0x28 kernel/sched/core.c:4707
 __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:169 [inline]
 _raw_spin_unlock_irq+0x80/0x90 kernel/locking/spinlock.c:199
 rcu_gp_cleanup kernel/rcu/tree.c:2046 [inline]
 rcu_gp_kthread+0xe5c/0x19a8 kernel/rcu/tree.c:2119
 kthread+0x174/0x188 kernel/kthread.c:292
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:961
rcu: Stack dump where RCU grace-period kthread last ran:
Task dump for CPU 0:
task:rcu_preempt     state:R  running task     stack:    0 pid:   10 ppid:     2 flags:0x00000428
Call trace:
 dump_backtrace+0x0/0x278 arch/arm64/kernel/stacktrace.c:100
 show_stack+0x30/0x80 arch/arm64/kernel/stacktrace.c:196
 sched_show_task+0x1a8/0x240 kernel/sched/core.c:6445
 dump_cpu_task+0x48/0x58 kernel/sched/core.c:8428
 rcu_check_gp_kthread_starvation+0x214/0x358 kernel/rcu/tree_stall.h:474
 print_other_cpu_stall kernel/rcu/tree_stall.h:544 [inline]
 check_cpu_stall kernel/rcu/tree_stall.h:664 [inline]
 rcu_pending kernel/rcu/tree.c:3752 [inline]
 rcu_sched_clock_irq+0x744/0xd18 kernel/rcu/tree.c:2581
 update_process_times+0x68/0x98 kernel/time/timer.c:1709
 tick_sched_handle.isra.16+0x54/0x80 kernel/time/tick-sched.c:176
 tick_sched_timer+0x64/0xd8 kernel/time/tick-sched.c:1328
 __run_hrtimer kernel/time/hrtimer.c:1519 [inline]
 __hrtimer_run_queues+0x2a4/0x750 kernel/time/hrtimer.c:1583
 hrtimer_interrupt+0xf4/0x2a0 kernel/time/hrtimer.c:1645
 timer_handler drivers/clocksource/arm_arch_timer.c:647 [inline]
 arch_timer_handler_virt+0x44/0x70 drivers/clocksource/arm_arch_timer.c:658
 handle_percpu_devid_irq+0xfc/0x4d0 kernel/irq/chip.c:930
 generic_handle_irq_desc include/linux/irqdesc.h:152 [inline]
 generic_handle_irq+0x50/0x70 kernel/irq/irqdesc.c:650
 __handle_domain_irq+0x9c/0x120 kernel/irq/irqdesc.c:687
 handle_domain_irq include/linux/irqdesc.h:170 [inline]
 gic_handle_irq+0xcc/0x108 drivers/irqchip/irq-gic.c:370
 el1_irq+0xbc/0x180 arch/arm64/kernel/entry.S:651
 arch_local_irq_restore+0x4/0x8 arch/arm64/include/asm/irqflags.h:124
 trace_preempt_enable_rcuidle include/trace/events/preemptirq.h:55 [inline]
 trace_preempt_on+0xf4/0x190 kernel/trace/trace_preemptirq.c:123
 preempt_latency_stop kernel/sched/core.c:4197 [inline]
 preempt_schedule_common+0x12c/0x1b0 kernel/sched/core.c:4682
 preempt_schedule.part.88+0x20/0x28 kernel/sched/core.c:4706
 preempt_schedule+0x20/0x28 kernel/sched/core.c:4707
 __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:169 [inline]
 _raw_spin_unlock_irq+0x80/0x90 kernel/locking/spinlock.c:199
 rcu_gp_cleanup kernel/rcu/tree.c:2046 [inline]
 rcu_gp_kthread+0xe5c/0x19a8 kernel/rcu/tree.c:2119
 kthread+0x174/0x188 kernel/kthread.c:292
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:961

================================
WARNING: inconsistent lock state
5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #23 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
rcu_preempt/10 [HC0[0]:SC0[0]:HE0:SE1] takes:
ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: print_other_cpu_stall kernel/rcu/tree_stall.h:505 [inline]
ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: check_cpu_stall kernel/rcu/tree_stall.h:664 [inline]
ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_pending kernel/rcu/tree.c:3752 [inline]
ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x4a0/0xd18 kernel/rcu/tree.c:2581
{IN-HARDIRQ-W} state was registered at:
  mark_lock kernel/locking/lockdep.c:4293 [inline]
  mark_usage kernel/locking/lockdep.c:4302 [inline]
  __lock_acquire+0x7bc/0x15b8 kernel/locking/lockdep.c:4785
  lock_acquire+0x244/0x498 kernel/locking/lockdep.c:5436
  __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
  _raw_spin_lock_irqsave+0x78/0x144 kernel/locking/spinlock.c:159
  print_other_cpu_stall kernel/rcu/tree_stall.h:505 [inline]
  check_cpu_stall kernel/rcu/tree_stall.h:664 [inline]
  rcu_pending kernel/rcu/tree.c:3752 [inline]
  rcu_sched_clock_irq+0x4a0/0xd18 kernel/rcu/tree.c:2581
  update_process_times+0x68/0x98 kernel/time/timer.c:1709
  tick_sched_handle.isra.16+0x54/0x80 kernel/time/tick-sched.c:176
  tick_sched_timer+0x64/0xd8 kernel/time/tick-sched.c:1328
  __run_hrtimer kernel/time/hrtimer.c:1519 [inline]
  __hrtimer_run_queues+0x2a4/0x750 kernel/time/hrtimer.c:1583
  hrtimer_interrupt+0xf4/0x2a0 kernel/time/hrtimer.c:1645
  timer_handler drivers/clocksource/arm_arch_timer.c:647 [inline]
  arch_timer_handler_virt+0x44/0x70 drivers/clocksource/arm_arch_timer.c:658
  handle_percpu_devid_irq+0xfc/0x4d0 kernel/irq/chip.c:930
  generic_handle_irq_desc include/linux/irqdesc.h:152 [inline]
  generic_handle_irq+0x50/0x70 kernel/irq/irqdesc.c:650
  __handle_domain_irq+0x9c/0x120 kernel/irq/irqdesc.c:687
  handle_domain_irq include/linux/irqdesc.h:170 [inline]
  gic_handle_irq+0xcc/0x108 drivers/irqchip/irq-gic.c:370
  el1_irq+0xbc/0x180 arch/arm64/kernel/entry.S:651
  arch_local_irq_restore+0x4/0x8 arch/arm64/include/asm/irqflags.h:124
  trace_preempt_enable_rcuidle include/trace/events/preemptirq.h:55 [inline]
  trace_preempt_on+0xf4/0x190 kernel/trace/trace_preemptirq.c:123
  preempt_latency_stop kernel/sched/core.c:4197 [inline]
  preempt_schedule_common+0x12c/0x1b0 kernel/sched/core.c:4682
  preempt_schedule.part.88+0x20/0x28 kernel/sched/core.c:4706
  preempt_schedule+0x20/0x28 kernel/sched/core.c:4707
  __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:169 [inline]
  _raw_spin_unlock_irq+0x80/0x90 kernel/locking/spinlock.c:199
  rcu_gp_cleanup kernel/rcu/tree.c:2046 [inline]
  rcu_gp_kthread+0xe5c/0x19a8 kernel/rcu/tree.c:2119
  kthread+0x174/0x188 kernel/kthread.c:292
  ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:961
irq event stamp: 39750
hardirqs last  enabled at (39749): [<ffffd787e6d85738>] rcu_irq_enter_irqson+0x48/0x68 kernel/rcu/tree.c:1078
hardirqs last disabled at (39750): [<ffffd787e6c122bc>] el1_irq+0x7c/0x180 arch/arm64/kernel/entry.S:648
softirqs last  enabled at (36704): [<ffffd787e6c10b58>] __do_softirq+0x650/0x6a4 kernel/softirq.c:325
softirqs last disabled at (36683): [<ffffd787e6cc0b80>] do_softirq_own_stack include/linux/interrupt.h:568 [inline]
softirqs last disabled at (36683): [<ffffd787e6cc0b80>] invoke_softirq kernel/softirq.c:393 [inline]
softirqs last disabled at (36683): [<ffffd787e6cc0b80>] __irq_exit_rcu kernel/softirq.c:423 [inline]
softirqs last disabled at (36683): [<ffffd787e6cc0b80>] irq_exit+0x1a8/0x1b0 kernel/softirq.c:447

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(rcu_node_0);
  <Interrupt>
    lock(rcu_node_0);

 *** DEADLOCK ***

1 lock held by rcu_preempt/10:
 #0: ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: print_other_cpu_stall kernel/rcu/tree_stall.h:505 [inline]
 #0: ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: check_cpu_stall kernel/rcu/tree_stall.h:664 [inline]
 #0: ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_pending kernel/rcu/tree.c:3752 [inline]
 #0: ffffd787e91d4358 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x4a0/0xd18 kernel/rcu/tree.c:2581

stack backtrace:
CPU: 0 PID: 10 Comm: rcu_preempt Not tainted 5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #23
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace+0x0/0x278 arch/arm64/kernel/stacktrace.c:100
 show_stack+0x30/0x80 arch/arm64/kernel/stacktrace.c:196
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x138/0x1b0 lib/dump_stack.c:118
 print_usage_bug+0x2d8/0x2f8 kernel/locking/lockdep.c:3739
 valid_state kernel/locking/lockdep.c:3750 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3953 [inline]
 mark_lock.part.46+0x370/0x480 kernel/locking/lockdep.c:4410
 mark_lock kernel/locking/lockdep.c:4008 [inline]
 mark_held_locks+0x58/0x90 kernel/locking/lockdep.c:4011
 __trace_hardirqs_on_caller kernel/locking/lockdep.c:4029 [inline]
 lockdep_hardirqs_on_prepare+0xdc/0x298 kernel/locking/lockdep.c:4097
 trace_hardirqs_on+0x90/0x388 kernel/trace/trace_preemptirq.c:49
 el1_irq+0xd8/0x180 arch/arm64/kernel/entry.S:685
 arch_local_irq_restore+0x4/0x8 arch/arm64/include/asm/irqflags.h:124
 trace_preempt_enable_rcuidle include/trace/events/preemptirq.h:55 [inline]
 trace_preempt_on+0xf4/0x190 kernel/trace/trace_preemptirq.c:123
 preempt_latency_stop kernel/sched/core.c:4197 [inline]
 preempt_schedule_common+0x12c/0x1b0 kernel/sched/core.c:4682
 preempt_schedule.part.88+0x20/0x28 kernel/sched/core.c:4706
 preempt_schedule+0x20/0x28 kernel/sched/core.c:4707
 __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:169 [inline]
 _raw_spin_unlock_irq+0x80/0x90 kernel/locking/spinlock.c:199
 rcu_gp_cleanup kernel/rcu/tree.c:2046 [inline]
 rcu_gp_kthread+0xe5c/0x19a8 kernel/rcu/tree.c:2119
 kthread+0x174/0x188 kernel/kthread.c:292
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:961
BUG: scheduling while atomic: rcu_preempt/10/0x00000002
INFO: lockdep is turned off.
Modules linked in:
Preemption disabled at:
[<ffffd787e7fffec0>] preempt_schedule.part.88+0x20/0x28 kernel/sched/core.c:4706
CPU: 0 PID: 10 Comm: rcu_preempt Not tainted 5.10.0-rc3-next-20201110-00001-gc07b306d7fa5-dirty #23
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace+0x0/0x278 arch/arm64/kernel/stacktrace.c:100
 show_stack+0x30/0x80 arch/arm64/kernel/stacktrace.c:196
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x138/0x1b0 lib/dump_stack.c:118
 __schedule_bug+0x8c/0xe8 kernel/sched/core.c:4262
 schedule_debug kernel/sched/core.c:4289 [inline]
 __schedule+0x7e8/0x890 kernel/sched/core.c:4417
 preempt_schedule_common+0x44/0x1b0 kernel/sched/core.c:4681
 preempt_schedule.part.88+0x20/0x28 kernel/sched/core.c:4706
 preempt_schedule+0x20/0x28 kernel/sched/core.c:4707
 __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:169 [inline]
 _raw_spin_unlock_irq+0x80/0x90 kernel/locking/spinlock.c:199
 rcu_gp_cleanup kernel/rcu/tree.c:2046 [inline]
 rcu_gp_kthread+0xe5c/0x19a8 kernel/rcu/tree.c:2119
 kthread+0x174/0x188 kernel/kthread.c:292
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:961

--CE+1k2dSO48ffgeK--