Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 13 Nov 2020 06:39:21 -0800
From:   Guenter Roeck <linux@roeck-us.net>
To:     Wilken Gottwalt <wilken.gottwalt@posteo.net>
Cc:     linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
        Jonathan Corbet <corbet@lwn.net>, linux-hwmon@vger.kernel.org
Subject: Re: [PATCH] hwmon: fix corsair-psu fan rpm calculation
Message-ID: <20201113143921.GA26336@roeck-us.net>
References: <20201113121954.GA8488@monster.powergraphx.local>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201113121954.GA8488@monster.powergraphx.local>
User-Agent: Mutt/1.9.4 (2018-02-28)
Precedence: bulk

On Fri, Nov 13, 2020 at 01:19:54PM +0100, Wilken Gottwalt wrote:
> The correct fan rpm value is also a LINEAR11 value but without a factor.
> Verified by using the fan test button on the psu to let the fan spin up
> to maximum for some seconds.
> 
> Fixes: 933222c98445 ("hwmon: (corsair-psu) fix unintentional sign extension issue")
> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/corsair-psu.c | 7 +------
>  1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> index 5d19a888231a..99494056f4bd 100644
> --- a/drivers/hwmon/corsair-psu.c
> +++ b/drivers/hwmon/corsair-psu.c
> @@ -252,12 +252,7 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
>  		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF) * 1000;
>  		break;
>  	case PSU_CMD_FAN:
> -		/*
> -		 * this value is best guess, so the calculated value could be wrong, it is hard
> -		 * to ge the fan to spin in these semi-passive power supplies, which need a
> -		 * quite high load to do so
> -		 */
> -		*val = ((tmp & 0xFF) << 8) + ((tmp >> 8) & 0xFF);
> +		*val = corsairpsu_linear11_to_int(tmp & 0xFFFF);
>  		break;
>  	case PSU_CMD_RAIL_WATTS:
>  	case PSU_CMD_TOTAL_WATTS: